Awning & Hopper Windows in Fort Lauderdale, FL

Awning & Hopper Windows in Fort Lauderdale, FL

Awning windows hinge at the top and open outward from the bottom, while hopper windows hinge at the bottom and tilt inward from the top. Both are compact, practical choices for Florida homes where ventilation matters but wall space is limited, and both seal tight against wind-driven rain, which matters in Fort Lauderdale from June through November. Juniper Windows Fort Lauderdale installs both styles with the same written-price commitment we apply to every Window Installation in Fort Lauderdale project. Call (754) 354-1396 when you want a real quote, not a ballpark that drifts.

These are not the windows you think about until you need them. Then, suddenly, you’re standing in a laundry room that hasn’t had fresh air in three years, or a basement bathroom that smells like the last hurricane. Sean Mackey has been matching Fort Lauderdale homeowners with the right window for the right opening since 2001, and awning and hopper windows solve a specific set of problems that bigger window styles simply don’t.

We carry PGT, CGI, CWS, and ES Windows product lines, so when we spec an awning window for a second-story bathroom in Victoria Park or a hopper for a garage wall in Rio Vista, we’re choosing from the product families built for South Florida’s climate, not whatever happens to be in a warehouse.

Key Takeaways

• Awning windows hinge at the top and open outward; hopper windows hinge at the bottom and open inward.
• Both styles seal tighter than sliding windows when closed, which makes them smart for rain-heavy exposure and ground-floor privacy situations.
• Awning windows in Fort Lauderdale typically run $380 to $950 per window installed, depending on size, frame material, and impact-rating. Hoppers run $320 to $780.
• Juniper Windows Fort Lauderdale writes the price before work starts and backs every install with the 365-Day Done Right Promise, parts and labor, in writing.

When You Need Awning & Hopper Windows

These windows are niche by design. Here are the situations where they earn their place, and where we install them most often across Fort Lauderdale:

• Bathrooms that never get real airflow. A hopper window mounted high on a shower wall pulls steam out fast. In older Fort Lauderdale homes built before mechanical ventilation was standard, this is often the cheapest fix that actually works.
• Ground-floor windows that face a walkway or street. An awning window in Harbordale or Sailboat Bend gives you ventilation without handing passersby a clear view inside, since the glass tilts up and away from eye level.
• Laundry rooms and utility closets where wall space is tight. Both styles fit openings as narrow as 16 inches wide, which means you’re not reframing a wall to get air into a stuffy space.
• During and after rain, windows that stay closed out of habit. Because awnings open outward, they create a small canopy effect. Light rain stays out while air comes in. That’s not a replacement for impact-rated glass, but it changes how you use the room.
• Hurricane-season retrofits on small, oddly sized openings. We routinely replace old jalousie or crank-out windows in Las Olas Isles and Coral Ridge with modern impact-rated awning units that meet current code without changing the opening size.

How Awning and Hopper Windows Actually Differ

Both hinge on a horizontal axis. The difference is direction and weather behavior.

• Awning windows hinge at the top. The sash swings outward from the bottom, driven by a crank or a push bar. When they’re open, they deflect rain. When they’re closed, the sash presses against the frame, which makes them one of the tightest-sealing operable window designs available.
• Hopper windows hinge at the bottom. The sash tilts inward from the top. They’re common in basements and utility spaces, and they’re often paired with larger fixed windows to add ventilation without adding bulk.

In Fort Lauderdale’s climate, we spec awnings more often than hoppers for exterior-facing walls because of the rain-deflection advantage. Hoppers make more sense for interior utility spaces or anywhere the window is protected by an overhang or porch roof.

Our Awning & Hopper Windows Process

You’ll know the price before anything gets ordered. That’s the short version. The longer version looks like this:

1. Measure and assess. We measure the rough opening, check the existing frame for rot or termite damage, and confirm what’s behind the wall. Fort Lauderdale’s humidity punishes old wood frames, and assuming the frame is sound is how projects go sideways.
2. Written quote, locked. You get a dollar figure in writing covering the window, installation, flashing, and haul-away. Not an estimate that says “subject to change.” The number on the page is the number you pay unless you change the scope.
3. Product selection. We match the opening to the right product line: PGT for impact-rated builds, CWS for tighter budget ranges where impact isn’t required, CGI or ES Windows for coastal exposure in neighborhoods like Lauderdale Harbors or Nurmi Isles. The brand follows the need, not the other way around.
4. Installation day. You get a live arrival time through The Relay Standard, which our customers know as: book in a tap, live arrival time, before-and-after photos, written price, digital invoice. A background-checked, uniformed technician does the work. The old window comes out, the opening gets flashed and sealed, the new unit goes in, and the trim gets finished.
5. Done Right Promise, activated. Every awning and hopper installation carries our 365-Day Done Right Promise: if the work isn’t right, Juniper makes it right, for a full year, parts and labor, in writing. If a repair fails within that year, the second visit is free. No charge, no argument.

Awning & Hopper Windows Pricing in Fort Lauderdale

Awning and hopper windows are smaller than most casement units, so prices stay lower than you’d pay for a full-size bedroom window. But “lower” still covers a wide band depending on what the opening demands.

These are installed prices, not bare window costs. They include the unit, labor, flashing, sealant, and removal of the old window. If we find rotted framing or termite damage behind the old window, that’s a separate conversation with a separate line item before you approve anything. We don’t bury surprises in the final invoice.

Impact-rated units cost more for a reason. Laminated glass, built to resist wind-borne debris without shattering, carries a higher material cost than standard tempered glass. In Fort Lauderdale, where building code requires impact protection on most new and replacement openings, the impact-rated version is often not optional. We’ll tell you what code requires for your specific opening and what you can skip if your home predates the current requirements and you’re replacing like for like.

Every quote is free. Call (754) 354-1396 and we’ll schedule a measurement. You’ll have a written price in hand before you decide anything.

Why Fort Lauderdale Homes Need What Awnings Do Well

Fort Lauderdale averages about 60 inches of rain a year, most of it falling between June and October. That’s the reason awning windows got popular here in the first place. A double-hung window left open during a midday storm soaks the sill, the wall below it, and eventually the floor. An awning window open six inches lets air move and keeps most of the rain outside.

Hopper windows are a different story here. They’re more useful in coastal homes with elevated foundations or utility rooms, where the inward tilt makes sense for a window you’re reaching up to open. Tarpon River and Shady Banks have older homes with those half-height basement-style openings, and hoppers are often the only modern replacement that fits without reframing.

Salt air is another factor. Aluminum frames from PGT and CGI hold up better than wood against the corrosion Fort Lauderdale’s ocean humidity accelerates. When we install an awning window within a mile of the shoreline, we recommend aluminum or vinyl, not wood, and we explain the trade-off in U-factor and sightlines before you choose.

FAQ – Awning & Hopper Windows

How much do awning windows cost in Fort Lauderdale?

Awning windows in Fort Lauderdale typically run $380 to $950 per window installed, with vinyl non-impact units at the low end and impact-rated aluminum units from PGT or CGI at the high end. The price depends on the window’s size, the frame material, and whether impact-rated glass is required for your opening. Call (754) 354-1396 for a written, no-obligation quote: free to get, locked before you sign.

Can you replace a jalousie window with an awning window?

Yes, and we do it regularly in older Fort Lauderdale neighborhoods like Poinsettia Heights and Croissant Park. Jalousie windows, with their horizontal glass slats, have become a common replacement candidate because they seal poorly and rattle in high wind. An awning window fits the same wide, short opening profile and seals dramatically better. The difference in energy bills alone usually justifies the swap within a few years.

Are hopper windows good for bathrooms?

Hopper windows work well in bathrooms when mounted high on the wall, because they vent steam quickly and their inward tilt makes them easy to open even if the sill is above eye level. The main limitation is rain exposure: a hopper tilts into the room, so it won’t stay open during a storm the way an awning can. For shower walls and small utility bathrooms, we often recommend a hopper paired with an exhaust fan. Call (754) 354-1396 and we’ll price both options for your exact opening.

Do awning windows meet Florida hurricane code?

Impact-rated awning windows from PGT, CGI, and ES Windows meet Florida’s high-velocity hurricane zone requirements when properly installed with the specified anchoring system. Non-impact awning windows do not meet the current code for new or replacement openings in Fort Lauderdale. If you’re replacing an existing window that was code-compliant when installed, we’ll confirm what your specific property requires before we quote anything.

Serving Fort Lauderdale and Surrounding Areas

Juniper Windows Fort Lauderdale installs awning and hopper windows across Fort Lauderdale and the neighboring communities, including Victoria Park, Rio Vista, Colee Hammock, Harbordale, Sailboat Bend, Tarpon River, Shady Banks, Lauderdale Harbors, Nurmi Isles, Las Olas Isles, and Coral Ridge. Each location is independently owned and operated under The Relay Visibility Guarantee, so the experience is the same regardless of which part of the city you call home: live arrival time, photo updates, written price, digital invoice.

If you’re still deciding between an awning and a hopper, or between impact-rated and standard glass, the fastest way to get clarity is a five-minute conversation. We’ll ask about the room, the opening, and what’s been bothering you about the current window. Then we’ll recommend what we’d put in our own house, with a number attached.

Get Your Written Price

Ready to replace that jalousie, add ventilation to a stale bathroom, or close the gap on a window that hasn’t sealed right in years? Call (754) 354-1396 for a free measurement and a written quote from Juniper Windows Fort Lauderdale. A real person answers, 24/7. No voicemail maze, no callback queue, no phone tag. You’ll know the price before a single screw turns and it will be the same price when the job is done. That’s The Relay Standard and it’s been our standard since 2001.

Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Fort Lauderdale.