New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
VLX 100 Bifold / Folding Door in Fort Lauderdale, FL | Juniper Windows Fort Lauderdale
The VLX 100 bifold door is an accordion-style aluminum system that folds panel-by-panel to open an entire wall. In Fort Lauderdale, where outdoor living is year-round, that wall-to-wall opening changes how a home breathes. You get a dining room that flows onto a patio, a living room that opens to the pool deck, a kitchen that shares light with the backyard. Juniper Windows Fort Lauderdale is an authorized ViewLux installation partner, which means you’re buying the product and the install from one accountable local team. Call (754) 354-1396 to talk through your opening size, glass package, and a rough price for your home in Fort Lauderdale.
Product Overview – VLX 100 Bifold / Folding Door
The VLX 100 is built around one idea: when the panels fold away, the wall should disappear. Panels stack neatly to one or both sides, so the threshold between inside and outside becomes a step rather than a barrier. That’s the accordion-style aluminum bifold concept, executed with tighter tolerances than what you’ll find on budget folding doors sold through big-box channels.
Aluminum is the right material for Fort Lauderdale. It doesn’t warp in humidity the way wood can, and it doesn’t swell after a summer of afternoon storms. The slim 2.56-inch profile width keeps sightlines open, so even with the door closed you’re looking at glass, not frame. We see this series specified most often in mid-century ranch homes in Sailboat Bend, new construction in Tarpon River, and condo remodels along Galt Ocean Mile where owners want a stronger connection to a balcony or terrace.
Buyers choose the VLX 100 over sliding glass doors when they want a wider clear opening. A slider always leaves half the glass fixed. A bifold clears the full span. For a 20-foot wall, that’s the difference between a doorway and a missing wall. The engineering under the surface, multi-point locking, stainless steel rollers, reinforced corner keys, is what keeps a 20-foot system operating smoothly in a coastal climate.
Technical Specifications
Here’s what the VLX 100 brings in raw numbers, translated from the spec sheet into plain language. Panel count drives the folded stack depth, so a 6-panel configuration on a wide opening leaves more of the frame visible than a 2-panel setup on a modest wall.
- Profile width: 2.56 inches per panel stile, slim enough to keep the focus on glass.
- Wall thickness: 0.098-inch aluminum extrusion, stiff enough for wide spans without sagging.
- Maximum span: Up to 20 feet wide per unit, with the panel count rising to match the opening.
- Track configurations: 2-Panel, 3-Panel, 4-Panel, 5-Panel, or 6-Panel systems.
- Glass options: Clear, Low-E, Tempered, Laminated, Gray Tint, or Black Tint.
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, or Teak Wood.
- Screen option: Retractable screen available, or no screen for a completely clean opening.
Performance Features
Thermal Efficiency – The VLX 100 uses thermal break technology, which separates the interior and exterior aluminum faces to slow heat transfer. In an NFRC-rated comparison, this is the difference between a frame that bakes in the Fort Lauderdale afternoon sun and one that stays neutral to the touch. Pair with Low-E glass for the strongest solar control. Call (754) 354-1396 and we’ll walk you through NFRC ratings for each glass package.
Acoustic Performance – Laminated glass adds real sound reduction, which matters if you live near Federal Highway, I-95, or the FLL flight path. The interlayer in laminated glass interrupts sound transmission far better than standard clear glass. Combined with the compression gaskets on a properly sealed aluminum frame, the VLX 100 quiets a room noticeably.
Airtightness & Weather Seal – The system is designed for airtight operation when closed. Gaskets meet at the panel joints, the floor track seats firmly, and the locking hardware compresses the panels together. That seal matters in Fort Lauderdale, where air-conditioned interior air escaping through a loose door is a year-round energy drain.
Waterproofing – The perimeter installation uses AAMA 812 low-expansion foam sealant on all joints, the standard for keeping wind-driven rain from finding a path around the frame. Fort Lauderdale gets sideways rain in summer squalls. A foam-sealed perimeter plus a properly sloped sill is what keeps water outside where it belongs.
Wind Resistance – The unit is wind-load rated for local climate requirements, and the impact-resistant laminated glass option is available when you need a door built for hurricane season. Your specific exposure zone determines whether impact glass is required or recommended. We’ll check your Fort Lauderdale location against current code before you commit.
Security & Hardware – Multi-point locking engages at multiple points along the panel run, not just a single latch in the middle. Stainless steel rollers on the bottom track keep a heavy stack gliding smoothly. The hardware is designed for thousands of open-close cycles, which a 6-panel door on a busy pool deck will see within a few years.
Color & Glass Options
Six finishes cover most architectural directions. Premium Black reads contemporary and sharp, especially on white stucco homes in Victoria Park. Pure White disappears into light interiors. Anodized Silver has an industrial, clean look that suits coastal-modern builds. Bronze and Champagne bring warmth without going full wood. Teak Wood gives you the warmth of timber without the maintenance, ideal if your Fort Lauderdale home leans traditional or tropical.
Glass choice drives how the room feels. Clear glass maximizes visible light and is the default choice for shaded east-facing walls. Low-E is the workhorse: it cuts solar heat gain and protects interiors from UV fading, which matters in a city with 246 sunny days a year. Tempered glass is safety-rated and required by code in many door applications. Laminated glass adds impact resistance and sound control, the right call for homes facing open water or busy streets. Gray Tint and Black Tint add privacy and glare control for west-facing openings that catch harsh afternoon sun.
Installation by Juniper Windows Fort Lauderdale in Fort Lauderdale
A bifold door lives or dies by the quality of its install. A 20-foot track that’s off-level by a quarter inch will bind. Panels that aren’t plumb will drift. Poor perimeter sealing invites water intrusion, and here’s the part most homeowners don’t realize until it’s too late: improper installation voids the manufacturer warranty. ViewLux warrants the product when it’s installed correctly. Juniper Windows Fort Lauderdale installs to AAMA 2400/2410 standards so the warranty stays intact.
Our process starts before the order is placed. We measure the opening, check the header for load, and confirm the floor slab is flat enough for a long track. In Fort Lauderdale, older homes in areas like Riverside Park and Croissant Park often have settled slabs and slightly out-of-square openings. We account for that before you sign anything.
On install day, the frame is set level, plumb, and square, which is the non-negotiable foundation for smooth panel operation. We seal the entire perimeter with AAMA 812 low-expansion foam sealant, then run a water test before finishing the interior trim. We pull any required permits, and if your Fort Lauderdale project needs impact-rated glass to meet code, we handle that documentation. You get one team from measurement to final cleanup, not a product shipped to a subcontractor who has never opened a ViewLux box.
Frequently Asked Questions – VLX 100 Bifold / Folding Door
Most VLX 100 orders in Fort Lauderdale run 4 to 6 weeks from final measurement to delivery at our warehouse, depending on the glass package and finish. Custom powder-coat colors on large multi-panel configurations can add time. The best way to lock in an accurate schedule is to have us measure first. Call (754) 354-1396 to get on the calendar.
Eligibility depends on the glass package and the final NFRC-rated performance values for your specific configuration. Low-E glass options can push the unit into qualifying territory under current federal efficiency standards, but we’ll verify the ratings for your exact panel size and glass choice before you order. We’d rather give you a real answer than a blanket promise.
The manufacturer warranty covers the aluminum frame and hardware against defects when the door is installed correctly. Correct matters. A DIY or handyman install that ignores AAMA standards voids the coverage. Juniper Windows Fort Lauderdale installs to the manufacturer’s required standard, so your warranty stays valid. We’ll walk you through the exact terms for your specific configuration.
Yes, within the system’s structural limits. The maximum span is 20 feet wide, but panel count, panel width, and height all flex to fit your opening. That said, a 20-foot opening on a residential wall in Fort Lauderdale usually requires a structural header check first. We confirm the engineering before you order, not after.
Aluminum frames need a rinse, not a refinish. Wash the tracks with mild soap and water a few times a year to keep sand and salt spray from building up, especially if you’re near the beach in Fort Lauderdale. The rollers are sealed stainless steel and don’t require lubrication. If a panel ever feels stiff, call us before you force it. Forcing a misaligned panel is how tracks get damaged. Call (754) 354-1396 and we’ll get eyes on it.
Get a Quote – VLX 100 Bifold / Folding Door in Fort Lauderdale
The fastest way to get a real number is to let us measure the actual opening. We’ll bring finish samples, glass options, and a written line-item quote to your home in Fort Lauderdale, no pressure and no change orders later. Call (754) 354-1396 to schedule your free on-site measurement and see what the VLX 100 costs for your space.
Written by the team at Juniper Windows Fort Lauderdale, your authorized ViewLux partner serving Fort Lauderdale, FL.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Juniper Windows Fort Lauderdale Services
What Neighbors Say About Juniper Windows Fort Lauderdale
Detailed Images
