New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Installation: The Fort Lauderdale Owner’s Guide
Mr-Glass window installation in Fort Lauderdale typically runs $85 to $210 for a parts-matched replacement on most residential units, and our trucks carry the common Mr-Glass hardware so we can usually swap it the same day. The installed price includes the new part, removal of the failed component, proper alignment, and a written warranty on labor for 365 days. Most homeowners discover the problem when a window suddenly won’t stay open, a latch stops catching, or a crank spins without moving the sash. You’ll notice it gets worse when the humidity climbs, because salt air and moisture accelerate wear on moving hardware faster than anything else we see along the coast.
Key Takeaways
- Installed Mr-Glass window installation typically costs $85 to $210 in Fort Lauderdale, depending on the part and your window series.
- We stock Mr-Glass-compatible hardware and can match most parts by photo or measurements before we arrive.
- Every job gets a written price before work starts, backed by the 365-Day Done Right Promise.
- Call (754) 354-1396 for a free estimate, and a live person answers.
Which Mr-Glass Models This Applies To
Mr-Glass builds window installation components that show up across several popular residential series, and the compatibility question is the first thing we nail down. Most Fort Lauderdale homes we see have either the Mr-Glass horizontal slider line or their single-hung units, and the hardware differs between them. The quickest way to identify what you’ve got is to look for a small etching or label in the corner of the glass, usually near the spacer bar. If that’s worn off, measurements work: sash thickness, track width, and the screw-hole spacing on the balance or latch get us to the right part fast.
When it comes to Mr-Glass parts specifically, OEM hardware fits exactly as designed, with the right tolerances for the track and frame. Quality aftermarket equivalents exist for latches, rollers, and balances, and they can save $20 to $40 per window when the original part is discontinued. We’re honest about the trade-off: aftermarket parts work well for mechanical hardware, but we recommend OEM for anything that seals the sash against wind and water. One gotcha we run into regularly in Fort Lauderdale is older Mr-Glass single-hungs with non-standard balance lengths. Homeowners buy a universal replacement and find it binds or drops. We carry the common lengths in our trucks so that particular headache doesn’t become yours.
Signs Your Mr-Glass Window Installation Is Failing
- Sash won’t stay up: The balance mechanism has lost tension or a spring inside it snapped. This is the most common failure in Fort Lauderdale, where years of humidity and salt exposure quietly corrode the internal spring.
- Crank spins without moving the window: The operator gear has stripped, usually because the sash was forced against a swollen track or accumulated debris. Brute force on a hard-to-turn crank is what finishes these off.
- Window rattles in the frame: Worn or flattened rollers, or a latch that no longer pulls the sash tight enough to compress the weatherstripping. Once the seal is loose, air and moisture find their way in, and so do noise and higher cooling bills.
- Lock or latch won’t catch: The keep and lock body have drifted out of alignment, often because the frame has settled or the sash has sagged a fraction of an inch over time. It’s not just annoying; it’s an invitation for an unlocked window, which no one in Fort Lauderdale wants on a ground floor.
- Window is hard to slide or open: Track rollers packed with sand, salt, and grit, or a frame that’s out of square from years of heat expansion and contraction. Forcing it open usually breaks the hardware that was already on its last season.
Replacement Cost & What’s Included
Here’s what Mr-Glass window installation parts cost installed in Fort Lauderdale, based on the jobs we do weekly.
| Part or Service | Typical Installed Range |
|---|---|
| Single latch or lock replacement | $85 to $120 |
| Roller set replacement (per window) | $110 to $160 |
| Balance or spiral tension replacement | $140 to $210 |
| Crank operator replacement | $120 to $175 |
| Full sash hardware refresh (parts + labor) | $190 to $280 |
The price moves based on your Mr-Glass series, whether we’re using OEM or quality aftermarket, and how much disassembly the job needs. What doesn’t move is the number we give you before the first screw comes out. You get a written line-item price, and that’s the price. Every Mr-Glass window installation we do in Fort Lauderdale includes the part, the labor, alignment, a function test, and our 365-Day Done Right Promise covering parts and labor for a full year. If it’s not right, we make it right, and a second visit is free.
DIY or Call Us?
Some Mr-Glass window installation hardware is genuinely simple to check, and we’ll tell you the truth. You can inspect a latch or keeper for visible cracks or screws backing out. But once you’re dealing with the balance tension or a crank operator, there’s a real risk of the sash slamming down on fingers or the spring unloading in a way that takes a chunk of frame with it. These parts are under constant tension, and we’ve repaired enough DIY attempts to know it’s usually more expensive than calling us first.
If the window is stuck, jammed, or the crank is grinding, don’t force it. That’s how a $40 part becomes a $200 hardware repair plus a bent frame. Call (754) 354-1396, describe what it’s doing, and we’ll give you an honest read on whether it’s a quick fix or a parts-swap visit. Estimates are free, and a real person answers the phone.
FAQs
Most mechanical Mr-Glass hardware lasts 7 to 12 years in coastal Fort Lauderdale conditions, with latches and crank operators typically failing on the shorter end of that range due to salt air corrosion. Windows that face east and get direct morning sun plus afternoon rain tend to wear fastest. If your unit is older than a decade and the hardware is original, we typically recommend a proactive refresh before you lose function mid-season. Call (754) 354-1396 and we’ll tell you honestly what’s left in your parts.
In most cases, Mr-Glass window installation hardware is built as replaceable components, not rebuildable units, so a cracked latch housing or a stripped crank gear is a replacement, not a repair. The exception is usually alignment: sometimes a keeper just needs repositioning, which is a quick service call. We’ll always give you that option first if it’s viable, and the quote is free at (754) 354-1396.
A single Mr-Glass window part replacement takes 45 to 90 minutes on site for most Fort Lauderdale homes, including removal, alignment, and function testing. Multiple windows in one visit move faster per unit. We schedule a live arrival window so you’re not stuck waiting around.
Our Fort Lauderdale trucks carry the Mr-Glass hardware we replace most often, including latches, rollers, balances, and crank operators for the common residential series. Odd sizes or discontinued parts may take a day or two to source, and we’ll tell you that before you’re committed. A phone call to (754) 354-1396 gets you a straight answer on stock and a written quote.
Written by Sean Mackey, Owner, Juniper Windows & Doors – Fort Lauderdale at Juniper Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.