New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Broadview Park
Window installation in Broadview Park carries a specific set of rules most contractors never mention until the inspector shows up. Because Broadview Park is unincorporated, your permit comes from Broward County’s Building Code Division, not a city hall. And the county enforces Miami-Dade HVHZ anchoring standards that most pre-1994 Broadview Park homes were never built to meet. That means a simple sash swap often becomes a structural retrofit before the first window goes in. Our crews do this work weekly across Broadview Park, and we file the permit, schedule the inspection, and handle the wind mitigation paperwork so you don’t have to decode county requirements on your own. Call (754) 354-1396 for a free estimate on any window project, from a single picture window to a full-house replacement.
Why Juniper Windows Fort Lauderdale Is Broadview Park’s Preferred Window Installation Company
Broadview Park homeowners deal with a paperwork reality that people in incorporated cities never see. Broward County reviews every permit, inspects every anchoring point, and rejects any window that lacks a Florida Product Approval number. We handle that whole process. Our technicians know which pre-1994 openings will need new treated bucks and continuous jamb fastening before they pull the first sash, because we’ve done it on ranch homes off SW 42nd Terrace, duplexes near State Road 7, and manufactured homes throughout the neighborhood. That local experience means fewer surprises on inspection day.
Every job gets a written price before any work starts. No vague estimate that grows at the door. If you see a photo of the opening before we quote, that’s the opening we install. Our 365-Day Done Right Promise covers parts and labor in writing for a full year after installation. If something isn’t right, Sean Mackey’s team fixes it. No charge, no argument. And when you book, you get a live arrival time you can track, not a four-hour window that slips.
Calls are answered by a live person, 24/7. When a Broadview Park homeowner calls at 7 a.m. because a county reviewer flagged their permit packet, a real person picks up and gets you an answer. That’s the Relay Standard, and it’s how every Juniper location operates.
Picture Window in Broadview Park
A picture window in Broadview Park typically runs $900 – $2,600 installed, depending on size, glass package, and whether your 1950s-1980s opening needs structural retrofitting to meet Broward County anchoring requirements. Picture windows are fixed, non-operable panels that maximize light and sightlines. In Broadview Park’s older single-family homes, they often replace original jalousie or single-pane aluminum units that leak air and offer zero impact protection.
HVHZ Glass Packages
For a Broadview Park picture window, we recommend impact-rated laminated glass with a Miami-Dade NOA listing. That’s non-negotiable if you want your wind mitigation form to qualify for the 627.0629 insurance premium credit. We stock CWS and ES Windows fixed units with Florida Product Approval numbers already on file, so the permit packet clears review faster.
Why Homeowners Replace Old Fixed Panels
Single-pane picture windows in pre-1994 Broadview Park homes fail in two ways: the aluminum frames corrode from decades of humid subtropical exposure, and the glass itself offers no protection against wind-borne debris. When a branch breaks that window during a storm, water enters the wall cavity. We see this failure mode regularly on homes near the 441 corridor. A new impact-rated picture window eliminates that vulnerability and brightens the room at the same time.
Bay Window Installation in Broadview Park
Bay window installation in Broadview Park runs $3,800 – $8,500 for a standard three-panel unit, with the final price driven by projection depth, roof requirements, and whether your cantilever needs reinforcement to satisfy Broward County HVHZ load calculations. A bay window projects outward from the exterior wall, typically with a center picture unit flanked by two operable sashes. In Broadview Park’s mixed building stock, bays are common on 1960s and 1970s single-family homes, especially those facing east-west lots where light is limited.
Structural Work Under the Bay
Here’s what surprises Broadview Park homeowners: a bay window isn’t just a bigger window. It’s a structural element. The county reviews the cantilever support, the attachment to the existing wall, and the roof flashing. Pre-1994 homes often lack the continuous fastening and support blocking the inspector wants to see. We frame those reinforcements into the written quote before work starts, so there’s no change order halfway through.
Matching the Existing Elevation
Broadview Park has no HOA architectural review for most lots, but Broward County still enforces setback and structural requirements. A bay window projection counts toward those setbacks. We verify the dimensions against county records before ordering the unit, so you don’t pay for a custom bay that can’t legally be installed. ECO Window Systems and CWS both make bay configurations that meet Miami-Dade NOA standards without custom engineering delays.
Trusted Brands We Service in Broadview Park
We stock and install CWS, ES Windows, and ECO Window Systems products for Broadview Park customers, along with the PGT 5500 series our techs specified on that SW 42nd Terrace retrofit. Each brand carries Florida Product Approval numbers that Broward County accepts without supplementary engineering, which keeps your permit packet moving. Because we maintain local inventory and direct relationships with these manufacturers, replacement sashes and hardware for Broadview Park homes arrive in days, not weeks. If you already have one of these brands installed and need a matching unit, we can source it using the original order number etched on the frame.
Common Window Installation Problems We See in Broadview Park Homes
- Pre-1994 openings without through-bolted anchoring. Original aluminum and jalousie windows in Broadview Park were typically screwed into the buck, not bolted through to the concrete block. Broward County’s HVHZ inspectors check for continuous fastening, and corner-only anchors fail the review. We sister new treated bucks and through-bolt every opening before the new window lands.
- Online window purchases without Florida Product Approval numbers. Homeowners buy impact-rated glass from an online retailer, then Broward County rejects the permit because the product has no FL approval on file with the state. The sashes sit in a garage through hurricane season. We verify the FL number before ordering anything for a Broadview Park job.
- Non-pressure-treated lumber used for window bucks. South Florida humidity and wet-season rains rot untreated wood within two years. When the sill plate fails, the sash drops and the large-missile impact rating is void. We use treated stock on every Broadview Park opening, no exceptions.
- Wind-driven rain failing the water infiltration test. HVHZ requires a specific continuous fastening pattern and sealant protocol. Handymen who install jambs at the corners but skip the field points get water pooling in the track after the first storm. We follow the manufacturer’s NOA installation instructions to the letter, and our inspectors know it.
Pricing for Window Installation in Broadview Park, FL
A single double-hung replacement in Broadview Park typically runs $800 – $1,800 per opening, including the permit and structural retrofit of the existing buck if needed. Horizontal roller windows land at $700 – $1,500 per unit. A three-panel sliding window runs $2,200 – $4,500. Casement windows fall between $1,000 and $2,400. Add $150 – $400 per opening when the pre-1994 frame needs new anchoring, treated bucks, or sill repairs before installation. Bay and bow windows start around $3,800 and climb with projection and roof work. The permit and inspection fees for Broward County are line items on your written quote, never buried in “miscellaneous.” Call (754) 354-1396 to schedule a free estimate and get an exact written price for your Broadview Park home.
We Also Serve Cities Near Broadview Park
Our Window Installation team works throughout central Broward. If you’re in Fort Lauderdale, Davie, Oakland Park, or Tamarac, we bring the same written pricing, HVHZ expertise, and permit handling to your project. And if you’re reading this from Broadview Park, know that our crews are already familiar with your streets, your building codes, and the exact openings your home was built with.
Serving Broadview Park, FL - Our Local Coverage Area
We’re based in the Broadview Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Broadview Park
Yes. Broward County requires a permit for any window replacement in Broadview Park, regardless of the home’s age. Pre-1994 homes get extra scrutiny because the county assumes the original openings don’t meet current HVHZ anchoring standards. We file the permit and handle the review process. Call (754) 354-1396 to have your specific openings evaluated for free.
Your windows need a Miami-Dade County NOA (Notice of Acceptance) listing for HVHZ impact resistance. That means large-missile impact-rated laminated glass and frames tested to withstand wind-borne debris without shattering or pulling from the opening. The spec sheet printed on the frame must show the Florida Product Approval number. We install only brands with current NOA listings in our inventory.
Usually not. The inspector checks the anchoring between the frame and the structural wall, not just the squareness of the jamb. Pre-1994 Broadview Park homes were typically built with corner-only mechanical fasteners, which fail continuous-load HVHZ requirements. We can sometimes salvage the interior trim, but the frame-to-structure connection has to be redone. Get a free evaluation at (754) 354-1396 before you spend money on sashes that won’t pass.
Broward County window permit review typically takes 10 to 15 business days when the packet is complete, longer if there’s a backlog after a major storm. You cannot start demolition before the permit is issued, and doing so risks a stop-work order and re-inspection fees. We build that review window into the schedule so the job isn’t sitting half-finished. The permit gets filed the day you sign the written quote.
Yes, you can replace only your unit’s windows as long as the work stays within your property line and doesn’t alter the shared wall structure. Broward County treats each duplex unit as a separate permit scope for window replacement. The party wall itself is off-limits, but your windows, bucks, and exterior trim are yours to upgrade. We handle the permit language so the reviewer sees a clean scope that stays on your side.
Schedule Your Free Window Installation Estimate in Broadview Park
Before you buy windows online, before you sign with a handyman, before hurricane season peaks, get a written price from a crew that already knows Broadview Park’s unincorporated permit reality. Sean Mackey and the Juniper Windows Fort Lauderdale team will evaluate every opening, flag the retrofit work Broward County will require, and hand you a fixed number that doesn’t move. Call (754) 354-1396 to schedule your free estimate, or reach us any time, day or night, at that same number. A real person answers.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Broadview Park and central Broward County with window and door installations since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.