New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ViewLux Windows & Doors in Fort Lauderdale, FL | Juniper Windows Fort Lauderdale
We provide independent ViewLux service across Fort Lauderdale, from single-window rebuilds to Window Replacement in Fort Lauderdale for full-frame impact units. What sets our ViewLux work here apart is the salt-air angle: we’ve spent years rebuilding corroded corners, un-jamming salt-laden sliders, and re-flashing old jalousie header channels that other crews miss entirely. Call (754) 354-1396 and you’ll get a written price before anyone touches a screw, plus a live arrival time so you’re not stuck waiting on a four-hour window.
Why Fort Lauderdale Residents Choose Us for ViewLux Service
Sean Mackey, our owner, grew up in Los Angeles and learned construction fundamentals at LA Trade-Technical College. But the real education came from watching what Florida salt air does to an aluminum frame over fifteen or twenty years. His crew has worked from Las Olas Boulevard condos to single-family homes in Coral Ridge, and that repetition built a mental catalog of exactly how ViewLux units fail in this climate. We don’t guess. We know which series corrodes at the corners first, which seal lets go after repeated pressure cycles, and which repair path actually holds. When you see our ViewLux sales & service approach, you’ll notice we reach for a rebuild before a replacement whenever the extrusion is still sound. That alone saves Fort Lauderdale homeowners thousands on units that other companies write off.
Common ViewLux Windows & Doors Problems We Solve in Fort Lauderdale
- Salt-air pitting on aluminum frame corners and sill tracks. Waterfront condos and homes within a mile of the Intracoastal get constant salt deposition. On ViewLux 5400 casements, we routinely see the bottom hinge boss eaten away until the sash sags or snaps. We rebuild the corner with marine-grade aluminum and reset the hinge, then test the unit before we leave.
- Weep-hole blockage causing standing water and frame rot at sill edges. Wind-driven rain in Fort Lauderdale pushes debris straight into the track. Once the weep holes clog, water sits against the frame and the rot follows. We clear the channels, verify drainage, and replace any compromised weatherstripping so it doesn’t return next storm season.
- Roller and track wear on 8700 and 7600 sliders. Daily operation with salt on the track acts like sandpaper. ViewLux horizontal rollers get stiff, then they stick. Sometimes the track itself is scored beyond smooth operation, which means we swap the roller assembly and dress the track in the same visit.
- IGU seal failure and interior fogging on older impact units. Hurricane-season pressure cycles flex the unit. After enough cycles, the seal between panes lets go and you get permanent fog. When the frame is still straight, we replace the insulated glass unit and re-seal, bringing clarity back without a full-frame tear-out.
- Leaky jalousie-to-impact transitions. Sailboat Bend and other older Fort Lauderdale neighborhoods still have original jalousie windows. When a ViewLux 3900 single-hung impact goes in, the old jalousie header channel often stays behind, leaving a hidden leak point at the top seam. We re-flash that seam before installing the new unit, every time.
ViewLux Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
In Sailboat Bend, we pulled a corroded ViewLux 5400 casement from a 1960s ranch where the bottom hinge boss had snapped clean off from salt pitting. Most companies would order a whole new sash and charge you for the wait. We rebuilt the corner with a marine-grade aluminum repair piece, reset the sash with a new hinge kit, and replaced the failed glazing bead, then pressure-tested the unit to 45 psf that same afternoon. The takeaway for Fort Lauderdale ViewLux owners: the frame is rarely the problem. The corrosion attacks specific points, the hinge bosses, the sill corners, the track ends. If you catch it before the extrusion buckles, we can rebuild it. If you don’t, you’re buying a full replacement. That’s why the minute you see white powder or raised blisters on an aluminum frame, you should call. It doesn’t get better on its own in this air.
ViewLux Models & Products We Service in Fort Lauderdale
We service the ViewLux 5400 Series aluminum casement and picture windows, the 8700 Series vinyl horizontal roller and single-hung units, the 7600 Series sliding glass doors, and the 3900 Series single-hung impact windows. Parts matter. We use genuine ViewLux hardware, seal kits, and cranks where the manufacturer still produces them. For out-of-production series, we source dimensionally matched, corrosion-resistant aftermarket rollers, balances, and weatherstripping built to take salt air. If you’ve got a mid-2000s impact unit that’s fogged or sticking, call before you assume you need Window Installation in Fort Lauderdale. We replace frames and sashes only when the extrusion is corroded or bent beyond safe sealing. Otherwise we rebuild and re-seal to stretch the life of the unit.
ViewLux Service Pricing in Fort Lauderdale
ViewLux repair pricing in Fort Lauderdale depends on what failed and how far the corrosion went. Here’s what you’re looking at, roughly:
- Roller and track rebuild on an 8700 or 7600 slider: $180 – $340 per panel
- IGU seal replacement with new insulated glass (residential sizes): $350 – $650 per sash
- Corner rebuild on a 5400 casement frame: $220 – $420 depending on hinge boss condition
- Full-frame ViewLux replacement with impact glass: $900 – $2,400 per opening, size and series dependent
These aren’t quotes, they’re ranges so you can budget before the truck rolls. Every job gets a written line-item price before work starts, no vague verbal estimates. If the number changes once we open the wall, we stop and tell you before spending another dollar. Call (754) 354-1396 to schedule a free estimate and get an exact number.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ViewLux Windows & Doors in Fort Lauderdale
Yes, if the extrusion is still straight and the pitting hasn’t eaten through the structural web, we rebuild the corner with a marine-grade aluminum patch and reset the sash with new hinges. The corrosion is usually localized to the hinge boss or sill end, so a full frame replacement isn’t necessary. Call (754) 354-1396 and we’ll put an eye on it before you spend real money.
The track is loading with salt and fine debris during Fort Lauderdale’s summer downpours, and the roller bearings are grinding against it. Weepholes clog, water sits, the track swells slightly with corrosion, and the sash sticks. Clearing the drainage channels and replacing the roller assemblies usually solves it. Call (754) 354-1396 for a quick inspection.
Most of them are repairable. The frames on mid-2000s ViewLux impact units are generally still structurally sound, even in salt-heavy areas near the Intracoastal. The typical failures are IGU seal fogging, worn rollers, and weatherstripping shrinkage, all of which we fix without replacing the whole unit. Full replacement only makes sense when the extrusion is corroded through or the frame is racked.
We can match the finish closely enough that you’d have to look twice. For painted or anodized frames, we prep the repair area, use a corrosion-inhibiting primer, and then match the original tone. On white vinyl frames we’re replacing weatherstripping or rollers, not repairing pits, so the finish question rarely comes up.
Sometimes we have them, sometimes we don’t. For older ViewLux casement operators where the original crank is discontinued, we source a corrosion-resistant aftermarket operator that fits the existing spline and mount points. It functions the same without forcing a full sash swap.
Service Areas Near Fort Lauderdale
We run ViewLux service calls throughout Fort Lauderdale service area and into the surrounding communities, including ViewLux service in Davie, ViewLux service in Oakland Park, Tamarac, Coconut Creek, and Hallandale Beach. Salt air doesn’t stop at the city line, so neither do we.
Book Your ViewLux Service in Fort Lauderdale Today
If a ViewLux window is sticking, fogging, or showing white corrosion around the frame, don’t wait for the next storm cycle to finish it off. Call (754) 354-1396 and we’ll get you on the schedule. You’ll get a live arrival time, a written price, and the 365-Day Done Right Promise on every repair, parts and labor, in writing.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Fort Lauderdale since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.