New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Broadview Park
If you need Door Replacement in Broadview Park, here’s the straight answer: a standard exterior door swap runs $1,100 to $2,400, a code-compliant impact-rated door for a pre-1994 home runs $2,800 to $5,500 including structural retrofitting, and interior slab replacements start around $350 per door. Our crews know Broadview Park’s unincorporated Broward County permitting path, the county inspections that still apply, and the frame conditions most 1950s-to-1980s homes present. Call (754) 354-1396 for a written price before any work starts.
We work throughout Broadview Park, from the ranch homes off SW 35th Avenue to the duplexes near State Road 7. Every quote is line-itemed, locked in writing, and covered by the 365-Day Done Right Promise.
Why Juniper Windows Fort Lauderdale Is Broadview Park’s Preferred Door Replacement Company
Broadview Park homeowners deal with something most Broward cities don’t: there’s no city hall to walk into. Permits for door replacement come from the county’s Building Code Services Division, and yes, inspections are still enforced even though the area is unincorporated. We file the paperwork, schedule the county wind-load inspection, and make sure the job isn’t left half-finished waiting on a bureaucrat’s calendar. That local knowledge is the difference between a two-week project and a two-month headache.
Sean Mackey leads our installation teams, and every technician who steps onto your property is background-checked and in uniform. We answer the phone live, 24/7. No voicemail maze. When you book a door replacement in Broadview Park, you get a live arrival time you can track on your phone, before-and-after photos of the work, and a digital invoice you can pay from a link. We call that the Relay Standard, and it’s how every project runs.
Our customers in Broadview Park consistently mention the written price in their reviews. They aren’t surprised at the end because there’s nothing to be surprised by. The number we quote is the number you pay. Parts, labor, county permit fees, and structural work if your opening needs it. All in the quote.
Door Frame Repair in Broadview Park
Door Frame Repair in Broadview Park usually means reframing an opening that was built decades before impact-rated hardware existed. Homes here from the 1950s through the 1980s often have skinny aluminum or wood jambs with no structural header. When a new impact door gets hung on that kind of frame, the weight and wind pressure twist the jamb, and the door starts sagging and jamming by the first summer. Fixing it right means pulling the casing, adding pressure-treated lumber and an LVL header, and re-anchoring the rough opening to code. Expect $450 to $1,400 depending on how much of the original frame is salvageable.
Rotted Jamb Replacement
Florida humidity and afternoon downpours eat wood jambs from the bottom up. We cut out the rot, sister in new pressure-treated stock, and flash the opening so water sheds away from the threshold. Most Broadview Park jamb repairs run $380 to $700 and take a single visit.
Reinforcing for Impact Hardware
A 1968 door frame was never designed to hold a 150-pound impact door with a multipoint lock. We add reinforced jamb brackets and longer structural screws into the studs. That’s the difference between a door that holds during a storm and one that blows in.
Interior Door Replacement in Broadview Park
Interior Door Replacement in Broadview Park comes up most often in the duplexes and ranch homes where hollow-core slabs from the 1970s have warped, cracked, or just look tired. Replacing an interior door means removing the old slab, trimming a new one to fit the existing jamb, and transferring or replacing the hardware. A standard hollow-core slab replacement runs $350 to $550 per door installed. Solid-core upgrades run $600 to $900 per door. These projects don’t require a permit because they don’t affect the building envelope.
Pre-Hung Units for Badly Out-of-True Openings
Some Broadview Park homes have settled enough that a slab swap won’t hang square. When the jamb itself is out of plumb, we install a pre-hung unit with an integrated frame. That runs $700 to $1,100 per opening and gives you a door that closes without a shoulder shove.
Matching Mid-Century Trim Profiles
Homes built in the 1960s around Broadview Park often have flat-stock or ranch-style casing that big-box stores don’t carry. We match the profile and stain grade so the new door doesn’t look like a patch job. No permit needed, but the visual upgrade is immediate.
Trusted Brands We Service in Broadview Park
We install and service doors from Therma-Tru, PGT, CGI, and ViewLux. For Broadview Park homes facing southwest, where afternoon sun beats on entry doors for hours, we often recommend Therma-Tru fiberglass with low-E insulated glass sidelites. It won’t warp or rust like the original steel doors from the 1960s. Because we stock hinges, thresholds, sweeps, and multipoint lock components for these brands locally, turnaround on repairs and replacements is fast. No waiting three weeks for a part to ship from a distributor in another state.
Common Door Replacement Problems We See in Broadview Park Homes
- Rusted-out aluminum entry doors on pre-1970 homes. The original steel or aluminum doors installed when these houses were built have been fighting salt air and humidity for 50-plus years. The bottom rails rot first, then the hinge screws strip out.
- Frames without structural headers twisting under wind pressure. Pre-1994 openings were built to hold a lightweight door, not an impact-rated one. The frame twists, the door binds, and the weatherstripping tears. We reframe before we hang anything.
- Standard strike plates on doors that should have reinforced jamb brackets. An older Broadview Park slab home with a standard strike plate is one hard kick or one storm surge from being open to the street. We install reinforced brackets on every exterior door we touch.
- Skipped permits causing stop-work orders. Because there’s no HOA and no city hall, some homeowners assume nobody’s watching. A neighbor complaint or an insurance claim audit triggers a county code enforcement stop-work order. We pull the permit before we pick up a screwdriver.
Pricing for Door Replacement in Broadview Park, FL
A basic exterior door swap in Broadview Park runs $1,100 to $2,400. An impact-rated door with frame reinforcement runs $2,800 to $5,500. Interior door slabs run $350 to $550 installed, pre-hung interior units $700 to $1,100. The biggest cost drivers are structural retrofitting (if your opening pre-dates the 1994 South Florida Building Code) and the glass package you choose for sidelites. Every quote includes the county permit fee, labor, materials, and disposal. Call (754) 354-1396 and we’ll walk the job with you, then hand you a written number that doesn’t move.
We Also Serve Cities Near Broadview Park
Our crews handle Door Replacement throughout central Broward County. We regularly work in Fort Lauderdale, Davie, Oakland Park, and Tamarac, and we’re scheduling estimates across Broadview Park every week. If you’re in a neighboring city and want the same written-price, county-permit-on-us approach, call us. The number’s the same: (754) 354-1396.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Broadview Park
Yes. Broadview Park is unincorporated Broward County, so permits come from the county’s Building Code Services Division, not a city hall. Exterior door replacements that affect the building envelope require a permit and a wind-load inspection. No HOA doesn’t mean no enforcement. Call (754) 354-1396 and we’ll handle the entire permit file from application to final inspection.
Usually yes. Most pre-1968 openings can be retrofitted by removing the interior casing, adding a structural header and pressure-treated jamb, and re-anchoring the rough opening. Whole-wall tear-out is rarely needed. The retrofit adds $800 to $1,500 to the project, and it’s the only way an impact door will pass the county’s wind-load inspection. We’ll show you exactly what the opening needs before we quote it.
County permit review for a straightforward door replacement typically adds 3 to 5 business days. If the home is a duplex or has any zoning overlay, plan for up to 10. We file the application online the same day you sign the quote, and we schedule the inspection as soon as the work is done. The job never sits half-finished waiting on paperwork.
For a southwest-facing duplex, we usually recommend a Therma-Tru fiberglass door with low-E glass. Fiberglass doesn’t absorb afternoon heat the way steel does, won’t rust, and holds up to daily direct sun without expanding. If budget is the bigger concern, a PGT impact-rated steel door with a thermal break runs less. Both meet Miami-Dade HVHZ standards. We’ll quote both options so you can decide with real numbers.
Yes. After the county wind-load inspection passes, we give you a copy of the permit, the inspection sign-off, and a letter documenting the impact-rated door, the reinforced frame, and the hardware used. That’s the package your insurance agent needs to apply the Florida 627.0629 wind mitigation credit. On a recent job off SW 35th Avenue, the homeowner’s wind mitigation report now qualifies them for the insurance credit, and we provided every piece of supporting paperwork the same week the inspection cleared.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Broadview Park and surrounding Broward County communities.
Ready for a written price? Call (754) 354-1396 and we’ll schedule a free estimate. A real person answers the phone, every time.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.