New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Windows & Doors in Davie, FL | Juniper Windows Fort Lauderdale
We’re an independent Cws sales & service provider based in Fort Lauderdale, repairing and retrofitting CWS windows and doors throughout Davie. We’re not manufacturer-affiliated or an authorized dealer. What makes our CWS work different in Davie is straightforward: we know how these aluminum-frame units fail on ranch homes and equestrian properties built before 1992, and we fix them without telling you to replace everything. For CWS service in Davie, call (754) 354-1396.
Why Davie Residents Choose Us for CWS Service
Most window companies in South Florida treat CWS like an afterthought. We don’t. Our crew has spent more than a decade rebuilding CWS horizontal rollers, single hungs, and 3-lite sliders across our Davie service area‘s large-lot neighborhoods, which means we’ve seen every failure mode this climate can produce. We stock genuine CWS hardware for roller assemblies and locks, and when an older frame needs corrosion-resistant upgrades, we carry stainless-steel aftermarket components that outlast the originals in Davie humidity. That’s the practical difference: we’re not guessing. We’ve done this specific repair on this specific house style, dozens of times, within ten miles of where you’re standing.
Our owner, Sean Mackey, cut his teeth in construction at Los Angeles Trade-Technical College and has spent the better part of two decades in Fort Lauderdale watching what Florida weather does to a poorly sealed frame. He’s been on enough Davie ranch homes to tell you exactly why your CWS slider binds at 3pm in August. If I wouldn’t put it on my own house, I’m not recommending it for yours. That’s the standard, and it applies to every CWS repair we quote in Davie.
Common CWS Windows & Doors Problems We Solve in Davie
- Corroded roller tracks on CWS horizontal rollers. Davie’s humidity and storm-driven air work through the original aluminum tracks on CWS Series 700 rollers. The metal pits, the nylon rollers grind, and the panel starts to drag or jam entirely. We replace the track and upgrade to stainless-steel rollers that don’t seize up in subtropical conditions.
- Warped or delaminated vinyl sashes. On western Davie ranches, decades of direct UV and heat pull CWS vinyl sashes out of square. The corners fatigue, the sash bows, and the weatherstripping won’t seat. We’ve replaced enough of these to know when a sash can be saved and when the whole insert needs to go.
- Fogged double-pane glass on pre-1992 homes. Davie has a lot of homes built before Hurricane Andrew pushed code changes through. Their original CWS double-pane units were never built for 30 years of thermal cycling. When the seals fail and condensation sits between the panes, we swap the glass pack and, where you want it, step up to impact-rated laminate.
- Misaligned 3-lite sliding doors. Davie’s large-lot ranches sit on slab foundations that settle unevenly over time. When the slab moves, the CWS 3-lite track binds at the center and the door won’t close cleanly. We re-shim the frame, realign the rollers, and get the door gliding again without replacing the whole opening.
- Failed crank mechanisms on CWS casement windows. The operator gears on older CWS Series 800 casements strip out after years of forcing against warped sashes. It’s not a window replacement issue – it’s a hardware swap, done in under an hour when parts are on the truck.
CWS Service in Davie: What Local Conditions Mean for Your Equipment
Many of the ranch homes along tree-lined streets in western Davie, near the town’s rural enclaves, were built before the South Florida Building Code mandated impact protection. We regularly find non-standard CWS frame widths in these homes – frames that don’t match today’s off-the-shelf replacement sashes and can’t simply be pulled and swapped. So the job becomes a custom retrofit: shimming the existing opening, fabricating or ordering a sash cut to the original frame’s exact dimensions, and anchoring it to meet current wind-load requirements without ripping out the rustic exterior trim that gives these homes their character. That’s the kind of work generic window crews walk away from. In Davie, it’s what we do most weeks. The alternative – full frame replacement on every pre-1992 opening – often costs triple what the retrofit costs, and you lose the look of the original windows in the process.
CWS Models & Products We Service in Davie
We service the CWS lines most common across Davie’s housing stock: the Series 450 Single Hung, the Series 700 Horizontal Roller, the 3-Lite Sliding Door, and the Series 800 Casement. For matching roller assemblies and locks, we use genuine CWS hardware when it’s available. For older frames where the original aluminum components have already corroded once, we recommend aftermarket stainless-steel rollers and heavy-duty weatherstripping that handle Davie’s humidity better than the factory parts did. We stock common roller kits, weatherstripping profiles, and hardware sets for CWS units, so most Davie repairs don’t wait on a shipment. And we tell you straight when a unit isn’t worth repairing – severe frame corrosion or a glass pack that’s lost its insulating gas usually means replacement is the cheaper decision over five years.
CWS Service Pricing in Davie
What you’ll pay depends on what failed. Roller and track replacement on a CWS Series 700 horizontal roller in Davie typically runs $220 to $410 per panel, including parts and labor. Crank replacements on a Series 800 casement land around $165 to $280 per window. A fogged double-pane glass pack swap runs $310 to $580 per sash, and stepping that up to impact-rated laminate will add $90 to $220 per unit. Custom retrofits for pre-1992 frames, like the ones we do on western Davie ranch homes, typically range from $600 to $1,400 per opening, because the work includes custom shimming, wind-load anchoring, and often a new sash built to the original opening. Every quote is a written price before any work starts, so you’re not guessing at the end. Call (754) 354-1396 for a free estimate on your CWS repair in Davie.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Windows & Doors in Davie
Usually, yes. On most Davie ranch homes with CWS Series 700 horizontal rollers, we can keep the existing aluminum frame, shim and anchor it to meet current wind-load requirements, and install a new impact-rated laminate sash cut to the original opening. This costs significantly less than our Window Replacement in Davie and preserves your home’s original exterior trim. The exception is when the frame itself is severely corroded – then the metal is no longer structural and replacement is the only safe option. Call (754) 354-1396 for an exact quote on your specific openings – estimates are free.
In Davie, the usual cause is corrosion on the aluminum roller track combined with slab settling. Humidity and storm-driven air pit the track, while the large-lot ranch slabs shift slightly over decades, throwing the frame out of square. The fix is a new stainless-steel track, realigned rollers, and re-shimming the frame to level – typically a same-day repair. If corrosion has eaten through the track and into the frame itself, we’ll tell you, because that changes the recommendation from repair to our Window Installation in Davie.
They do. The operator gears inside the crank strip over time, especially when a vinyl sash has warped and the owner has to force the crank against resistance. The fastest fix is replacing the crank mechanism with a new gear assembly, which takes under an hour on most CWS Series 800 casements. We carry common crank kits on the truck, so a Davie call often turns into a finished repair on the first visit. Call (754) 354-1396 if you’re cranking against resistance – a stripped gear is cheaper to fix before it fails completely.
You’ll see fog or condensation trapped between the two panes that doesn’t wipe off from either side. That means the seal has failed and the insulating gas between the panes has escaped. On CWS units in Davie’s prep-1992 homes, this is common after 20 to 30 years of thermal cycling. Yes, you can replace just the glass pack – we do it routinely – and it’s a good moment to step up to impact-rated laminate if you’ve been putting off hurricane protection. Expect $310 to $580 per sash in Davie. Call (754) 354-1396 for a written quote on your units.
We match as closely as the product line allows. CWS frame finishes and hardware styles can change between manufacturing years, so an exact match isn’t always available off the shelf, but we use genuine CWS hardware where it exists and source finishes that read consistent from the street. For older CWS units where the original finish has been discontinued, we’ll show you the closest available option in person before ordering so there are no surprises after install. For matching hardware on a specific CWS window in Davie, call (754) 354-1396.
Service Areas Near Davie
We handle CWS service calls across Davie’s neighborhoods, and we work regularly in the surrounding cities – from western Davie ranch homes to older residential blocks in CWS service in Oakland Park, to the denser coastal housing stock where our CWS service in Fort Lauderdale crews know the pre-Andrew build patterns. We also cover Cooper City, Plantation, and the unincorporated ranch land immediately west of Davie. If your home is within driving distance of Davie, call and we’ll confirm coverage.
Book Your CWS Service in Davie Today
If your CWS window or door is binding, fogged, cranking hard, or just not closing right, we’ll send a background-checked technician who has worked on your exact unit before. Every job gets a written price first. Call (754) 354-1396 to schedule your free estimate in Davie.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Davie and the surrounding area.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.