New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ViewLux Sliding & Patio Doors: The Fort Lauderdale Owner’s Guide
If your ViewLux sliding or patio door is sticking, leaking, or refusing to lock, we stock and install ViewLux-compatible rollers, handles, locks, and weatherstripping, and we service Fort Lauderdale homes every week. A typical parts-and-labor repair runs between $180 and $450 depending on the part and how many panels are involved. Most owners discover the failure the same way: a door that used to glide with one hand now takes a shoulder, or a lock that no longer catches without a fight. That’s the door telling you something specific is worn out, not the whole frame.
Which ViewLux Models This Applies To
ViewLux sliding and patio doors in Fort Lauderdale homes typically fall into a few recognizable series, and the parts aren’t always interchangeable between them. The best way to identify what you need is to look for the manufacturer’s label on the door’s edge or top rail – it usually carries the series name and the glass spec. If the label is faded from years of Florida sun, measure the roller housing width and the wheel diameter. That’s the number that matters most. ViewLux rollers come in several housing widths, and a roller that’s off by an eighth of an inch will bind or drop the panel. We’ve seen doors where a well-meaning owner ordered a generic roller and ended up with a door that rode rough and wore the track unevenly. For ViewLux specifically, OEM parts are the right call when the door is still under warranty or when the part is unique to the series – like a multi-point lock or a specific handle set. For rollers and weatherstripping, quality aftermarket equivalents with the same dimensions work well and often cost less. We’ll tell you which is which before you spend a dollar.
Signs Your ViewLux Sliding & Patio Doors Is Failing
- Hard rolling or a grinding sound. The roller bearings have worn flat or the wheels have developed flat spots. In Fort Lauderdale, salt air accelerates this. If the door rolls fine for a foot and then drags, it’s almost always a roller, not the track.
- The door drops or scrapes the track. When a roller housing fails or the adjustment screw strips, the panel settles. You’ll see scrapes on the track or feel a bump as the door crosses the threshold. Left alone, it chews up the bottom rail.
- The lock won’t engage or the handle flops loose. ViewLux multi-point locks rely on alignment. If the door has shifted even slightly, the bolts miss the keepers. A loose handle is usually a broken internal spring or a stripped set screw.
- Air, water, or daylight visible around the panels. Weatherstripping on a sliding door compresses over time, and in coastal humidity it can also grow brittle or mold. If you can see daylight at the meeting stile, the seal is gone.
- The door slides open on its own or creeps closed. A door that won’t hold position is out of plumb, which means rollers, track, or both. That’s a sign the door has been working against itself for a while.
Replacement Cost & What’s Included
For Fort Lauderdale homes, here’s what ViewLux sliding and patio door parts typically run installed.
- Roller replacement (per panel): $180 – $280
- Handle or lock set replacement: $160 – $300
- Weatherstripping replacement (full door): $140 – $260
- Track straightening or repair: $220 – $450
- Full hardware refresh (rollers, handle, weatherstripping): $400 – $650
The range depends on whether you have a two-panel slider or a four-panel configuration, and whether the part is OEM or a quality aftermarket match. Every job gets a written price before we start, and the number we quote is the number you pay – no change orders for a roller that fought us or a screw that sheared in the housing. Our work is covered by the 365-Day Done Right Promise, which means parts and labor, in writing, for a full year. If a part fails within that window, Sean Mackey and the crew are back at no charge.
DIY or Call Us?
Here’s the honest split. You can safely check a few things: whether the track is packed with sand or debris, whether the door is visibly sitting low on one end, and whether the handle screws are just loose. If it’s debris, a shop vac and a wipe-down cost nothing and might solve the problem. What you shouldn’t do is pull the panel without help. A sliding glass panel is heavy, and once a roller lets go, the panel drops fast. We’ve had calls in Fort Lauderdale where a homeowner tried to replace a roller solo and ended up with cracked glass and a bent track – that $40 part became an $800 morning. If the door rides rough, locks badly, or leaks, call (754) 354-1396. We’ll diagnose it, hand you a written number, and have it rolling right.
FAQs
In coastal South Florida, expect four to seven years from a set of rollers before salt air, humidity, and daily use take their toll. Doors facing the ocean side or a pool deck tend to wear at the shorter end of that range.
If your door is older than that and rolling rough, it’s not a maintenance issue – the rollers are done. Call (754) 354-1396 and we’ll price it in writing.
In most cases, yes. If the frame is square, the glass is intact, and the track isn’t deeply gouged, hardware replacement fixes it. Full door replacement only makes sense when the frame has rotted, the glass is compromised, or the door no longer meets code.
We’ll tell you straight which situation you’re in. Estimates are free – call (754) 354-1396.
Most single-panel roller replacements take 45 to 90 minutes on site. A full hardware refresh – rollers, handle, and weatherstripping on two panels – usually runs two to three hours. We’ll give you a timeframe in writing along with the price.
We keep common ViewLux roller sizes, handle sets, and weatherstripping profiles on the truck, so most Fort Lauderdale jobs are one visit. For unusual series or multi-point lock components, we source OEM parts direct, which typically adds a few days.
We also service and source parts for PGT, CGI, and CWS doors when a home has mixed brands. Call (754) 354-1396 and we’ll match what you need.
Written by Sean Mackey, Owner, Juniper Windows & Doors – Fort Lauderdale at Juniper Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.