New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Door Replacement in Fort Lauderdale: What to Know First
ECO Window Systems door replacement in Fort Lauderdale typically runs $1,200 to $4,800 depending on the door type, glass package, and frame condition, with most single-door replacements completed in one day. We’re an independent ECO Window Systems service provider, meaning we work on the brand every week but we’re not tied to the factory’s timeline or price book. If you own an ECO door that’s failing, fogged, or simply done fighting the Florida sun, this page tells you what actually happens next. Call us at (754) 354-1396 and we’ll walk you through it.
- Who this is for: Fort Lauderdale homeowners with an existing ECO Window Systems door that’s hard to open, leaking, rusting at the hinges, or showing glass seal failure.
- Turnaround reality: Most ECO door replacements are measured, ordered, and installed within 7 to 14 days. Custom sizing and impact packages can push that to 3 weeks.
- Price posture: You get a written line-item price before we touch anything. No door-day surprises. Ever.
How ECO Window Systems Products Fail – and How We Fix Them
ECO Window Systems builds a solid mid-range product, but Fort Lauderdale humidity, salt air, and daily thermal cycling expose weak points faster than anything the brochure mentions. Here’s what we actually see in the field.
- Roller and track wear on the 7800 Series sliding doors. The factory rollers on older 7800 sliding patio doors are plastic-wheeled, and after roughly 6 to 10 years of Fort Lauderdale humidity they flatten on one side. The door feels like it’s grinding, and homeowners assume the frame is bent. It’s almost always just the rollers. We swap in stainless steel replacements and the door glides again.
- Weep hole blockages on impact-rated ECO doors. This is a big one. ECO’s impact doors drain through small weep channels at the sill. Fort Lauderdale’s torrential summer rains plus blown sand and leaf debris clog those channels, and water backs up into the track and eventually the interior floor. We clean the channels, check the sill slope, and where needed, re-flash the rough opening so water never finds the door pan again.
- Glass seal failure in coastal homes east of US-1. ECO’s standard double-pane insulated glass carries a solid warranty, but the sealant degrades faster within a mile of the ocean. Once the seal goes, you get fogging and lost thermal performance. We handle seal-failed units as full panel replacements when the frame is still sound, which saves you money compared to replacing the whole door.
- Hinge sag on the TDL (True Divided Lite) entry doors. The TDL line uses real wood grilles and heavier glass, and we see hinge sag on units where the original installers used too few screws or skipped a third hinge. The door drags on the threshold, the deadbolt stops aligning, and the top corner starts letting air in. We re-hang with reinforced hinges and replace the threshold if the drag has worn it down.
- Handle set and multi-point lock failures on the 7000 Series hinged doors. The multi-point lock mechanism is a known weak spot after years of twice-daily use. The handle turns but the top or bottom pins don’t fully engage. Some contractors tell you to replace the entire door assembly. We can usually replace the gearbox and lock strip as a parts-level fix, which runs a few hundred dollars instead of a few thousand.
Our ECO Window Systems Door Replacement Process
Every ECO Window Systems job follows the same five steps, whether it’s a slider off a canal-front condo or an entry door in Victoria Park.
- 1
Phone diagnosis. Call (754) 354-1396. We ask about the door type, age, and symptom. By the end of the call, we’ll tell you whether we expect a repair or a full replacement, and what to budget.
- 2
On-site measurement and frame assessment. We inspect the door, the rough opening, the flashing, and the threshold. ECO doors are installed in a lot of different Fort Lauderdale buildings, and we need to see the actual opening before ordering anything.
- 3
Parts decision. We check whether an OEM ECO component or a quality aftermarket part makes more sense. For glass and structural parts we stay OEM whenever the warranty is still active. For rollers, handles, and locks, we use aftermarket parts that outperform the originals.
- 4
Written price, then install. You approve the line-item number before we order a single part. Installation happens on the scheduled day, with photo updates sent to your phone.
- 5
Test and handover. We cycle the door fully, check the seal, align the locks, and walk you through what was done. Every job is covered by our 365-Day Done Right Promise: parts and labor, in writing.
What ECO Window Systems Door Replacement Costs in Fort Lauderdale
Here are the numbers we quote most often, based on real Fort Lauderdale jobs. These are full replacement prices including labor, haul-away, and our 365-day warranty.
- Single hinged entry door, non-impact, standard size: $1,200 to $2,200
- Single hinged entry door, impact-rated glass: $2,000 to $3,800
- Sliding patio door, 2-panel, non-impact: $1,800 to $3,200
- Sliding patio door, 2-panel, impact-rated: $2,800 to $4,800
- Roller, hinge, or lock repair (no full replacement): $180 to $650
What moves the price most is the glass package. Impact-rated glass adds real cost, but in Fort Lauderdale it’s not just about hurricane code compliance. It’s also about daily security and a lower homeowners insurance bill. Frame color, custom sizing, and whether we’re working on a second-story unit also shift the number slightly. The quote we give you is the quote you pay. Call (754) 354-1396 and we’ll put a number on your exact door, free.
Why Fort Lauderdale Homeowners Call Juniper Windows Fort Lauderdale for ECO Window Systems Work
We’ve been at this since 2001, and Sean Mackey has spent enough years working doors in Broward County to know exactly what this climate does to a frame. The difference with our crew is the same thing our customers mention first: we show up when we say we will and the price doesn’t move. Every job starts with a written number. Every job ends with a walkthrough and your digital invoice.
We carry eight product lines, so when an ECO door is beyond saving, we’re not cornered into one brand. If PGT, CGI, CWS, or ES Windows makes a better fit for your opening and budget, we’ll tell you that straight. That’s the whole point of being independent. And while you’re making the call, know that the phone at (754) 354-1396 is answered by a live person, any hour. Not a queue. Not a callback.
FAQs
No. As an independent ECO Window Systems service provider, we replace doors and components without involving the factory, and we never do work that invalidates an active ECO warranty. If the door is still under factory coverage, we’ll tell you when it makes more sense to file a claim with ECO directly, and we’ll handle the paperwork with you. Our own work carries its own coverage: the 365-Day Done Right Promise, parts and labor, in writing. Call (754) 354-1396 and we’ll check your door’s status before anything else.
We source both. For rollers, lock mechanisms, hinge sets, and standard glass panels, we keep a local supply and can order direct from aftermarket manufacturers that meet or exceed the OEM spec. For custom-sized glass units or specialty frame components, we go through ECO’s distribution network. Either way, you never have to call the factory yourself. That’s our job. Call (754) 354-1396 with your door model and we’ll confirm parts availability within one business day.
Repair is the right call when the frame is square, the glass is clear, and the problem is a mechanical part like a roller, hinge, or lock. Once the frame itself is warped, the glass seal has failed, or the door has been leaking long enough to cause water damage to the subfloor, replacement is usually cheaper per year of service than repeated patch work. We’ll walk you through the math either way, and the written quote tells you exactly what each path costs. Call (754) 354-1396 for an honest read.
For a standard-sized replacement from local stock, we can usually install within 7 to 10 days of your estimate. Custom sizes and impact-rated configurations typically take 2 to 3 weeks from order to install. We’ll give you a live arrival time the day of the job, and you’ll get before-and-after photos sent to your phone. Call (754) 354-1396 to get on the schedule.
Yes. We install impact-rated ECO Window Systems doors that meet current Florida Building Code requirements for the High Velocity Hurricane Zone. That includes proper anchoring, the right glass package, and the paperwork you need for your insurance discount. If your current ECO door is not impact-rated and you want to upgrade, we’ll spec the right replacement without overselling you on features you don’t need. Call (754) 354-1396 and we’ll check what your home actually requires.
Written by Sean Mackey, Owner, Juniper Windows & Doors – Fort Lauderdale at Juniper Windows Fort Lauderdale, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.