New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Davie, FL | Juniper Windows Fort Lauderdale
We’re Juniper Windows & Doors, and we provide Davie Window Installation and independent CGI service across Davie, from basic operator replacements to full-frame impact retrofits. The one thing that makes our CGI work here different: we’ve spent two decades adapting these systems to Davie’s pre-1992 ranch homes, where rough openings run out of square and concrete sills lack drainage slope. That’s the work most contractors won’t touch, and it’s the work we do every week. Call (754) 354-1396 for a free estimate.
Why Davie Residents Choose Us for CGI Service
Our Fort Lauderdale team includes field installers who cut their teeth on CGI’s legacy Miami-Dade impact lines, and we’ve been retrofitting Davie’s large-lot ranch homes with these systems since the early 2000s. We’re independent, so we focus on the glass and frame, not pushing one factory’s warranty. Sean Mackey, our owner, grew up in Los Angeles and learned construction fundamentals at Los Angeles Trade-Technical College before spending the better part of two decades learning exactly what Florida weather does to a poorly sealed frame. He’s the one who insists every CGI job in Davie gets a written price before any work starts, backed by our 365-Day Done Right Promise: if it isn’t right, we make it right, parts and labor, in writing, for a full year. That’s the standard. Call (754) 354-1396.
Common CGI Windows & Doors Problems We Solve in Davie
- Sentinel 630 casement operators that bind in humidity. Davie’s subtropical air pushes moisture into the gearbox lubricant until it gums up, leaving the sash stuck a few inches open. We see this most on west-running ranch elevations where afternoon sun bakes the frame, then thunderstorms roll in. We replace the operator with an OEM unit, not an aftermarket stem that bottoms out on these deep frames.
- Estate Collection hinged patio doors with shrinking bottom sweeps. Wind-driven rain from Davie’s frequent summer storms pools on the track when the sweep shrinks, and even stainless rollers grind against the corrosion. We replace the sweep and reset the hinges, or replace rollers with an OEM stainless kit when the track’s pitted enough to matter.
- CGI 8200 roller frames with buckled vinyl tracks. Pre-1992 Davie homes often had these installed with undersized headers. After a few years, the vinyl track bows under the weight of the laminated sash, and the sash jumps its guides. We re-shim the header to square, replace the track, and reset the sashes so they run true.
- Targa 900 single hungs that rattle at the meeting rail. Missing glide buttons cause that telltale rattle, and it’s worse in older Davie homes with non-standard shim packs where the frame shifts slightly under wind load. We stock the OEM glides locally, so it’s usually a same-visit fix.
- Vintage CGI single-pane sashes on 1970s and 1980s ranches. Many Davie homes still have the original single-pane aluminum CGI frames. When the flange is cupped beyond shimming, we recommend full-frame replacement. Otherwise, an insert retrofit preserves the ranch trim and the code-compliant header, and it’s the more affordable path.
CGI Service in Davie: What Local Conditions Mean for Your Equipment
Here’s the thing most people don’t know until they own a Davie home built before 1992: the concrete sills were often poured flat, with no drainage slope to the exterior. That means water sits against the bottom flange of a CGI frame every time it rains, and over the years it works its way into the rough opening. In western Davie’s rural enclaves, where large-lot ranch homes still dot the tree-lined streets off Flamingo Road, our crews regularly re-pitch sills and hacksaw-chase the rough opening ahead of impact-frame installation. Without that step, even a brand-new CGI impact window gets installed with a hidden moisture path behind it. That’s not a guess; it’s what we’ve measured on dozens of homes between Flamingo Road and the town’s western edge. This is why Davie isn’t the same job as a coastal condo in Fort Lauderdale. The codes are the same on paper, but the existing concrete work is a completely different conversation.
CGI Models & Products We Service in Davie
We service the CGI lines most common in Davie: Sentinel 630 Series impact casement and awning units, Estate Collection hinged patio doors, Targa 900 Series single-hung impact windows, and the 8200 Series horizontal rollers. We keep a Davie-boxed inventory of OEM glides, operator gearboxes, and stainless roller kits, because aftermarket parts often don’t seat properly on these deep frames. When a full replacement is the call, we install hurricane impact windows, French and double doors, and full frame replacements, all with written pricing before work starts. If you’re looking for broader CGI sales & service, we can point you the right direction, and we handle everything in-house from measurement to final inspection.
CGI Service Pricing in Davie
Here’s what CGI service typically runs in Davie. A single operator gearbox replacement on a Sentinel 630 runs $185 to $310. Replacing a buckled 8200 track with re-shimming lands between $340 and $520 per opening. A full-frame retrofit on a single CGI impact window runs $900 to $1,600, and an Estate Collection patio door with new laminated glass typically falls between $2,500 and $4,500, depending on the rough opening work. Every job gets a written line-item quote before anything starts, and the 365-Day Done Right Promise covers parts and labor for a full year. If you want an exact number for your house, call (754) 354-1396; estimates are free, and we’ll come out to Davie to measure.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Davie
The gearbox lubricant absorbs moisture from Davie’s subtropical air, thickens, and binds the operator, leaving the sash stuck a few inches open. The fix is an OEM operator replacement, and it’s a quick job. Call (754) 354-1396 and we’ll schedule a Davie visit.
Yes, and we do it regularly. The key step most crews skip is re-pitching the flat sill and chasing the rough opening so the new impact frame drains properly. We handle that on every pre-1992 Davie ranch we retrofit with Davie Window Replacement. Call (754) 354-1396 for a free measurement and quote.
The bottom sweep shrinks over time, letting wind-driven rain pool on the track, and the rollers corrode. If the track’s still intact, we replace the sweep and rollers. If the track is pitted or bowed, replacement is the better call.
No. Aftermarket glides often don’t seat properly on the Targa’s deep frames, and they’ll pop out under the wind loads Davie gets during hurricane season. We use OEM glides, which fit the meeting rail correctly and stop the rattle. Call (754) 354-1396 for a fixed-price repair.
It’s usually both. On pre-1992 Davie homes, undersized headers let the rough opening shift, which bows the vinyl track. We re-shim the header to square, replace the track with an OEM stainless kit, and reset the sashes. Call (754) 354-1396 and we’ll diagnose it on site.
Service Areas Near Davie
We serve Davie and the surrounding area, including Davie service area neighborhoods, Fort Lauderdale, Oakland Park, Tamarac, and Hallandale Beach. For homeowners just east of Davie, we also offer CGI service in Fort Lauderdale, and for those up the coast, CGI service in Oakland Park covers the same product lines with the same written-price standard.
Book Your CGI Service in Davie Today
If your CGI windows or doors need work in Davie, call (754) 354-1396. We’ll give you a written price before anything starts, and a live arrival time so you’re not stuck waiting around. Same-day service is often available for urgent repairs.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Davie since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.