New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Windows & Doors in Davie, FL | Juniper Windows Fort Lauderdale
We provide independent Therma-Tru windows and doors service across Davie, from Davie Window Replacement and full-frame entry door replacements to hardware rebuilds on aging Fiber-Classic and Smooth-Star units. What makes our Therma-Tru work here different is that we know Davie’s pre-Andrew ranch homes rarely have square openings. Call (754) 354-1396 for a free estimate with a written price before anything starts.
Our crew has rebuilt hundreds of Therma-Tru door systems across Davie’s semi-rural, large-lot homes, many of which predate Hurricane Andrew. We’re not factory-authorized, and we don’t pretend to be. What we offer is something more useful: hands-on repair experience with Therma-Tru’s actual failure modes in South Florida humidity. Sean Mackey, our owner, learned framing fundamentals at Los Angeles Trade-Technical College, then spent two decades in Fort Lauderdale and Davie learning what salt air and afternoon heat do to a poorly sealed fiberglass door. We fit genuine Therma-Tru components where they’re non-negotiable, marine-grade aftermarket parts where they outperform, and we put the number in writing before the first screw turns.
Why Davie Residents Choose Us for Therma-Tru Service
Most window and door companies in Davie are happy to quote a replacement and walk away. We’d rather fix what’s fixable first. We’ve spent years learning Therma-Tru’s product line inside and out: Smooth-Star, Classic-Craft, Fiber-Classic, and Pulse. We know which hinge pockets strip out on 1980s ranch homes, which multi-point lock sets seize from coastal salt air, and which sill caps fail after a decade of pool splash. That means fewer misdiagnosed replacements and more repairs that actually hold.
We’re part of the Relay Home Co. family, founded in 2001, and every job runs on two commitments: a written price before work starts and the 365-Day Done Right Promise covering parts and labor for a full year. If a repair fails, we come back free. No charge, no argument. Sean’s standard phrase around the shop: “If I wouldn’t put it on my own house, I’m not recommending it for yours.” That’s the filter every Therma-Tru repair passes through before we hand you an estimate.
Common Therma-Tru Windows & Doors Problems We Solve in Davie
- Warped Fiber-Classic slabs on western exposures. Davie’s afternoon sun hits west-facing doors hard, and combined with summer humidity, fiberglass skins on Fiber-Classic doors can warp a noticeable amount. You’ll see it first as binding at the latch or top corner. We re-shim the opening, adjust hinge geometry, and in severe cases replace the slab with a properly spec’d unit.
- Corroded multi-point locks on Smooth-Star and Classic-Craft doors. Even 10 miles inland, Davie still gets salt-laden air carried in on coastal winds. Multi-point lock hardware on these Therma-Tru models corrodes faster than the factory expects. We replace lock sets with genuine Therma-Tru components since the geometry isn’t cross-compatible with generic parts.
- Sagging hinges and stripped screw holes on heavier Classic-Craft doors. Many 1970s and 1980s ranch homes in Davie have undersized framing around entry doors. A heavy Classic-Craft slab slowly works hinge screws loose. We drill, fill with hardwood dowels, install longer marine-grade screws, and re-align the leaf so the door swings true again.
- Failed corner seals and gasket compression on Pulse series doors. Davie’s summer thunderstorms hit fast and dump water quickly. Pulse doors with compressed bottom sweeps or degraded corner seals let water in where you’ll see it first on the interior floor near the strike plate. We replace seals, adjust compression, and water-test with a fan to confirm the fix.
- Out-of-square openings on pre-Andrew ranch homes. This is the most Davie-specific problem on the list. Homes along Shotgun Road and Orange Drive built before the 1992 code revisions often have door openings that are out of plumb by a half-inch or more. A new Therma-Tru door won’t fix that by itself. The opening has to be corrected with custom shimming and brickmould extensions, otherwise the slab will bind again within a season.
Therma-Tru Service in Davie: What Local Conditions Mean for Your Equipment
Here’s the detail that doesn’t show up on a generic Therma-Tru page. Davie’s pre-Andrew ranch homes along Shotgun Road and Orange Drive routinely have non-plumb, out-of-square door openings. The original framing settled, the headers shifted, and 30 years of humidity cycles moved things around. When an installer drops a new Therma-Tru door into that opening without correcting the framing, the slab binds from day one, the multipoint lock misalignes within months, and the homeowner assumes the door is the problem. It isn’t. We’ve rebuilt enough of these openings to know that a proper job on a western Davie ranch home often requires custom brickmould extensions, sill modifications, and re-shimming before the new unit even goes in. Suburban Fort Lauderdale and newer Weston subdivisions don’t have this issue because their door openings were framed after the 1992 code revisions and haven’t had four decades to settle. That’s the difference between knowing Therma-Tru as a product and knowing Davie as a place.
One recent job tells the story. A Classic-Craft door on a 1980s ranch off Orange Drive had warped 3/8 inch from afternoon heat, jamming the top ActiveLock point. Our tech removed the unit, planed the hinge leaf pocket, installed a reinforced corner seal, and re-shimmed the opening to square. The door now deadbolts with one finger and tested negative for water intrusion under a 35 mph fan. That repair cost far less than a full replacement, and it’ll hold because we fixed the opening, not just the door.
Therma-Tru Models & Products We Service in Davie
We service all four major Therma-Tru door lines: Smooth-Star (the smooth-skin fiberglass workhorse), Classic-Craft (the wood-grain embossed line that mimics real timber), Fiber-Classic (the textured fiberglass line common on 1990s and 2000s homes), and Pulse (the modern composite line with multi-point hardware). For parts, we fit genuine Therma-Tru components where cross-compatibility doesn’t exist: sill caps, drip edges, and multi-point lock sets. For hinge screws, weather seals, and threshold caps, we use marine-grade aftermarket parts that hold up better in Davie’s moisture than the originals. We also handle full-frame replacement for entry doors, hurricane impact windows, and sidelite conversions. If you’re considering upgrading a 1980s ranch from a single-pane slider to a Therma-Tru entry door with sidelites, we can spec that project with the right impact-rated glass for current South Florida code. See our full Therma-Tru sales & service page for a broader overview of what we cover.
Therma-Tru Service Pricing in Davie
Here are honest line-item ranges for typical Therma-Tru work in Davie so you can price the job before you even call:
- Hinge realignment or screw-hole repair: $90 – $150
- Weather seal or corner seal replacement: $110 – $180
- Multipoint lock set replacement (genuine Therma-Tru): $220 – $380
- Sill cap or threshold replacement: $180 – $320
- Full slab replacement (Fiber-Classic or Classic-Craft): $950 – $2,400 depending on size, glass, and hardware
- Full-frame entry door replacement with impact-rated glass: $2,800 – $6,500
What drives the final number: the condition of the existing opening (out-of-square framing costs more to correct), whether you need impact glass, and whether the hardware can be rebuilt or the slab needs replacing. Every estimate includes a written price before any work starts, so the number we quote is the number you’ll pay. Call (754) 354-1396 for a free estimate, and Sean will talk you through the exact scope for your door.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Windows & Doors in Davie
Yes, in many cases. If the existing frame is structurally sound and not rotted, we can reinforce it, re-shim the opening to square, and install an impact-rated Therma-Tru slab with upgraded hardware. If the frame has water damage or is badly out of plane, a full-frame replacement is the honest answer. We’ll tell you which path makes sense after we see the opening. Call (754) 354-1396 and we’ll take a look.
West-facing fiberglass doors in Davie absorb intense afternoon heat, which causes the skin to expand. If the door was installed in an out-of-square opening, that expansion is enough to push the top corner into the jamb. The fix is correcting the opening geometry and, if the slab has warped past tolerance, replacing it. This is a seasonal symptom, but the cause is structural year-round.
Yes. The Pulse line’s multipoint gearbox is prone to internal wear, especially in humid environments like Davie. When the gearbox fails, the door won’t secure properly even if the slab is fine. We replace the gearbox and lock points with genuine Therma-Tru parts. Estimate range: $220 – $380 depending on configuration. Call (754) 354-1396 for an exact quote.
Yes. We replace the aluminum sill cap and drip edge without touching the slab or frame. In Davie’s moisture, we recommend marine-grade aftermarket sill caps because they resist corrosion better than the original equipment. The whole job typically runs $180 – $320.
If the slider leaks air, frame is torqued, or you want better security and energy performance, yes. The conversion involves reframing the opening for Davie Window Installation, which is straightforward on a ranch home. Expect $2,800 – $6,500 for impact-rated glass and proper sill pan installation. We’ll spec it to current South Florida hurricane code and pull whatever permits Davie requires.
Service Areas Near Davie
We service Davie and the surrounding area, including Therma-Tru service in Fort Lauderdale, Therma-Tru service in Oakland Park, Tamarac, Coconut Creek, and Hallandale Beach. If you’re inside our Davie service area, call (754) 354-1396 and we’ll get you on the schedule.
Book Your Therma-Tru Service in Davie Today
Call (754) 354-1396 to schedule your free estimate. We’ll give you a written price before any work starts, a live arrival time you can track, and photo proof when the job’s wrapped. If it’s not done right, our 365-Day Done Right Promise covers it, in writing.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Davie and South Florida since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.