New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Davie
Window installation in Davie runs $600 – $2,800 per opening for most retrofit work, with picture windows landing between $800 and $2,200 and bay window installations typically ranging $2,400 – $6,800 depending on glass package and framing scope. That’s the honest ballpark, and we’ll lock your exact number in writing before any work starts. Davie isn’t a cookie-cutter suburb. Between the ranch homes off Shotgun Road, the equestrian acreage out west, and the newer Mediterranean builds near Pine Island Ridge, no two window jobs here look the same. Our Window Installation crew knows the county permitting maze, the wind-borne debris zones, and the older framing quirks that make Davie different from Fort Lauderdale or Plantation. Call (754) 354-1396 and we’ll give you a straight answer and a written price.
Key Takeaways:
- Written price before any work starts, backed by the 365-Day Done Right Promise
- Impact-rated and low-E glass options for every budget, from single hung to bay windows
- We handle Broward County permits, septic and well setbacks, and HVHZ code compliance
- Live arrival time tracking, before-and-after photos, and a digital invoice
Why Juniper Windows Fort Lauderdale Is Davie’s Preferred Window Installation Company
We’ve spent years working Davie’s mix of 1970s ranch homes, custom equestrian properties, and newer construction. That local reps matter here because Davie sits in a unique spot: 10 miles inland, so storm surge isn’t your first worry, but wind loads absolutely are. Homes built before the 1992 Hurricane Andrew code revisions often have single-pane aluminum frames and non-standard rough openings that a generic installer will fight. We don’t fight them, we plan for them.
Our technicians are background-checked, uniformed, and dispatched with live arrival times you can track from your phone. When we say we’ll be at your Davie property, you’ll see us coming. That’s the Relay Standard: book in a tap, live arrival time, before-and-after photos, a written price, and a digital invoice you can pay from a link. No four-hour windows. No voicemail maze. A real person answers the phone 24/7 at (754) 354-1396.
Sean Mackey leads our South Florida window and door operation, and he set one rule from day one: no vague quoting. Every Davie job gets a fixed written price. If the work isn’t right, the 365-Day Done Right Promise covers it, parts and labor, in writing, for a full year.
Picture Window in Davie
A picture window in Davie is a fixed, non-operable pane built to maximize your view and daylight, and it costs $800 – $2,200 installed depending on size, glass package, and whether the existing opening needs reframing or just a clean retrofit. These are popular on Davie’s larger lots where homeowners want to frame a pasture view, a pool, or a landscaped backyard without the visual interruption of window sashes. Many of the 1980s ranch homes we work on have narrow aluminum-frame windows, and opening up a wall for a picture window changes the room.
Framing the opening on older ranch homes
When we cut a larger rough opening into a 1980s ranch, we check what’s above it. Load-bearing headers in older Davie homes were sometimes sized to bare minimum code, so enlarging the opening can mean replacing the header. We scope that before quoting, not after we open the wall.
Glass packages and heat gain on west-facing walls
Davie’s subtropical sun is relentless on west-facing walls. For picture windows, we typically recommend low-E laminated glass with a solar heat gain coefficient tuned for south Florida. It cuts cooling loads without dimming the view. Expect the laminated option to add roughly $300 – $600 per window.
Bay Window Installation in Davie
Bay window installation in Davie runs $2,400 – $6,800 and creates a three-dimensional projection from the exterior wall, usually with a center picture window flanked by venting casements or double hungs. On Davie’s larger ranch homes, bay windows are a common upgrade for living rooms and breakfast nooks where homeowners want more floor space and a wider sightline to the yard. They’re also one of the more structurally involved installations we do, because the projection needs support from below and proper flashing above.
Structural support and roof considerations
A bay window in Davie needs a knee brace or cable support system, and if the projection extends beyond the eave line, it needs its own roof cap. On homes with shallow eaves, we factor that in. The framing and support work typically adds $600 – $1,200 to the base window cost.
County permits and setback rules on acreage
On Davie’s large-lot properties, a bay window projection changes the footprint of the home. Broward County reviews the projection against setback requirements to the septic drain field and property line. We pull the permit, we handle the review, and we won’t quote a bay window without checking the county’s setback map first.
Trusted Brands We Service in Davie
We stock and install PGT, CGI, and ES Windows products for Davie customers. PGT’s HVHZ-rated impact lines are the workhorse for hurricane code compliance here, and CGI gives us a higher-end option with exceptionally clean sightlines for homeowners who want minimal framing and maximum glass. ES Windows rounds it out for larger custom builds and modern designs. Because we’re local to South Florida, we have direct access to replacement parts and warranty support for all three brands, which means faster turnaround when a Davie customer needs a sash, a screen, or a hardware swap. You’re not waiting on a parts shipment from out of state.
Common Window Installation Problems We See in Davie Homes
- County permit misses on wind-borne debris zones. Davie has multiple wind-borne debris regions, and installing impact windows with the wrong rating means a failed final inspection. We verify the specific zone on every job before we order glass.
- Non-standard rough openings in pre-1992 homes. Many of Davie’s original windows were set into frames a modern window doesn’t match. We shim, we custom-order, or we reframe – whatever the opening needs, we scope it before quoting.
- Equestrian lot access problems. Long, unpaved, rutted driveways on Davie’s horse properties can block a boom lift from reaching a second-story gable end. We send a site lead out first to confirm equipment access before we schedule the install day.
- Setback violations near wells and septic systems. Framing or enlarging a window opening too close to a well head or drain field is a genuine Broward County code violation. We check setback distances as part of every quote.
Information Gain: On Davie’s large-lot properties, windows and doors are typically permitted through Broward County rather than the Town of Davie, and many homes run on wells and septic systems. That creates setback requirements most installers never think to check until the inspector flags it. We check it before we quote.
Pricing for Window Installation in Davie, FL
Here are the honest numbers for Davie’s market. A single or double hung replacement window runs $600 – $1,400 per opening. Horizontal roller windows land between $700 and $1,600. Casement windows cost $900 – $2,200, and awnings and hoppers are $550 – $1,100. Picture windows run $800 – $2,200, bay and bow windows $2,400 – $6,800, and garden windows $1,500 – $3,500. These ranges assume a standard retrofit into an existing opening. Reframing, structural header work, setback corrections, and upgraded glass packages add cost, and we’ll show you exactly what you’re paying for in a line-item written quote. Call (754) 354-1396 and we’ll price your specific windows. Estimates are free.
What moves the number on a Davie job? Acreage properties with long material hauls and equipment access challenges will run higher on labor because we’re slower to get materials on site. Older ranches with non-standard rough openings need custom shim work or reframing. And any time we’re cutting new openings, the Broward County permit review for septic and well setbacks adds time and cost. We explain all of this in the quote so there are zero surprises on the invoice.
We serve all of Davie, including the neighborhoods off Shotgun Road, the communities near Pine Island Ridge, and the western equestrian lots out toward the Everglades. Dispatch and scheduling are coordinated from our South Florida metro office, and our crews work Davie jobs locally.
We Also Serve Cities Near Davie
Our window installation crews cover Davie and the surrounding communities, including Fort Lauderdale, Oakland Park, Tamarac, and Coconut Creek. If you’re just over the Davie line in one of those cities, the same written pricing and 365-Day Done Right Promise apply. Call (754) 354-1396 and we’ll get your estimate scheduled.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Davie
Yes. Most large-lot Davie properties fall under Broward County permitting jurisdiction, not Town of Davie permitting, and window and door replacements that change the opening size or the structural framing require a county permit. The scope changes in a few ways: we have to verify the wind-borne debris region for the specific address, confirm the HVHZ large-missile rating if required, and check the new opening’s setback from any septic drain field or well head on the property. We handle the permit application, the review, and the inspection coordination as part of the job. Call (754) 354-1396 and we’ll check your address against the county’s records before quoting.
In most cases, yes. Older Davie ranches often have rough openings that aren’t square or come in odd dimensions like 47-3/4 inches wide, and standard impact windows won’t drop in without adjustment. We shim the opening and custom-order the window to the actual rough opening size whenever possible. If the framing is rotted or the opening is too far out of square, we reframe the opening, which adds $400 – $1,200 depending on the wall. We’ll tell you which path applies before you sign anything. Call (754) 354-1396 for a no-cost opening assessment.
If you’re replacing windows on a detached garage, shop, or ADU in Davie, the answer depends on how the county classifies the structure. Detached accessory buildings under 1,000 square feet and not used for habitation typically fall under different wind load requirements, but if the outbuilding has living space, it’s usually held to the same HVHZ standard as the main house. We verify the structure’s classification on the county permit before we order glass. Call (754) 354-1396 and we’ll walk you through what your specific outbuilding needs.
Flat, open lots in Davie collect water differently than sloped lots, and that affects how we flash and seal window openings. If water pools near the foundation after heavy afternoon thunderstorms, a window set too low without proper pan flashing will eventually leak, even with impact glass in the opening. On low-sill windows and garden windows, we build up the rough opening sill with a sloped pan and backer rod before setting the frame. This is the kind of detail we adjust for on every Davie quote, and it’s why we inspect the lot drainage before we finalize the price.
Yes, most Florida homeowners carriers offer wind mitigation credits for impact-rated windows, and some offer additional discounts for HVHZ-rated protection on homes inside a wind-borne debris region. You’ll need a copy of the permit, the product approval numbers from the manufacturer, and after installation, a completed wind mitigation inspection. We provide the permit and product documentation as part of any impact window install in Davie, so you have the paperwork your insurer requires. Call (754) 354-1396 and we’ll tell you which documentation package applies to your job before we start.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Davie and South Florida.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.