New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Dania Beach
Door replacement in Dania Beach typically runs $900 – $3,400 for a standard exterior door, and $1,800 – $6,500 when the project involves impact-rated glass and reframing to meet HVHZ code. We’re Juniper Windows Fort Lauderdale, and our crews work in Dania Beach every week, from the mid-century blocks off Stirling Road to the condos along East Dania Beach Boulevard. If your door sticks, leaks, or carries a Miami-Dade NOA sticker older than your car, call us at (754) 354-1396. We’ll send a real person, not a call center.

You don’t need a twenty-minute phone call to get a ballpark. The numbers above are real ranges for this market. What moves them: whether the door is interior or exterior, whether you need impact-rated glazing, and what we find when we pull the old unit. More on that below.
Why Juniper Windows Fort Lauderdale Is Dania Beach’s Preferred Door Replacement Company
Dania Beach homes have a specific problem set. Salt air eats aluminum frames. Humidity rots the bottom plate behind sliding glass doors. Older concrete block homes often have jambs that were sized for single-pane aluminum, not a 200-pound PGT impact door that has to anchor into block under high-wind load. We know this because we’ve pulled enough of them apart. Our crews work the same streets every month, from the canals up to the 33004 ZIP.
Every door replacement job gets a written price before a single screw turns. Sean Mackey runs our operation, and the standard he set is simple: if the number moves, you don’t pay a cent more until you’ve signed a change order that explains exactly what we found and what it costs. No vague “we’ll see once we open it up” at the door. You see the same written scope we do.
We answer our phone 24/7 with a live person, because a door that won’t close at 2 a.m. is a security problem, not a scheduling annoyance. When you book with us, you get a live arrival time you can track, before-and-after photos of the work, and a digital invoice you can pay from a link. That’s the Relay Standard, and it applies to every job in Dania Beach.
Our Door Replacement team carries eight product lines, including PGT, CGI, and CWS, so the right door for your opening is never a compromise. And every installation is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right, parts and labor, in writing, for a full year.
Interior Door Installation in Dania Beach
Interior Door Installation in Dania Beach often means replacing hollow-core original slabs in mid-century homes with solid-core doors that actually block sound and close square. We’re asked for this a lot in older condo buildings where the original doors have warped from decades of humid air and the hinges have given up. A standard interior door swap here runs $350 – $800 per opening, including the slab, hardware, and labor. If we’re matching an existing stain or adding pre-hung units, budget $600 – $1,200 per door.
Solid-Core Upgrades
For condos and houses where noise between rooms is the complaint, we recommend solid-core slabs. They’re heavier, they close with a thud instead of a rattle, and they don’t telegraph every conversation through the hallway. We order them pre-finished or unfinished, depending on whether your trim is original Florida cypress or painted MDF.
Pre-Hung Units in Older Openings
When a jamb is rotted or out of square, which happens often in Dania Beach’s humid concrete-block homes, we don’t try to shim a slab into a bad opening. We pull the old jamb and set a pre-hung unit. It costs more up front, but the door actually works for the next twenty years.
Door Installers in Dania Beach
Door Installers in Dania Beach have to understand one thing most installers in suburban cities never deal with: HVHZ anchoring. When we install an exterior door here, it’s not a trim-and-caulk job. It’s anchoring into concrete block or reinforced jamb studs, flashing it against wind-driven rain, and sealing it so the salt air doesn’t start its slow work on day one. Our installers are background-checked, uniformed employees, not subcontractors we’ve never met. You know who’s walking through your door, literally.
Exterior Door Anchoring
An exterior door that isn’t anchored properly is a liability in a storm. The HVHZ code requires specific fastener spacing and jamb dimensions for impact-rated doors. We check the existing opening before we order anything, so the door we bring actually fits the anchoring spec, not just the rough opening width.
Sliding Glass Door Replacement
Old jalousie sliders and single-pane aluminum sliders are the most common exterior door failure in this city. The track corrodes, the rollers die, and the glass was never impact-rated in the first place. A replacement impact slider runs $2,200 – $5,500 here depending on panel width and glass package. We measure, order, and install it to code.

Trusted Brands We Service in Dania Beach
We stock parts and glass packages for the brands that make sense in a coastal market. PGT impact doors are our default for exterior openings in Dania Beach because they carry current Miami-Dade NOA approvals and hold up against salt exposure. CGI makes a heavy-wind-rated line we specify on canal-front and beachfront exposures. CWS offers a solid mid-range impact package. For interior work, we pull from ES Windows and Therma-Tru when the job calls for it. That local stock means we don’t wait two weeks on a glass package when your existing door is already failed.
On a 1960s concrete-block home near Frost Park, our crew pulled a rusted sliding glass door and found the original jamb too undersized for the new PGT impact-rated door. We reframed the opening, wrote the added lumber and labor into a signed change order before cutting, then installed the door with a new Florida Product Approval sticker and a continuous seal that stopped the water intrusion the homeowner had seen for years. That’s the process every single time: inspect, document, price in writing, then cut.
Common Door Replacement Problems We See in Dania Beach Homes
- Rusted aluminum frames and corroded rollers. Decades of salt-laden air settles into the track and frame joints of original sliding doors. By the time we’re called, the door often won’t roll at all, and the frame itself is structurally done.
- Rotted bottom plates behind sliding glass doors. Dania Beach’s humidity and heavy summer downpours push water into small flashing failures. The rot hides behind the trim and only appears after the old door comes out.
- Failed Miami-Dade NOA stickers on original windows and doors. Many older Dania Beach homes still carry their original product approval stickers, but the seals and hardware are decades past their service life. The sticker doesn’t mean the door still protects you.
- Undersized jambs on original openings. A jamb sized for a thin single-pane aluminum slab usually can’t anchor a modern impact-rated door. We see this constantly in 1950s and 1960s concrete-block homes across the city.
Pricing for Door Replacement in Dania Beach, FL
Here’s what Dania Beach homeowners should expect. An interior slab swap: $350 – $1,200 per opening. A standard exterior door without impact glass: $900 – $1,800. An impact-rated exterior door with current NOA approval, properly anchored and flashed: $2,000 – $4,600. A sliding glass door replacement: $2,200 – $5,500. If we find rot or undersized framing, that gets priced as a written change order before any additional work begins. You approve the number, in writing, before we cut.
Call (754) 354-1396 for a free estimate. We’ll measure the opening, check the existing jamb, and give you line-item pricing you can actually compare.
We Also Serve Cities Near Dania Beach
If you’re in Fort Lauderdale, Davie, Oakland Park, or Tamarac, we cover Door Replacement in Dania Beach and the surrounding South Florida market with the same written-price process and 365-Day Done Right Promise. Our crews work the whole coastal corridor from one metro office, so scheduling in Dania Beach doesn’t cost extra.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Dania Beach
Yes. Any exterior door replacement, especially one that changes the opening size or involves impact-rated glazing, requires a permit through the City of Dania Beach Building Department. We pull all permits, schedule inspections, and don’t close out the job until it passes. Call (754) 354-1396 and we’ll handle the paperwork.
A Florida Product Approval means the door passed statewide testing for wind and impact resistance. A Miami-Dade NOA is stricter: it certifies the product meets the High Velocity Hurricane Zone code that applies to Dania Beach and the rest of Broward’s coastal strip. For exterior doors in this city, you need a product with a current NOA, not just a generic state approval.
Look for a sticker or etched mark on the glass that references Miami-Dade NOA or Florida Product Approval. If the sticker is older than the current code cycle or the glass is single-pane, it’s almost certainly not impact-rated. We can inspect the door during a free estimate and tell you exactly what you have.
In Dania Beach, most insurers offer wind mitigation credits for impact-rated doors with a current NOA. You’ll need the product documentation and a wind mitigation inspection report. We provide the product approval documents for every impact door we install, so you can submit them to your carrier. Call (754) 354-1396 for exact pricing on your opening.
Because many older Dania Beach homes have jambs that were sized for thin, single-pane aluminum doors, not modern impact-rated units. When we pull the old frame, we often find rot, undersized studs, or wiring that’s not to current code. We don’t guess and pad the quote. We inspect first, write the allowance into the contract, and only bill you if the work is actually needed, with a signed change order before we cut. Call (754) 354-1396 to schedule your free estimate and we’ll walk the opening with you.
Talk to a Real Person About Your Door Replacement in Dania Beach
If your door leaks when it rains, sticks in the summer humidity, or won’t close tight enough to keep the AC in, it’s time to replace it properly. We’re Juniper Windows Fort Lauderdale, and we’ve been installing doors in South Florida since 2001. The process: call (754) 354-1396, schedule a free estimate, get a written price before work starts, and get a door that’s anchored, sealed, and code-compliant. Covered for 365 days, parts and labor, in writing.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Dania Beach and South Florida since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.