New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Fort Lauderdale, FL | Juniper Windows Fort Lauderdale
CGI windows and doors service in Fort Lauderdale typically runs $180 to $340 for common repairs like roller swaps or seal replacement, and our independent team handles everything from fogged impact glass to corroded frames. We’re not a manufacturer affiliate, we’re a local Fort Lauderdale crew that has spent years learning exactly what salt air and hurricane codes do to CGI products. Call (754) 354-1396 for a free estimate with a written price before any work starts.
Our CGI sales & service work spans the full range: Estate Collection, Sentinel Series, Targa Series, and Classic CL Series. We diagnose, repair, and replace with genuine CGI components where Miami-Dade compliance depends on exact profile tolerances, and marine-grade aftermarket hardware where it doesn’t. For homeowners across Fort Lauderdale service area neighborhoods, that means faster turnaround and honest repair-versus-replace guidance.
Why Fort Lauderdale Residents Choose Us for CGI Service
Most window companies in Fort Lauderdale will swap out a whole unit before they’ve even looked at the failure. That’s not how we work. Sean Mackey, our owner, grew up in Los Angeles and picked up construction fundamentals at Los Angeles Trade-Technical College before spending nearly two decades learning what Florida humidity does to a poorly sealed frame. He’ll tell you the difference between a $60 roller replacement and a $1,400 sash rebuild, because he figures you deserve to know before you spend.
Our crew has worked CGI windows in Fort Lauderdale long enough to recognize failure patterns before we touch the frame. White corrosion blooms at sill weep holes on units near the Intracoastal? That’s salt-air pitting, and it needs a different fix than the same symptom on an inland home. Fogged laminated glass on a south-facing elevation? That’s desiccant saturation from failed butyl seals, and replacing just the glass is usually the right call. We diagnose first, then quote. Every job gets a written price before a screw turns, and the 365-Day Done Right Promise covers parts and labor in writing.
Common CGI Windows & Doors Problems We Solve in Fort Lauderdale
- Aluminum frame pitting and white corrosion blooms at sill weep holes. CGI single-hung units installed within 500 yards of the Intracoastal Waterway develop this in as little as seven years. The salt-laden air eats the aluminum at the weep holes until the sash won’t seal. We mill out the corroded sections and rebuild with genuine CGI compression seals, or tell you straight if the extrusion wall thickness is compromised and replacement makes more sense.
- Fogging and desiccant saturation in older impact laminated glass. South-facing elevations in Fort Lauderdale get brutal sun load, and after enough thermal cycling the butyl seals on CGI impact glass fail. Moisture gets in, the desiccant saturates, and you’re left with a cloudy window that won’t pass inspection. We replace the laminated pane with genuine CGI glass and re-bed the frame properly.
- Stiff or skewed operation in CGI three-panel sliders. Waterfront condo owners know this one. Salt-and-sand grit binds the bottom track, roller wear makes the panel drag, and soon the whole thing skews. We clean the track, replace rollers with stainless-cased aftermarket units, and realign the panel so it glides like it should.
- Stress fractures radiating from wind-borne debris impact. We see CGI picture windows with micro-crazing that didn’t shatter but absorbed a hit. The glass looks intact, but the laminate is compromised and won’t perform in the next storm. We assess the damage and replace the pane before hurricane season puts it to the test.
- Failed balance tubes in single-hung and double-hung units. Nylon balance tubes degrade faster in Fort Lauderdale’s heat and humidity than they do up north. The sash won’t stay up or drops hard. We replace them with stainless-cased aftermarket units that handle the climate better than the originals.
CGI Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Here’s the thing about Fort Lauderdale that doesn’t apply in Davie or Oakland Park: the city’s high-rise condominiums and waterfront homes don’t just face hurricane wind loads, they face a salt-air environment that never lets up. A CGI window in Sailboat Bend or Coral Ridge isn’t just getting hit by storms, it’s getting slowly eaten by the Atlantic every single day. Miami-Dade County hurricane codes set the minimum standard, and CGI’s impact-rated lines meet them, but aluminum frames within half a mile of the Intracoastal will start showing corrosion at the weep holes long before the glass gives out.
We recently rebuilt a pair of CGI Estate Series single-hung windows in Coral Ridge where salt pitting had done exactly that. The homeowner couldn’t lock the right sash without a pry bar. We milled out the corroded sections, swapped in genuine CGI compression seals, replaced the nylon balance tubes with stainless-cased units, and re-bedded the frame with polyurethane caulk. Now both sashes lock with one hand. That’s the kind of repair that takes real CGI-specific knowledge, not a general window tech with a caulk gun.
And in Sailboat Bend, the challenge is different. Dozens of original 1950s jalousie windows still exist there, and they violate current Miami-Dade wind-missile standards outright. Those narrow masonry openings won’t take a standard impact window without altering the mid-century elevation, which historic district guidelines frown on. CGI impact casements are one of the few options that fit properly. We’ve done several of those retrofits, and the fit matters more than most people realize.
CGI Models & Products We Service in Fort Lauderdale
We work on all four CGI model families: Estate Collection, Sentinel Series, Targa Series, and Classic CL Series. That covers single-hung, double-hung, casement, horizontal roller, picture windows, and sliding doors. For structural components like laminated impact panes and extruded rail systems, we use genuine CGI parts, because Miami-Dade compliance depends on exact profile tolerances. For replaceable items like rollers, balances, and weatherstripping, we lean on marine-grade aftermarket hardware that holds up better in salt air than the originals.
We stock the common wear parts locally so Fort Lauderdale turnaround is measured in days, not weeks. If you need a Fort Lauderdale Window Replacement before the next named storm, call (754) 354-1396 and we’ll tell you honestly whether it’s a repair or a replacement, and what each costs.
CGI Service Pricing in Fort Lauderdale
| Service | Typical Price Range |
|---|---|
| Roller replacement on CGI sliding door | $120 – $220 |
| Balance tube replacement (per sash) | $140 – $260 |
| Weatherstripping and seal replacement | $180 – $340 |
| Impact glass replacement (laminated pane) | $600 – $1,400 |
| Full frame rebuild or replacement | $900 – $2,500+ |
What drives the cost: the model, the age of the frame, how far the corrosion has spread, and whether we’re working on a ground-floor single-family home or a second-floor condo with no balcony access. Our free estimate includes a written line-item quote before any work starts. No vague numbers, no surprises at the door. Call (754) 354-1396 to schedule yours.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Fort Lauderdale
No. Even a small crack compromises the laminated interlayer, and Miami-Dade code requires intact impact-rated glazing to pass inspection. We replace the pane with genuine CGI laminated glass and re-bed the frame so it’s compliant again. Call (754) 354-1396 for an exact quote, estimates are free.
That’s aluminum corrosion from salt air, and it’s common on CGI units installed within a few hundred yards of the Intracoastal Waterway or the ocean. The salt reacts with the aluminum at the weep holes and creates white blooms. If caught early, we can clean and seal the affected areas. If the extrusion wall is thinning, replacement is the honest call. We’ll tell you which one applies to your frame.
Usually not. Stiff CGI sliders in waterfront condos are typically a roller and track issue, and we can service those from the interior without needing balcony access. If the frame itself is corroded beyond repair, we’ll tell you straight and explain your Fort Lauderdale Window Installation options, including models that meet Miami-Dade code. Call (754) 354-1396 to schedule an assessment.
Yes, we can replace just the glass in most CGI Estate windows as long as the frame and sash are structurally sound. The laminated impact pane is ordered to the exact size and profile, then installed with new compression seals. If the sash itself is corroded or the desiccant has saturated the frame, a full sash replacement may be the better long-term fix. We’ll show you the cost difference before you decide.
Salt air accelerates wear on rollers, balances, and weatherstripping, especially on units within half a mile of the water. The best pre-hurricane-season move is an inspection: we check seals, hardware, and glass condition, then fix anything that could fail under wind load. A $140 balance replacement now beats a $1,400 glass replacement after the storm. Call (754) 354-1396 to book an inspection before the next named storm heads this way.
Service Areas Near Fort Lauderdale
We regularly serve CGI service in Davie for inland homes with different corrosion patterns, and CGI service in Oakland Park for mid-century single-family stock. We also cover Tamarac, Coconut Creek, and Hallandale Beach. If your address is anywhere in the Fort Lauderdale metro, call us and we’ll tell you if we can help.
Book Your CGI Service in Fort Lauderdale Today
If your CGI windows or doors need work, call (754) 354-1396. We answer with a live person, 24/7. You’ll get a written price before any work starts, and the 365-Day Done Right Promise covers every job. If I wouldn’t put it on my own house, I’m not recommending it for yours.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Fort Lauderdale since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.