New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Fort Lauderdale, FL | Juniper Windows Fort Lauderdale
We provide independent Therma-Tru window and door service across Fort Lauderdale, from waterfront condos to 1950s ranch homes. The one thing that sets our Therma-Tru work apart here: we service and retrofit these doors in a High Velocity Hurricane Zone where salt air, UV exposure, and Miami-Dade code requirements create failure patterns most shops never see. If your Therma-Tru door is sagging, corroding, or failing a pressure test, call (754) 354-1396 and we’ll tell you straight whether it’s a repair or a replacement.
Why Fort Lauderdale Residents Choose Us for Therma-Tru Service
Our Therma-Tru sales & service experience is built on years of opening up Classic-Craft, Fiber-Classic, and Slim-Line units in this specific climate. Sean Mackey, our owner, learned construction fundamentals at Los Angeles Trade-Technical College, then spent nearly two decades learning exactly what Florida humidity and salt air do to a poorly sealed frame. He can explain a U-factor and SHGC rating, then tell you what those numbers mean on your July electric bill. We’re not an authorized Therma-Tru dealer, and we don’t pretend to be. What we are is a Fort Lauderdale crew that knows which Therma-Tru parts fail here first, and how to fix them without selling you a whole new door when you don’t need one.
Common Therma-Tru Windows & Doors Problems We Solve in Fort Lauderdale
- Fiberglass skin delamination on Classic-Craft doors near the water. Salt air works its way into the bottom rail on waterfront homes, especially along the Intracoastal and around Las Olas Isles. The fiberglass skin separates from the core, and once moisture gets in, the door starts to swell and warp. We repair the delamination when the structural core is solid, and replace the slab when it’s not.
- Warped or sagging Fiber-Classic panels from humidity and direct sun. Fort Lauderdale homes with west-facing entries see this constantly. The panel absorbs heat, the humidity swells the core, and the latch stops lining up. This is usually fixable with hinge adjustments, new weatherstripping, and sometimes a re-mortise, no new door required.
- Fogged glass and blown seals in Slim-Line sliding doors after hurricane season. The pressure cycling from tropical storms and hurricanes puts real stress on Therma-Tru Slim-Line glass. Once the seal goes, you get condensation between the panes. That’s a glass unit replacement, not a whole door replacement, and we do those in place.
- Corroded hinges and threshold screws within a block of the ocean. Even “maintenance-free” Therma-Tru doors aren’t immune to salt spray. We routinely pull out rusted steel screws on Intracoastal properties and replace them with marine-grade stainless. It’s a small fix that prevents a sagging door down the road.
- Leaky weatherstripping and failed sweeps on older Therma-Tru entry doors. The original seals on doors installed 10 to 15 years ago are often cracked or compressed flat, letting conditioned air leak and salt air creep in. We replace with genuine Therma-Tru weatherstripping and compression sweeps where available.
Therma-Tru Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Fort Lauderdale sits inside the High Velocity Hurricane Zone, but many of the older neighborhoods like Coral Ridge and Sailboat Bend were built decades before the current Florida Building Code existed. That means a lot of Therma-Tru door slabs in this area are installed in original wood frames that were never rated for today’s wind loads. We see this on Bayview Drive in Coral Ridge and throughout the 1950s-70s housing stock: a perfectly good Therma-Tru slab mounted into a frame that predates modern anchor requirements. Our Fort Lauderdale Window Replacement retrofit work typically means adding a Miami-Dade-rated anchor system to a 60-year-old opening rather than simply swapping the slab. It’s more work up front, but it’s the difference between a door that looks fine and one that actually holds during a named storm.
Therma-Tru Models & Products We Service in Fort Lauderdale
We service the Therma-Tru Classic-Craft Mahogany Collection, the Fiber-Classic Oak Collection, Slim-Line Sliding Patio Doors, and Pulse Series entry doors. For repairs, we use genuine Therma-Tru weatherstripping, corner pads, and adjustable hinges whenever they’re available. When a slab is out of production, we source US-made fiberglass-compatible knock-down frames and quality aftermarket multi-point locks that match the original drilling. Our stance is simple: repair the operable panel unless the frame is racked or the impact-rated glass is compromised. We keep common Therma-Tru weatherstripping profiles and adjustable sills on hand for faster Fort Lauderdale Window Installation turnaround, and anything we don’t stock gets ordered in days, not weeks.
Therma-Tru Service Pricing in Fort Lauderdale
Here’s what to budget for common Therma-Tru repairs in Fort Lauderdale, before any trip charge:
- Weatherstripping and sweep replacement: $85 to $180 per door
- Hinge adjustment and re-mortise for a sagging door: $120 to $250
- Slim-Line glass unit replacement (fogged panel): $400 to $850 depending on size
- Full slab replacement on a Classic-Craft or Fiber-Classic door: $1,200 to $2,800 installed
- Hurricane anchor retrofit to existing frame: $350 to $700
Your free estimate includes a written, itemized price before any work starts. No estimate that morphs into a surprise invoice. Call (754) 354-1396 for exact numbers on your door.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Fort Lauderdale
Yes, in most cases we can. The typical retrofit involves adding a Miami-Dade-rated anchor system, upgrading the hinges to code-compliant hardware, and checking that the slab itself is rated for the opening. If the original wood frame is solid, there’s no functional reason to replace it. Call (754) 354-1396 and we’ll assess your specific opening.
Not necessarily. Small surface cracks from salt-air intrusion are often repairable with a fiberglass patch and refinish, as long as the structural core hasn’t absorbed water. We check for delamination and swelling first. If the core is solid, you’re looking at a few hundred dollars, not a new door. If it’s rotted or separated, replacement is the honest call. Call (754) 354-1396 for an inspection.
That fog is a blown seal between the glass panes. Hurricanes and tropical storms create repeated pressure spikes that flex the glass and eventually crack the seal. Once it goes, humid air gets between the panes and condenses. The fix is replacing the insulated glass unit, not the whole door. Call (754) 354-1396 for a quote on your Slim-Line glass replacement.
Decorative glass is not impact-rated glass. Unless the door specifically carries a Miami-Dade NOA (Notice of Acceptance) for impact resistance, you’ll need shutters, a rated storm door, or an impact-rated replacement panel to meet Fort Lauderdale code. We can pull the door and check the glass marking for you. Call (754) 354-1396 if you’re unsure what you have.
You can absolutely replace just the weatherstripping and sweep. It’s one of the most common calls we take, and it usually runs under $200 including parts and labor. There’s no reason to replace a door that’s structurally fine just because the seals are shot. Call (754) 354-1396 and we’ll set it up.
Service Areas Near Fort Lauderdale
We serve the full Fort Lauderdale service area along with Therma-Tru service in Davie and Therma-Tru service in Oakland Park. We also take calls from Tamarac, Coconut Creek, and Hallandale Beach. If you’re within 30 minutes of Fort Lauderdale, we’ll come out for a free estimate.
Book Your Therma-Tru Service in Fort Lauderdale Today
If your Therma-Tru door is sagging, leaking, or showing signs of salt-air damage, don’t wait until the next storm cycle. Sean and our crew will give you a straight answer and a written price before any work starts. If we wouldn’t put it on our own house, we’re not recommending it for yours. Call (754) 354-1396 to schedule your free estimate.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Fort Lauderdale since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.