New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Installation: The Fort Lauderdale Owner’s Guide
Mr-Glass door installation in Fort Lauderdale typically runs $340 to $780 installed, depending on whether we’re replacing a single glass panel, a full glass assembly, or re-hanging and reseating the door itself. We stock Mr-Glass-compatible hardware and glass on our trucks, and most jobs wrap up the same day we arrive. The usual discovery point is a door that suddenly scrapes the frame, a glass panel that’s foggy inside, or a door that won’t stay latched after a storm pushed it out of square.
Key Takeaways
- Installed Mr-Glass door installation in Fort Lauderdale: $340 – $780 for most residential jobs
- We stock Mr-Glass-compatible rollers, hinges, glass panels, and weather seals on the truck
- Written price before any work starts, every time, no exceptions
- 365-Day Done Right Promise covers the installation, parts and labor, in writing
- Call (754) 354-1396 for a free estimate on your Mr-Glass door
Which Mr-Glass Models This Applies To
We work on Mr-Glass doors across the residential lines most common in Fort Lauderdale: hinged glass inserts for entry doors, full-lite glass doors with low-E or impact-rated lites, and the decorative glass panels Mr-Glass builds for front entry systems and side lites. If you look at the door’s edge or one of the lower glass corners, you’ll usually find a small etched label with the model prefix, glass type, and sometimes a date code. That label saves us time matching the right panel specs, especially for impact-rated glass where the lite thickness and laminate count matter.
Here’s the compatibility gotcha that trips people up: Mr-Glass decorative door lites are built in two standard thicknesses, 1/2″ and 7/8″ insulated glass units. The 7/8″ units are almost always part of an impact-rated assembly, and you can’t drop a standard 1/2″ panel into that frame without rebuilding the stop and losing the rating. If you snap a photo of the label and text it to us before we roll out, we can usually tell you on the spot whether we have the right panel on the truck or need one day to pull the match. For OEM versus aftermarket, our position is simple: when Mr-Glass glass is available at a sane lead time, we use it. When a lite is discontinued or backordered, we have a Fort Lauderdale glass fabricator we’ve used for years who cuts replacement units to the same thickness, tint, and low-E spec, and we tell you which path we’re quoting before you commit to anything.
We are an independent service provider; we’re not affiliated with Mr-Glass. We stock and install their products because Fort Lauderdale homes have a lot of them, and we know how they wear.
Signs Your Mr-Glass Door Installation Is Failing
- Condensation or fog between the glass panes. The seal on the insulated glass unit has failed. South Florida humidity gets inside the air gap, and no amount of cleaning fixes it from the outside. The fix is a replacement lite, not a repair.
- Scraping or dragging along the threshold. Fort Lauderdale’s heat and moisture cycles cause door slabs to shift within their frames, especially on west-facing doors that take direct afternoon sun. If the hinges are still tight, the slab usually needs re-setting in the frame, or the hinges have worn enough to need replacement.
- Door won’t stay latched, or the deadbolt misses the strike plate. The frame has moved out of square, or the door slab has sagged. This is a re-hang and re-shim job, and it’s the one repair where catching it early saves the most money.
- Visible cracks around the glass edges in the frame. This is common after hurricane-season wind loads have worked the frame joints. If the glass itself is cracked, the lite is compromised; if it’s just the surrounding trim, we can repair it without touching the glass.
- Air or water intrusion around the door when it rains. The weather seals and sill cap have compressed or cracked. In Fort Lauderdale this shows up fast because a single afternoon storm will push water horizontally against the door with real force.
Replacement Cost & What’s Included
In Fort Lauderdale, here’s what we quote, and every number includes the part and the labor:
- Single decorative glass lite replacement: $340 – $520 installed, depending on glass size and whether the existing frame stop can be reused
- Full-lite impact-rated glass panel replacement: $520 – $780 installed; the higher end covers thicker laminated units and re-bedding the panel with fresh sealant
- Door re-hang and hinge replacement: $280 – $450 installed, including resetting the frame if shims have shifted
- Threshold and weather-seal replacement: $190 – $320 installed
The range comes down to glass type, lite size, and whether the frame needs any correction before the new part goes in. Every quote is a written, line-item price before any work starts, and it stays that number unless you add scope. The installation itself is covered by our 365-Day Done Right Promise: if the work isn’t right, we make it right, parts and labor, in writing, for a full year. If something we fixed fails within that year, the second visit is free.
DIY or Call Us?
Door glass work is not a beginner’s project. The lites on most Mr-Glass entry doors sit under continuous pressure from the retaining stops and, on impact-rated units, the entire assembly is load-bearing for the door’s wind rating. One wrong cut when setting a new lite and you’re looking at a cracked $300 panel; one missed shim and the door binds against the frame by summer. This is not garage-door-spring dangerous, but it’s also not a caulk-and-touch-up job. What an owner can do safely: check whether the lite label matches the frame, tighten visible hinge screws, clean and inspect the existing weather seals, and send us photos. What you shouldn’t do: pull a lite out of an impact-rated frame yourself, because the stop channels on those units are normally sized for the original glass and forcing a panel back in can crack the corners.
If your Mr-Glass door is fogging, sagging, or leaking in Fort Lauderdale, the fastest path to a real answer is a call to (754) 354-1396. We’ll tell you honestly whether we can fix it, what the part will cost, and when we can put it on the schedule. Sean Mackey and the crew have re-set and re-glassed a lot of these doors across Fort Lauderdale, from older homes off Las Olas to newer construction in Flagler Village, and the fix usually takes less time than the drive to the hardware store.
FAQs
Expect 10 to 15 years from the sealed glass unit before you see fogging. Salt air, direct sun, and the humidity cycle all work the seal from day one, so coastal Fort Lauderdale homes usually land at the shorter end of that range. Call (754) 354-1396 for an exact quote on yours.
No. The seal inside the insulated glass unit has failed, and the fix is a new lite cut to the same thickness and spec. We match the original glass and quote the replacement before any work starts.
Most single-lite replacements and re-hangs take an hour to an hour and a half from the time we arrive. Full-frame resets with new seals run closer to two hours. You’ll have a written price and a live arrival time before we pull up.
We stock the most common Fort Lauderdale residential Mr-Glass lite sizes, hinges, rollers, and weather seals on our trucks. If your lite is an odd size or a discontinued pattern, we pull the match from our local fabricator and install it the same week. Call (754) 354-1396 with your door’s label info and we’ll tell you what we’re bringing.
Written by Sean Mackey, Owner, Juniper Windows & Doors – Fort Lauderdale at Juniper Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.