Therma-Tru Door Installation Nationwide

Therma-Tru Door Installation: The Fort Lauderdale Owner’s Guide

We stock and install Therma-Tru-compatible door components across Fort Lauderdale, with most replacement jobs running between $220 and $640 installed depending on the part and your door’s series. We typically complete Therma-Tru part swaps the same day we arrive, and the parts that fail most often (sweeps, weatherstripping, threshold caps) are on our trucks right now. Most Fort Lauderdale homeowners discover a failed part the same way: a door that suddenly drags against the threshold after a humid stretch, daylight sneaking in along the latch side, or a deadbolt that no longer lines up with the strike plate. None of these are cosmetic. In South Florida, a compromised door seal means conditioned air leaking out and salt-laden moisture working its way into your frame, and that’s a bill that compounds every month you let it ride.

Call (754) 354-1396

Which Therma-Tru Models This Applies To

Seamoss Juniper Windows Fort Lauderdale is an independent service provider, not affiliated with Therma-Tru, but we work on their door lines daily. The compatibility picture matters more with Therma-Tru than with most brands because they manufacture distinct series (Classic-Craft, Fiber-Classic, Smooth-Star, Pulse, and Benchmark) and each has its own hinge geometry and sweep profile. A Smooth-Star sweep will not seat correctly on a Classic-Craft door bottom, no matter how many times you trim it. Here’s the gotcha most owners hit: Therma-Tru stamps the model information on the hinge edge of the door slab, not the frame. You’ll need a flashlight and sometimes a step stool, but the series name and build date are there. Match that series and we can quote the exact part over the phone in about four minutes. For owners deciding between OEM and aftermarket: Therma-Tru OEM sweeps and weatherstripping come with their Fire-rated core specs intact and last measurably longer than generics in Fort Lauderdale’s UV-heavy climate. We keep OEM on hand for Classic-Craft and Smooth-Star, and quality aftermarket equivalents (Tru-Lite and similar) for owners who want the same fit at roughly 40% less. The decision is yours, and we’ll quote both.

Signs Your Therma-Tru Door Installation Is Failing

• Daylight or a visible gap along the sweep. The vinyl sweep compresses over time or tears at the corners, and the bottom of the door loses contact with the threshold. On a ground-level Fort Lauderdale slab, that gap becomes a highway for ants and humidity the first afternoon it opens up.
• The door drags or requires a shoulder to close. Most people blame the hinges, but on Therma-Tru doors it’s usually the threshold cap or the sweep binding after rain swells the frame. Dragging scrapes the sweep down to the aluminum carrier, and once that carrier hits concrete you’re replacing both parts.
• Hinges that sag or squeak even after oiling. Therma-Tru’s adjustable hinges on Classic-Craft and Pulse series wear at the knuckle, especially on south-facing doors that take direct Florida sun. A sagging hinge throws the entire latch alignment out of square, and no amount of strike plate filler fixes the real problem.
• The deadbolt no longer throws smoothly. This is almost never the lock itself. It’s the door settling out of alignment because a hinge or the threshold has shifted. The deadbolt binds because the bore and strike don’t line up by as little as 1/16 inch.
• Water staining or softness at the bottom corners of the frame. Fort Lauderdale’s afternoon downpours expose frame seals fast. When the corner pads or weatherstrip fail, water doesn’t pour in; it wicks up into the composite jamb and does structural damage you won’t see until the door stops latching entirely.

Replacement Cost & What’s Included

Here’s the honest pricing picture for Therma-Tru door work in Fort Lauderdale:

• Weatherstripping or sweep replacement: $220 – $310 installed, parts included.
• Threshold cap replacement (with new corner pads and sealant): $260 – $380 installed.
• Hinge replacement or realignment (set of three, including re-hanging the slab): $310 – $480 installed.
• Full weatherseal kit (sweep, jambs, header, threshold cap): $480 – $640 installed.

The range is driven by which series you own (Classic-Craft parts run higher than Smooth-Star), whether your frame needs shimming work, and whether we’re addressing one part or a full perimeter seal. Every job gets a written price before we start. That number includes parts, labor, disposal of the old components, and our 365-Day Done Right Promise: if anything we installed fails within a year, we fix it at no charge, parts and labor, in writing. Sean Mackey has been crawling around Fort Lauderdale door frames long enough to know the difference between a part that’s worn out and one that was never installed correctly. We fix both, but we only charge you once.

DIY or Call Us?

Some of this work is owner-friendly. Replacing a torn sweep on a Smooth-Star door takes about twenty minutes with a screwdriver and a hacksaw, and we’re happy to tell you exactly which part to order and how to do it if you call. Same with adjusting the strike plate on a door that’s just barely sticking. What we’d steer you away from: re-hanging a door on worn hinges, replacing a threshold cap on a frame that’s already shifted, or anything on a door that’s also your hurricane protection line. A misaligned Therma-Tru door in Fort Lauderdale doesn’t just look bad; it compromises the seal that keeps wind-driven rain out of your entry during a storm. If the job requires pulling the slab or involves high-tension hinge undercuts, call us. The free estimate takes thirty minutes, and you’ll know the exact number before you commit to anything. Reach us at (754) 354-1396.

FAQs