Impact Window Installation Cost - Written Price Before Anything Is Ordered

How Much Does Impact Window Installation Cost in Fort Lauderdale?

Impact window installation in Fort Lauderdale typically runs between $850 and $1,400 per window for standard-sized openings, with most whole-home projects landing between $9,000 and $24,000 depending on home size, window count, and product line. A single bedroom window with a basic PGT aluminum frame starts around $700, while a large custom picture window with high-end laminated glass can push past $2,500. These are real 2026 ranges pulled from what we see on Fort Lauderdale job sites from Rio Vista to Coral Ridge, not national averages pulled off a spreadsheet.

You should also know that impact windows are not a single product. The price shifts based on frame material, glass package, size, and whether the opening needs a full-frame replacement or can use a retrofit installation. We’ll break all of that down below with numbers attached to every line item, so you know what to expect before anyone steps foot in your house.

Key Takeaways: Impact Window Pricing in Fort Lauderdale

• Per-window cost: $850 to $1,400 installed for standard sizes; $700 to $2,500+ full range.
• Whole-home projects: $9,000 to $24,000 for a typical 10 to 16 window single-family home.
• Frame material matters: Aluminum runs lower, vinyl sits in the middle, and premium aluminum with thermally broken frames costs more.
• Labor is 30 to 40% of the total: The rest is the window, fasteners, sealants, and debris removal.
• Permits and HOA approvals add time and cost: Fort Lauderdale requires a permit for impact window installation, and many condo and homeowner associations require specific product approvals.
• Juniper Windows Fort Lauderdale gives you a written price before work starts. No estimate that changes at the door. That is the whole point of how we operate.

Impact Window Installation Cost Breakdown (2026)

Here is the line-item breakdown we use on Fort Lauderdale estimates. These numbers reflect what homeowners in neighborhoods like Victoria Park, Imperial Point, and Sailboat Bend actually paid on 2026 projects, not national marketing fluff.

Those are honest numbers. When a Fort Lauderdale contractor quotes a number far outside those ranges, ask why. Sometimes there is a legitimate reason: a third-story window with no safe ladder access, a home with structural settling requiring frame repair, or a condo building with demanding architectural standards. Other times, there is not a legitimate reason. The way to protect yourself is simple: get a written price before work begins and hold the contractor to it. That is the standard we operate under on every single project.

Aluminum vs. Vinyl Frames: The Real Price Difference

In Fort Lauderdale, aluminum frames dominate because they hold up to salt air and humidity better than wood and offer thinner sightlines, which means more glass and a cleaner look. Expect to pay $850 to $1,300 per window for aluminum. Vinyl impact windows cost a bit less, usually $700 to $1,100 per window, and they deliver better thermal performance for the money, though the frames are bulkier and some HOAs in neighborhoods like Las Olas Isles will not approve them for aesthetic reasons. Thermally broken aluminum, which solves the heat-transfer problem that standard aluminum has, adds $150 to $350 per window.

What Product Lines Cost What

We carry eight product lines, which means the window that fits your house and budget is not a compromise. Here is how the pricing stacks up in the Fort Lauderdale market:

• PGT WinGuard: $850 to $1,400 per window installed. The workhorse of Florida impact protection. Aluminum and vinyl options, huge size range, strong availability. If you want a straightforward, proven window, this is where most of our Fort Lauderdale projects land.
• CGI: $1,100 to $2,000 per window installed. Heavy-duty commercial-grade frames. Popular in high-rise condos along the Galt Ocean Mile and Harbor Beach where wind-load requirements are stiff.
• ES Windows: $1,200 to $2,400 per window installed. Premium aluminum with the thinnest sightlines in the industry. You pay for the look. Homeowners upgrading mid-century moderns in Poinsettia Heights tend to spec these.
• ECO Window Systems: $800 to $1,500 per window installed. Aluminum frames with a focus on energy efficiency, good mid-market choice.
• Mr-Glass: $700 to $1,100 per window installed. Entry-level impact protection, often used on investment properties and rental units.
• CWS: $900 to $1,500 per window installed. Wide product range, strong warranty, good for whole-home packages.
• Therma-Tru: $1,000 to $1,800 for impact-rated entry doors, not windows. We include them here because door replacement often happens alongside window work.
• ViewLux: $950 to $1,600 per window installed. Vinyl frames with strong energy ratings, a good fit for homeowners who want impact protection without the aluminum price tag.

We are not going to tell you one brand is “the best.” The right window is the one that meets your wind-load requirements, your HOA’s approval list, and your budget. You can see all eight lines at our Impact Window Installation in Fort Lauderdale page, where we walk through how each performs against Florida building code.

What Affects Impact Window Installation Pricing in Fort Lauderdale

You cannot price a window project accurately from a photo or a floor plan. Too many local factors move the number. Here are the six that matter most in Fort Lauderdale specifically.

• Window count and size. A 3-bedroom ranch in Riverland with 10 windows is a straightforward day or two of work. A 4,000-square-foot estate in Nurmi Isles with 35 openings, custom arches, and transom windows is a week-long project with a very different number. Larger openings need thicker glass, which gets expensive quickly.
• Existing frame condition. Older homes in Sailboat Bend and Riverside Park, many built before 1980, often have rotted wood frames, termite damage, or out-of-square openings. Full-frame replacement adds $150 to $400 per window. Retrofit only works when the existing frame is solid and square.
• Floor and access. Second-story and third-story windows on Galt Ocean Mile condos require lifts, scaffolding, or extra safety equipment. Add $100 to $250 per window for elevated work. If your home is a single-story concrete block build in Middle River Terrace, labor stays on the lower end.
• Glass package and energy ratings. Standard laminated impact glass is included in the prices above. Adding low-E coatings to cut heat gain and meet Florida energy code for certain exposures runs $80 to $150 extra per window. Going from single-pane to double-pane laminated adds $200 to $400.
• Permit requirements and HOA approvals. The City of Fort Lauderdale requires a building permit for impact window installation. The fee is usually $150 to $500 depending on project scope. HOAs add their own layer: some require specific product approvals, specific color ways, and even specific installers. We have handled HOA submittals for buildings all over Fort Lauderdale, so the paperwork does not stall your project.
• Timing and seasonality. Hurricane season, June through November, is the busiest window for impact installation in South Florida. Contractors that are not booking out do not exist in August. Booking in December through April typically gives you more scheduling flexibility, though prices do not swing much month to month. The cost of impact windows is driven by materials and labor, not seasonal demand pricing.

How to Save on Impact Window Installation in Fort Lauderdale

You do not need to pay top-of-market prices to get real hurricane protection. Here is what actually moves the number down, based on what we tell clients across Fort Lauderdale every week.

Replace windows in phases, not piecemeal. Mobilization costs, permit fees, and debris disposal get spread across a larger job. Replacing 12 windows in one project costs less per window than replacing 3 windows, then 3 more, then 3 more. If the full project is not in the budget this year, do the elevation that faces the storm path first, then phase the rest. Just do not let a contractor price a phase as if it were a separate full project.

Choose standard sizes when possible. Custom-sized windows cost more because the manufacturer has to retool. If an opening can accommodate a standard 36-inch or 48-inch unit, going standard saves $100 to $200 per window. We will tell you when a custom size is worth the money and when it is not.

Compare glass packages, not just brands. Two windows from different manufacturers can have the same glass laminated by the same supplier. You might pay a premium for a brand name when an equivalent product from CWS or ECO Window Systems meets the same wind-load requirements for less. We carry eight lines specifically so you have that optionality.

Get a written price, then compare it properly. A quote that is $2,000 lower is not a deal if it excludes permits, leaves out flashing, or assumes your existing frames are fine without looking at them first. Get three written prices, make sure each includes the same scope, then compare. Or call us at (754) 354-1396 for a free estimate that includes everything up front. No surprise line items. No estimate that morphs at the door.

Why Impact Windows Cost More Than Standard Windows (And Why They Are Worth It)

An impact window is not a standard window with thicker glass. The entire assembly is different. The glass is laminated, meaning two panes are bonded with a plastic interlayer, the same principle as a car windshield. The frame is reinforced at stress points. The fasteners are engineered to specific pull-out resistance. When a 2×4 hits an impact window at 34 miles per hour, the glass cracks but stays in the frame. That is the entire job: keep the envelope sealed so wind pressure cannot enter the house and lift the roof off.

That engineering is why impact windows run 60 to 100% more than standard windows of the same size. A standard vinyl window might cost $400 installed. The impact-rated version from the same manufacturer runs $800 to $1,000. You are paying for the laminated glass and the testing that proves it works.

In Fort Lauderdale, the value proposition is straightforward. You are replacing glass that will one day be hit by storm debris, whether this hurricane season or ten seasons from now. Impact windows also cut outside noise dramatically, which matters if you live within earshot of Federal Highway, Broward Boulevard, or the Brightline tracks. And most insurance carriers in Broward County offer meaningful premium discounts for homes with impact-rated openings. The discount does not pay for the windows on its own, but over five years it recovers a chunk of the cost.

Permits and Code Requirements in Fort Lauderdale

Impact window installation in Fort Lauderdale requires a building permit. The wind-load requirements are set by the Florida Building Code, specifically the High Velocity Hurricane Zone provisions that apply to Broward County. Your windows need to meet a specific design pressure rating, which is a measure of how much wind force the window can take before failing. For most single-family homes in Fort Lauderdale, that rating is between 50 and 60 pounds per square foot. High-rise units along the beach can require ratings of 70 psf or higher.

We handle the permit application, product approval documentation, and inspections as part of every project. The permit cost is included in the table above. If you are working with a contractor who tells you a permit is not needed, walk away. Unpermitted window work creates a mess when you sell the house and can leave you exposed with your insurance carrier.

Signs Your Fort Lauderdale Home Needs Impact Windows

You might be on this page because a window is already failing, not because you are planning ahead. Here is what we see in Fort Lauderdale homes that indicate it is time to replace, impact-rated or not.

• Condensation between the panes. The seal has failed. The window is no longer insulated properly, and no repair brings it back.
• Visible frame rot or separation. Wood and aluminum both fail in Fort Lauderdale humidity. If the frame is pulling away from the wall or showing white oxidation, water is getting in.
• Windows that stick, jam, or refuse to lock. A window that cannot lock is a security hole and a hurricane vulnerability.
• Rooms that never cool down. Older single-pane windows leak heat. U-factor, which measures heat transfer, is the number to look at. Lower is better. Florida energy code requires 0.75 or lower; premium impact windows from ES Windows and ViewLux get down to 0.30.
• You can feel air movement around closed windows. The weatherstripping has gone. That is comfort and money leaking out.

If you are seeing these issues and you already know you want impact protection, the math changes: you are not comparing impact windows to doing nothing. You are comparing impact windows to standard replacement windows that will not protect your home and will not earn the insurance discount. The incremental cost of going impact-rated is often $300 to $500 per window, and in Fort Lauderdale, that is money well spent.

How Juniper Windows Fort Lauderdale Prices Projects

Our process is different on purpose. When you call (754) 354-1396, a live person answers. You will not sit through an automated phone tree. We schedule a consultation, one of our background-checked, uniformed technicians comes to your home, takes measurements, checks the existing frames, and walks you through the product options. Then you get a written price. Not an estimate that ranges $9,000 to $14,000 depending on “what we find.” A number. In writing. Before any work starts.

That written price is backed by the 365-Day Done Right Promise: if the work is not right, we make it right. Parts and labor, for a full year, in writing. No charge for a second visit if something fails. No argument. Fort Lauderdale homeowners have enough to worry about during hurricane season. Their window contractor should not be one of those worries.

We also run every job through the Relay Standard: book through our home page, get a live arrival time you can track, before-and-after photos of the work, and a digital invoice you can pay from a link. That is the level of visibility we think every homeowner deserves, and it is the reason our Fort Lauderdale clients keep recommending us to their neighbors in Coral Ridge, Tarpon River, and Holiday Park.

FAQs – Impact Window Installation Cost in Fort Lauderdale

How much does impact window installation cost per window in Fort Lauderdale?

Expect to pay $850 to $1,400 per window installed for standard-sized impact windows in Fort Lauderdale, with entry-level options starting around $700 and large custom windows exceeding $2,500. The per-window price includes the window, installation labor, fasteners, sealant, and interior trim work. For an exact price on your specific openings, call (754) 354-1396 for a free estimate. We give you a written number before any work starts.

Is it cheaper to repair or replace impact windows?

Repairing a single component, like replacing damaged weatherstripping or a broken latch, costs $75 to $250 and is almost always cheaper than replacement. But if the glass itself is cracked or the frame is compromised, repairing an impact window means replacing the sash, which runs $400 to $800 per sash, at which point replacement may cost only slightly more and gives you a new warranty. We will tell you honestly which path makes sense. Call (754) 354-1396 and describe what you are seeing.

How long does impact window installation take in Fort Lauderdale?

Most single-family home projects in Fort Lauderdale take 1 to 3 days for 10 to 16 windows, assuming standard sizes and no structural surprises. Large custom projects or whole-home door-and-window packages can run a week. We give you a live arrival time and photo updates throughout the job, so you know exactly where things stand.

Do impact windows really lower insurance premiums in Fort Lauderdale?

Yes. Most insurance carriers in Broward County offer wind-mitigation credits for homes with impact-rated windows, and the savings often run $800 to $2,500 per year depending on your policy and home value. You will need a wind mitigation inspection after the install, which costs $75 to $150, and then your agent processes the credit. The savings do not fully offset the cost of the windows, but over five to seven years they recover a meaningful portion of it.

Do I need a permit for impact windows in Fort Lauderdale?

Yes. The City of Fort Lauderdale requires a permit for impact window installation, and the permit fee typically runs $150 to $500 depending on the project scope. Juniper Windows Fort Lauderdale handles the permit application and scheduling as part of every project. Any contractor who suggests skipping the permit is not doing you a favor.

Can you install impact windows the same day?

Same-day installation is available when windows are in local stock and the permit is already secured, which happens for some standard-size PGT and Mr-Glass units. In most cases, custom sizes and premium lines take 7 to 21 days from order to install. We stock common sizes from eight product lines, so we can often move faster than manufacturers’ standard lead times. Call (754) 354-1396 and we will tell you the realistic timeline for your specific windows.

Get a Written Price for Your Fort Lauderdale Impact Window Project

You now know what impact windows cost in Fort Lauderdale in 2026: $850 to $1,400 per window, $9,000 to $24,000 for most whole-home projects, with the variables that push the number up or down. What you do not know is what your specific home will cost. That takes a measurement, a look at your existing frames, and an honest conversation about your budget and priorities.

Call (754) 354-1396 today. A live person will answer, schedule your free estimate, and a Juniper Windows Fort Lauderdale technician will come to your home with eight product lines in the catalog and a commitment to give you a written price before any work starts. No vague estimates. No surprise invoices. No four-hour arrival windows. Just a clear number and a plan.

Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Fort Lauderdale and surrounding Broward County communities since 2001.

Pricing reflects the Fort Lauderdale market as of 2026. Juniper Windows Fort Lauderdale offers free estimates – call (754) 354-1396.