VLX 500 Sliding Window

VLX 500 Sliding Window in Fort Lauderdale, FL | Juniper Windows Fort Lauderdale

The VLX 500 Sliding Window is a high-performance aluminum glazing system built for homes that demand clean sightlines and daily reliability. In Fort Lauderdale, where humidity, salt air, and hurricane-season wind loads punish lesser products, this window holds up without turning into a maintenance headache. We’re Juniper Windows Fort Lauderdale, an authorized ViewLux installation partner serving Fort Lauderdale, FL and surrounding coastal communities. Because we install what we sell, you get a single accountable team from measurement to final seal, and that matters when a window has to perform for decades. Call (754) 354-1396 to talk specs, pricing, or lead times.

Call (754) 354-1396

Product Overview – VLX 500 Sliding Window

The VLX 500 is a slim-profile aluminum sliding system designed around two ideas: the frame should disappear, and the sash should move almost without effort. ViewLux engineered this series with a profile width of just 1.97 inches, which puts more glass in the opening and less metal in your sightline. For a Fort Lauderdale condo overlooking the Intracoastal or a mid-century rancher in Coral Ridge, that’s the difference between a window you notice and a view you enjoy.

It comes in 2-track and 3-track configurations. The 2-track is the workhorse for standard openings, while the 3-track gives you a wider ventilation area when the sashes stack. The glide is genuinely effortless, thanks to heavy-duty rollers riding on reinforced rails rather than plastic clips that bind up after a few humid summers. That matters here. Fort Lauderdale’s humidity finds every weak component in a window, and the VLX 500’s aluminum frame with a 0.079-inch wall thickness resists the twist and sag that make cheaper sliders stick in their tracks.

Buyers choose this series when they want modern aluminum without the flimsy feel some “slim” products deliver. Architects spec it because the narrow profile reads clean from the street. Homeowners pick it because it opens with two fingers and seals tight when closed. We recommend it often for patio-facing walls, sunrooms, and anywhere you want the window to be a frame, not a focal point.

Technical Specifications

The VLX 500 may look minimal, but the spec sheet is anything but thin. Here’s the technical picture, in plain terms:

• Profile width: 1.97 inches, which maximizes glass area while keeping full structural integrity
• Wall thickness: 0.079 inches, adding torsional rigidity that resists racking during high wind events
• Track configurations: 2-Track for standard openings, 3-Track for maximum ventilation when sashes stack
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated (impact-rated laminated glass available for coastal zones)
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Retractable Screen, Sliding Screen
• Thermal break: Standard, with NFRC-rated energy performance for South Florida cooling loads
• Installation standard: AAMA 2400/2410 compliant, AAMA 812 low-expansion foam on all perimeter joints

Every VLX 500 we order for a Fort Lauderdale project is spec’d to the opening size, wind zone, and exposure rating of the specific wall it’s going into. No generic sizing.

Performance Features

Thermal Efficiency – The VLX 500 uses a thermal break that separates the interior and exterior aluminum, cutting conductive heat transfer that turns a metal frame into a radiator. With Low-E glass specified for South Florida’s cooling-dominant climate, expect NFRC-rated numbers that actually help your AC work less in July.

Acoustic Performance – Laminated glass makes a real difference on busy streets. We’ve installed the VLX 500 in Fort Lauderdale homes near Federal Highway and the airport flight paths, and the sound attenuation is noticeable the first night you close the sash. Ask us about treated glass weights for specific decibel targets.

Airtightness & Weather Seal – Multi-chamber gasketing compresses cleanly when the sash locks, which stops the air leaks that drive up humidity and energy costs. Airtightness is also your first line of defense against the tropical moisture that breeds mold around loosely sealed windows in Fort Lauderdale’s wet season.

Waterproofing – The drainage path is engineered: weep channels move water out efficiently rather than letting it pool in the track. Combined with our AAMA 812 foam perimeter seal during installation, the window sheds heavy afternoon thunderstorms without water intrusion at the rough opening.

Wind Resistance – The 0.079-inch profile walls and reinforced corner hardware give the VLX 500 serious wind-load capacity. For Fort Lauderdale properties in higher exposure categories, we specify the laminated impact glass option and size the framing to meet the wind pressures mapped to your address.

Security & Hardware – The sliding sash locks with a positive engagement mechanism that can’t be jimmied from outside easily, and the heavy rail design means the sash can’t be lifted out of the track from the exterior. For ground-floor and canal-side homes in Fort Lauderdale, that’s peace of mind beyond the glass itself.

Color & Glass Options

The VLX 500 comes in six finishes that cover most of what we see across Fort Lauderdale. Premium Black is the go-to for modern builds in Victoria Park and new construction with dark-trim exteriors; it gives a crisp, architectural edge. Pure White suits traditional coastal homes and condo buildings with bright interiors. Anodized Silver is the raw aluminum look, popular in minimalist renovations and beachfront properties where you want the window to read as pure structure. Bronze and Champagne are warmer metallics that pair well with older Florida architecture and homes with earth-tone palettes. Teak Wood finish mimics wood grain for homeowners who want the warmth of wood without termites, warping, or repainting.

On glass, Clear is the budget-friendly standard. Low-E is what we recommend most in Fort Lauderdale, it cuts solar heat gain without dimming the view. Tempered is code-required in many door-adjacent and low sill applications. Laminated adds security and noise reduction, and in impact-rated form it becomes your storm-window solution. Frosted gives privacy for bathrooms, side yards, and street-facing windows where you want light without exposure.

Installation by Juniper Windows Fort Lauderdale in Fort Lauderdale

We install a lot of replacement windows that were installed wrong the first time. That’s the uncomfortable truth of window projects: the product matters, but the installation matters more. A great window with a poor perimeter seal leaks just like a cheap one.

Our process for the VLX 500 starts with a pre-install inspection of every rough opening. We check the framing for rot, verify the opening dimensions match the order, and confirm the exposure rating on the wall before we place a single window. When we set the frame, the standard is level, plumb, and square. No “close enough” from a level that’s a little off. A 1.97-inch profile demands precision; if the rough opening is racked and we force it, the sashes bind and the glass seat stresses.

Every perimeter joint gets AAMA 812 low-expansion foam sealant. That’s the standard we hold across all Fort Lauderdale installations, because coastal moisture will find the one gap you skipped. We follow AAMA 2400/2410 installation standards on the entire scope, then run a final water test on the sill and lower corners before we call the job done.

Here’s the warranty reality: ViewLux warranties their product, but a manufacturer warranty won’t protect you from water intrusion caused by poor flashing or a crooked frame. Improper installation can void the product warranty entirely. When Juniper Windows Fort Lauderdale installs your VLX 500, we take responsibility for the whole assembly, product and seal, which is the only way a window warranty should work.

One Fort Lauderdale-specific note: building code requirements for wind-borne debris zones vary by address, even within city limits. We know which overlays apply in which neighborhoods and we’ll spec the right glass package the first time, so you don’t pay for a window that fails inspection or buy impact glass you didn’t need.

Frequently Asked Questions – VLX 500 Sliding Window

What is the lead time for the VLX 500 Sliding Window?
The VLX 500 typically takes 3 to 5 weeks from confirmed order to delivery at our Fort Lauderdale warehouse, depending on glass type, finish, and track configuration. Custom sizes and laminated glass can add time. Call (754) 354-1396 and we’ll give you a realistic date for your specific order before you commit.

Does the VLX 500 qualify for energy tax credits?
In many cases, yes. The VLX 500’s thermal break and Low-E glass options can meet the minimum energy performance thresholds for federal residential energy tax credits. We don’t claim a credit until we verify the NFRC ratings on your exact glass package. Ask us for the performance labels when we quote your Fort Lauderdale project.

What warranty comes with the VLX 500 Sliding Window?
The VLX 500 carries a manufacturer-backed warranty through ViewLux covering the frame, hardware, and glass per their published terms. Installation by an authorized partner like Juniper Windows Fort Lauderdale keeps that warranty valid. If another contractor installs it wrong and the window fails, you’re on your own. Call (754) 354-1396 and we’ll walk you through exactly what the coverage includes for frame, hardware, and glass.

Can I customize the size of the VLX 500?
Yes. The VLX 500 is ordered to the rough opening dimensions of your specific project, not sold in fixed stock sizes. We measure, you pick the track configuration and finish, and the window is fabricated to fit. That also means we catch undersized or oversized openings during site measurement before you pay for anything. Call (754) 354-1396 to schedule a measurement.

How do I maintain aluminum frames in Fort Lauderdale’s coastal climate?
Aluminum is exceptionally low-maintenance, but salt air will eventually etch any metal if you ignore it. Rinse the frame and tracks with fresh water every few months, keep the weep holes clear of debris, and clean the gaskets with mild soap. Wipe the track dry if you notice standing water after heavy rain. It’s ten minutes a season, and it’ll keep your VLX 500 gliding like the day we installed it.

Get a Quote – VLX 500 Sliding Window in Fort Lauderdale

You’ve done the research. Next step is a number you can plan around. We’ll measure, spec the right glass for your wind zone, and give you a written line-item quote, no pressure, no change orders after the fact. Juniper Windows Fort Lauderdale has the product knowledge and the installation discipline to make your VLX 500 last. Call (754) 354-1396 today to start your project or schedule a free on-site measurement in Fort Lauderdale.

Written by the team at Juniper Windows Fort Lauderdale, authorized ViewLux installation partner serving Fort Lauderdale, FL.