New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Bay & Bow Windows in Fort Lauderdale, FL
Bay and bow windows add square footage, natural light, and a panoramic view that flat windows simply can’t match. In Fort Lauderdale, where canal-front homes and Intracoastal properties make the most of every view corridor, a properly installed bay or bow window turns an ordinary room into the room everyone gravitates toward. At Juniper Windows Fort Lauderdale, we install bay and bow windows in homes from Victoria Park to Coral Ridge, and every project starts with a written price before a single screw turns. If you’re weighing whether a bay or bow window fits your home, call (754) 354-1396 and we’ll walk you through it. You can also see how this fits into our broader Window Installation in Fort Lauderdale services.
Here’s the short version: a bay window is a three-panel unit with a fixed center window flanked by two angled operable windows, typically at 30 or 45 degrees. A bow window uses four or more panels arranged in a gentle arc. Bay windows project further from the wall line, usually 12 to 24 inches, while bow windows create a softer curve. Both add usable interior space, often a window seat or garden window-style plant shelf, and both change the architectural feel of a room more than any other window style. In Fort Lauderdale’s hurricane-prone climate, the glass and frame choices you make on a bay or bow window matter more than they would in most of the country, and we’ll get into that below.
Key Takeaways
- Bay windows use 3 panels with angled sides; bow windows use 4+ panels in a gentle arc
- Both styles add 1 to 2 feet of interior floor space and significantly more natural light
- Impact-rated glass is strongly recommended for any bow or bay window in Fort Lauderdale
- Pricing for full bay or bow window replacement typically runs $2,800 to $7,500 per opening in Fort Lauderdale, depending on glass, size, and framing work
- Every Juniper bay or bow window job includes a written price before work starts and the 365-Day Done Right Promise, covering parts and labor for a full year
When You Need Bay & Bow Windows
Bay and bow windows aren’t for every room or every situation. But when they fit, nothing else does the same job. Here are the scenarios where Fort Lauderdale homeowners call us most often:
- You have a canal, Intracoastal, or lush tropical view that’s being wasted. A flat window frames a view. A bow window wraps around it. If you’re in Harbor Beach or Las Olas Isles watching boats go by through a 3-foot-wide window, a bow window changes how the whole room feels.
- Your front room feels dark and closed off. Bay and bow windows capture light from three to five angles instead of one. In Fort Lauderdale’s strong sun, that translates to a brighter room all day without adding more square footage to your roof line.
- You want a window seat, breakfast nook, or plant ledge without building an addition. The projection of a bay window creates a natural ledge. We’ve installed bay windows in Rio Vista bungalows and Plantation ranch homes alike where the homeowner wanted interior space but not a full remodel.
- Your existing bay or bow window is failing. In older Fort Lauderdale homes, we regularly see bay windows where the roof cap above the window has leaked for years, the seat board is soft, and the side windows won’t open. Once the structural framing starts to go, patching doesn’t fix it. The whole unit needs to come out and be rebuilt correctly.
- You’ve had water intrusion during heavy summer storms. Bay and bow windows are more vulnerable to leaks than flat windows because they have a roof above them, side angles that catch wind-driven rain, and a seat board below. If you see water stains on the ceiling below a bay window or damp drywall at the corners, the flashing and waterproofing details need attention.
- You’re planning a kitchen remodel and want to extend counter or seating space. A bay window over a kitchen sink, common in older Fort Lauderdale homes, creates a built-in herb garden ledge or a spot for bar seating. It’s one of the few window upgrades that changes how you use the kitchen.
If any of these match what you’re seeing, the next step is a conversation with someone who installs these units specifically. Call (754) 354-1396 and we’ll ask the right questions before recommending anything.
Our Bay & Bow Windows Process
Every window installation follows the same sequence, whether we’re replacing a failing unit in a 1960s Coral Ridge home or installing a new bow window in a 2000s Western Broward build. Here’s what to expect when Juniper Windows Fort Lauderdale handles the job:
- Site visit and measurements. A bay or bow window isn’t measured like a standard window. We check the rough opening, wall thickness, interior and exterior projection, roofline (if the unit has a cap), header above, and seat framing below. We also check for signs of existing water damage, rot, or termite activity that might affect the install.
- Written price and product recommendation. After measurements, we give you a written price that includes labor, materials, flashing, trim work, and any structural repairs the project needs. We keep the product conversation practical: glass type (impact-rated vs. standard), panel count, window operation style on the side panels (double-hung or casement), and finish color. No price changes at the door later.
- Permit confirmation and scheduling. Bay and bow windows in Fort Lauderdale typically require a permit because they change the exterior profile of the home and involve structural support. We handle the permit paperwork and coordinate with the local building department so you don’t have to.
- Demo and framing repair. We remove the existing window (or cut the rough opening in a new construction scenario), inspect the header and king studs, and make any structural repairs needed for the new unit’s weight and projection. Bay and bow units are heavy. If the original framing isn’t sufficient, we fix it now, not after the window is in.
- Installation, leveling, and weatherproofing. The new unit goes in level and square. We flash the top, bottom, and side angles with Fort Lauderdale’s wind-driven rain in mind, then seal and finish the exterior trim. If the unit has a roof cap, we install and seal it so water runs off, not in.
- Interior trim, cleanup, and final walkthrough. We trim the interior seat board and side jambs, seal any interior gaps, and clean up the work area. Before we leave, we open and close every operable panel in front of you, check the locks, and confirm the seal. You get before-and-after photos of the work as part of the Relay Standard.
The whole process usually takes one to two days for a standard bay or bow window replacement. If we uncover structural issues, we’re transparent about what that changes in cost and schedule before we proceed. We never want to be in the position of explaining a surprise invoice, and the process is built to prevent that.
Bay & Bow Windows Pricing in Fort Lauderdale
Here are honest numbers for Fort Lauderdale, not vague “call for pricing” ranges. Bay and bow windows cost more than standard replacement windows for good reasons: there are more panels, the seat board has to be built or rebuilt, and the structural load on the cantilevered section is real. Here’s what Juniper’s typical bay and bow window jobs fall into:
| Window Type | Typical Installed Price in Fort Lauderdale |
|---|---|
| Standard bay window, 3 panels, no impact glass | $2,800 – $4,200 per opening |
| Standard bow window, 4-5 panels, no impact glass | $3,500 – $5,800 per opening |
| Bay window with impact-rated glass (PGT or CGI) | $4,200 – $6,800 per opening |
| Bow window with impact-rated glass (PGT or CGI) | $5,000 – $7,500 per opening |
| Full tear-out with structural repair and roof-cap replacement | Add $800 – $2,500 depending on damage |
What changes these numbers: the width and height of the opening, whether you choose impact-rated glass (we recommend it in Fort Lauderdale, full stop), the panel configuration, the exterior finish (vinyl vs. aluminum-clad vs. wood), and the condition of the existing framing and seat board. A 6-foot-wide vinyl bow window with standard glass is on the low end of the range. A 10-foot impact-rated PGT bay window in a 1950s home with a rotted seat board is at the high end.
One pricing note for Fort Lauderdale specifically: if your bay window has an existing roof cap, we inspect it. Many older homes in this city have caps that were flashed incorrectly from day one, and simply replacing the window won’t fix the leak. We may recommend a full cap rebuild as part of the job. We’ll show you the cost in writing before you commit.
Every estimate is free. Call (754) 354-1396 and we’ll give you a written number on the first visit, not a “maybe” range.
Impact-Rated Glass for Bay & Bow Windows in Fort Lauderdale
Fort Lauderdale sits inside Miami-Dade and Broward County’s High Velocity Hurricane Zone (HVHZ). That means any window installed in a new build or a major renovation must meet impact-rated standards. For an older home being retrofitted, impact-rated glass isn’t always legally required, but it’s almost always the right call.
The reason is simple: a bay or bow window has more glass surface area and more exposed edges than a typical flat window. During a hurricane, wind-borne debris does not discriminate between your west-facing standard windows and your east-facing bay window. An impact-rated bay or bow window, built with laminated glass designed to resist shattering on impact, protects the entire room and prevents the internal pressure spike that blows roofs off homes.
That’s technical language. Here’s the plain version: impact-rated glass has an inner layer that holds the glass together when a branch or a roofing tile hits it. The glass may crack, but it won’t implode into your living room or let hurricane-force wind inside your house. For bay and bow windows in Fort Lauderdale, which catch more wind than recessed windows, this matters.
We install impact-rated bay and bow windows using product lines we trust in this climate, including PGT, CGI, and ES Windows. Each panel in a bay or bow unit has to be ordered and installed as an impact product from corner to corner; you can’t mix impact glass on the fronts and standard glass on the sides and expect the unit to perform.
Bay vs. Bow: Which One Fits Your Home?
This is the question that comes up on almost every first call. Both are projection windows with a panoramic effect, but the differences affect price, interior space, and how the outside of the home looks from the street.
A bay window is three panels: a large fixed center unit, usually a picture window, with a smaller casement window on either side angled at 30 or 45 degrees. The projection is sharp and geometric. Bay windows are a better fit on homes where you want maximum projection and a clean angular line that matches more traditional Florida architecture.
A bow window is four, five, or even six panels arranged in a smoother arc. The curve is softer, and the overall unit is typically wider than a bay window. Bow windows look especially good on homes with curved or sweeping façade features, and they can wrap around a corner of a room more gracefully than a bay window.
For interior space, both add the projection depth as usable ledge space, but a bay window with deeper angles creates a more pronounced window seat. A bow window with shallower angles creates a wider, more subtle ledge. The depth of the projection also affects the load on the cantilever: deeper projections need more structural support. We address this during the measurement phase, not during the install.
If you’re deciding between the two, the best place to start is the view itself. If the best view from the room is a single focal point, a bay window centers that view. If the view wraps, a bow window follows it. We’re happy to talk through both options over the phone or at your home. Call (754) 354-1396 and we’ll help you decide based on your specific house, not a general preference.
Signs Your Existing Bay or Bow Window Needs Replacement in Fort Lauderdale
Bay and bow windows fail differently than standard windows, and in Fort Lauderdale, we see the same failure patterns repeat across the city’s housing stock. If you notice any of these, the window likely needs more than a patch job:
- You feel drafts or humidity around the seat board or corners. The seat board under a bay window is a common air-leak point. Over time, the seal between the seat board and the wall framing fails, and warm, humid Fort Lauderdale air seeps into the house. You’ll notice it as a warm spot or a faint musty smell.
- The window sags or gaps appear between panels. Bay and bow windows are heavy, and the framing supporting them can weaken over time, particularly in older homes with wood framing exposed to decades of South Florida humidity. If gaps open between the mullions or the window pulls away from the interior wall, it’s structural, not cosmetic.
- Condensation forms between the glass panes. This is a failed seal on at least one panel. Seal failure means the insulating gas has escaped and the window’s insulation value is compromised. In a bay or bow window with multiple panels, you may see it in one panel first.
- Water stains appear on the ceiling or wall below the window. This is the most urgent sign. It means water has gotten through the roof cap or the flashing and is running down inside your wall or ceiling cavity. By the time the stain is visible, the leak has been going on for a while.
- Salt corrosion on aluminum frames near the coast. If you’re within a mile or two of the ocean, aluminum-clad bay and bow windows can develop corrosion along the lower rails and joints, which eventually compromises the frame integrity and the seal.
One thing we tell Fort Lauderdale homeowners repeatedly: if your bay or bow window needs a new seat board, new flashing, or replacement of more than one panel, the economics usually favor replacing the entire unit rather than repairing it piecemeal. We’ll be direct about that recommendation either way. Our goal is to give you the numbers and let you decide, not to sell you a full replacement when a repair would work. And if we do a repair and it fails within a year, we come back and fix it again at no charge.
FAQs – Bay & Bow Windows
How much does a bay window cost in Fort Lauderdale?
A standard 3-panel bay window in Fort Lauderdale typically costs between $2,800 and $4,200 installed without impact glass, and $4,200 to $6,800 with impact-rated glass. The final number depends on your rough opening size, panel configuration, frame material, and whether we need to address any structural issues in the existing framing. Call (754) 354-1396 for an exact quote, which is free and put in writing before you commit.
Is it cheaper to repair or replace a bay window?
If the failure is limited to a single operable panel, a lock, or a small seal issue, a repair is usually cheaper. If the seat board has rot, the roof cap is leaking, or more than one panel has seal failure, a full replacement typically costs less in the long run than repeated patch repairs. We give you both numbers when we inspect the window, then you decide.
Can you install a bay or bow window the same day?
For a standard replacement in an existing opening, a bay or bow window installation usually takes one day, sometimes two if structural work or a roof-cap rebuild is required. New construction installations that require cutting a rough opening take longer because of framing and permitting. We’ll give you a clear timeline at the written-quote stage, and we keep you updated with photos and live arrival times on the day of the install.
Do bay and bow windows require a permit in Fort Lauderdale?
Most bay and bow window installations in Fort Lauderdale require a permit because the unit projects beyond the exterior wall plane and involves structural support and waterproofing details. Juniper Windows Fort Lauderdale handles the permit application and coordination with the local building department as part of your project, and the cost is included in your written price.
Why is a bay or bow window more expensive than a regular window?
Bay and bow windows are more expensive because they contain three to five individual window units in one assembly, they require a structural support system under the projecting section, and they demand more detailed flashing and waterproofing work than a flat window. In Fort Lauderdale, the cost difference is also driven by the panel size and the need for impact-rated glass, which meets High Velocity Hurricane Zone building standards. Horizontal roller windows and other styles face similar requirements.
Why Fort Lauderdale Homeowners Choose Juniper Windows Fort Lauderdale for Bay & Bow Windows
Most window companies in Fort Lauderdale can order a bay or bow window from a manufacturer. The difference is in how the unit gets measured, ordered, installed, and backed up.
At Juniper Windows Fort Lauderdale, we’ve been installing windows and doors since 2001, originally under the Relay Home Co. family and now with a sharp focus on windows and doors specifically. Bay and bow windows are one of the more demanding installation types in the trade, and we’ve learned through two decades of installs where the failure points are: at the seat board, the roof cap, the flashing angles, and the connections between the mullions. We sweat these details on every job because the 365-Day Done Right Promise means we’re on the hook if we don’t.
Every Juniper bay or bow window project includes:
- A written price before any work starts. Not a verbal estimate. Not a “subject to change” sheet. A number in writing that covers labor, materials, and any structural work we’ve identified.
- The 365-Day Done Right Promise. If anything about the installation isn’t right within a full year, we make it right. Parts and labor, in writing, no gray area.
- Background-checked, uniformed technicians. You’ll know exactly who’s walking into your home, and you’ll get a live arrival time through the Relay Standard so you’re not sitting around waiting through a four-hour window.
- Access to eight product lines. We carry and install PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For bay and bow windows in Fort Lauderdale, we typically recommend PGT or CGI impact-rated products for their long track record in the South Florida coastal market, but we’ll show you options from other lines if they better fit your opening and budget.
- Real-person phone support, 24/7. If you call (754) 354-1396 at any time, a live person answers. No menu tree, no voicemail hoping for a callback.
We’re a windows-and-doors company, not a general contractor that happens to offer windows on the side. That focus shows up in the details: the quality of the flashing, the levelness of the seat board, the clean interior trim work, the way every operable window opens and locks smoothly before we call the job done.
If you’re in Fort Lauderdale and thinking about a bay or bow window, start with a conversation. Call (754) 354-1396 for a free estimate, or reach out through our home page to see more about how we work. We’ll answer your questions directly, give you real numbers, and help you decide whether a bay or bow window is worth it for your home and your budget.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Fort Lauderdale.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.