New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide
If your ECO Window Systems sliding or patio door is sticking, grinding, or refusing to lock, the fix usually comes down to one of four parts: rollers, track, handle/lock set, or weatherstripping. We stock and install ECO Window Systems-compatible sliding and patio door parts across Fort Lauderdale, with typical installed prices running $145 to $680 depending on what’s failed and which ECO series you have. Most owners discover the problem the same way: a door that used to glide with one finger now takes a shoulder to move, or a lock that won’t catch because the door has settled out of alignment. We’re an independent service provider, not affiliated with ECO Window Systems, but we’ve worked on enough of their doors across South Florida to know exactly what fails first and what fits.
Key Takeaways:
- ECO Window Systems door parts we replace most often: rollers, track assemblies, handle/lock sets, weatherstripping, and threshold caps.
- Typical installed cost in Fort Lauderdale: $145 to $680, depending on the part and series.
- We match parts to your specific ECO series, not a generic “close enough” replacement.
- Every job gets a written price before we turn a screw, and the work carries the 365-Day Done Right Promise.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds several sliding and patio door lines, and the part that fits one series won’t always fit another. The three-digit or four-digit series code is stamped on a small label usually found on the top edge of the sliding panel or inside the bottom track. You’ll see designations like the ECO 4000, 5000, 6000, or 9000 series, and each uses slightly different roller housing dimensions and lock geometry. If the label has faded off (South Florida humidity eats paper labels for breakfast), we can also match the part by measuring the roller housing width and the door’s actual panel weight, which varies based on glass package and panel size. Here’s the compatibility gotcha most owners don’t know: ECO Window Systems uses two distinct roller styles, a single-wheel and a tandem dual-wheel, and installing the single-wheel version on a heavy, impact-rated panel rated for the tandem roller means the replacement will fail again within a year. We stock both styles on our trucks. When it comes to OEM versus quality aftermarket equivalents, we lean OEM or OEM-spec for rollers and lock sets because the tolerances are tight; for weatherstripping and threshold caps, a high-quality aftermarket match often lasts just as long in Fort Lauderdale’s sun and salt air at a lower price.
Signs Your ECO Window Systems Sliding & Patio Doors Is Failing
- The door sticks or drags when you slide it. This is almost always tired rollers, often worn flat on one side after years of carrying a heavy impact-glass panel. Flat-spotted rollers also gouge the track over time, which turns a simple roller swap into a track replacement if left too long.
- The door lifts when you pull the handle. The rollers have worn down or the adjustment screws have backed out. You’re now dragging the door’s full weight on the track, which accelerates wear on everything else.
- The lock won’t catch or you have to lift the door to lock it. The panel has settled as rollers wore, so the strike plate and latch no longer line up. Forcing the lock eventually bends the latch or cracks the handle housing.
- You feel a draft or see daylight under the door. Weatherstripping on ECO patio doors is a foam-and-vinyl compression seal that breaks down after a few seasons of Florida sun. Once compressed flat, it won’t spring back, and your July electric bill notices.
- The track collects water after heavy rain. The weep holes at the bottom of the outer track are clogged or the threshold cap has cracked. Standing water in the track corrodes roller bearings and invites the grinding noise you’re now hearing.
Replacement Cost & What’s Included
For ECO Window Systems sliding and patio doors in Fort Lauderdale, here’s what we typically see on installed price, including the part and our labor to install it:
- Roller replacement (pair): $145 to $260 installed. Price moves with single-wheel versus tandem roller and how much adjustment the door needs after.
- Handle and lock set replacement: $165 to $340 installed, depending on keyed cylinder and finish match.
- Weatherstripping replacement (full perimeter): $120 to $220 installed.
- Track repair or section replacement: $240 to $480 installed if we can replace a section rather than the full run.
- Full track replacement (heavily gouged or corroded): $480 to $680 installed.
What drives the range is the specific ECO series, whether we’re matching a tandem or single roller, and how much the door has drifted out of square, which takes extra adjustment time to fix properly. Every job gets a written price before work starts, so the number you approve is the number you pay. The work carries our 365-Day Done Right Promise in writing: parts and labor covered for a full year. If a repair fails within that year, we come back on a free second visit, no charge, no argument.
DIY or Call Us?
This one is mostly safe to work on, and I’ll tell you straight: if you just want to see whether the rollers are the problem, you can look at the bottom edge of the sliding panel with a flashlight. If the wheels are flat-spotted or the door visibly sits low, that’s your answer. What I’d skip doing yourself is pulling the panel to swap rollers. A sliding patio door with impact-rated glass can weigh 150 to 300 pounds depending on panel size, and once it’s off the track, it’s a two-person job just to handle it safely. Getting the panel tilted out wrong can shatter the glass or drop the door on tile. We do this specific repair a few times a week across Fort Lauderdale, and it’s a 45-minute job with the right tools and the right rollers already on the truck. If you’d rather not wrestle a door panel that weighs more than you do, call us at (754) 354-1396 and we’ll handle it.
FAQs
Most ECO sliding door rollers last 7 to 10 years in South Florida’s humidity and salt air before they start flat-spotting or grinding. Doors facing direct afternoon sun or within a mile of the coast tend to wear faster because the bearings dry out and the track picks up more grit.
If your door is over seven years old and starting to drag, a roller replacement now often saves you a full track replacement later. Call (754) 354-1396 and we’ll give you an honest read on which side of that line your door is on.
Yes, in most cases. We repair ECO sliding and patio doors regularly, replacing rollers, lock sets, weatherstripping, and track sections without pulling the whole frame. Full door replacement only makes sense when the frame itself has corroded through or the glass package has failed and the door is near the end of its useful life anyway.
We’ll tell you which one you need, with a written price either way. Call (754) 354-1396 for an assessment.
Most ECO roller or handle set replacements take 45 minutes to an hour once we’re on site. A full track replacement runs two to three hours because we have to unseat the panel, remove the old track, set the new one level, and re-hang and adjust the door.
You’ll get a live arrival time before we head your way, and a written price before any work starts. Call (754) 354-1396 to book.
We keep the most common ECO Window Systems parts on our trucks: single-wheel and tandem rollers, handle and lock sets in the standard finishes, weatherstripping profiles, and threshold caps. If your door needs a less common part, we source it the same or next business day in Fort Lauderdale.
We also stock compatible parts for PGT, CGI, and CWS doors, so if you have a mixed house of brands, we can usually handle everything in one visit. Call (754) 354-1396 and we’ll confirm what we need to bring.
If I wouldn’t put it on my own house, I’m not recommending it for yours. That’s the standard every ECO Window Systems door we repair gets, and it’s how Sean Mackey and the crew at Juniper Windows Fort Lauderdale have been doing this since Juniper opened its doors in 2001 as part of the Relay Home Co. family. When you book with us, you get a live arrival time you can track, before-and-after photos of every repair, a written price before anything starts, and a digital invoice you can pay from a link. Calls are answered by a real person 24/7, not a voicemail queue.
To schedule a free estimate on your ECO Window Systems sliding or patio door repair in Fort Lauderdale, call (754) 354-1396. We’ll get a real person on the phone and a real number in writing.
Written by Sean Mackey, Owner, Juniper Windows & Doors – Fort Lauderdale at Juniper Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.