New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
How Much Does Custom Window & Door Order Cost in Fort Lauderdale?
Custom window and door orders in Fort Lauderdale typically run between $850 and $3,400 per opening installed, with most homeowners paying $1,200 to $2,100 per window and $2,800 to $5,500 for an entry door system. The single biggest price driver is whether you need impact-rated glass, which nearly every coastal Fort Lauderdale home does under current Florida Building Code requirements. At Juniper Windows Fort Lauderdale, we write the full price on paper before any work starts, so the number you approve is the number you pay.
These figures reflect real 2026 market pricing across Broward County, from Victoria Park to Rio Vista to Coral Ridge, where labor, permitting, and product availability all shape the final invoice. This guide breaks down exactly where those dollars go, what pushes a quote higher or lower, and how to order without overpaying or underbuilding for hurricane season.
Key Takeaways: Custom Window & Door Order Pricing in Fort Lauderdale
- Custom windows: $850 to $3,400 per opening installed, with impact-rated glass adding 40% to 70% over standard insulated units.
- Custom doors: $1,900 to $5,500 for a single entry door system; $4,200 to $9,800 for a full door-and-sidelight configuration.
- Impact-rated glass is the new baseline: Fort Lauderdale sits in the High Velocity Hurricane Zone (HVHZ). Plan for it from the start.
- Permit costs range from $180 to $520 for window and door replacements in Fort Lauderdale, depending on the scope and whether structural modification is required.
- Turnaround: Custom orders take 6 to 14 weeks from sign-off to installation, depending on product line and factory load.
- Written pricing: Every Juniper Windows Fort Lauderdale job includes a fixed written price before work begins, backed by the 365-Day Done Right Promise.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what we’re currently quoting for custom window and door orders across Fort Lauderdale, from small retrofits in Tarpon River bungalows to full tear-out replacements in Harbor Beach and Las Olas Isles condos.
| Item | Typical Price Range (Installed) | What’s Included |
|---|---|---|
| Standard vinyl window, non-impact (apartment or inland retrofit) | $850 – $1,250 per window | Single or double hung, insulated glass, basic trim, haul-away |
| Impact-rated vinyl single hung | $1,200 – $1,850 per window | HVHZ-compliant laminated glass, aluminum or vinyl frame, standard sizes |
| Impact-rated aluminum casement or picture window | $1,600 – $2,400 per window | Laminated impact glass, powder-coated aluminum frame, low-E coating |
| Custom shape or oversized window (arch, circle, trapezoid) | $2,100 – $3,400 per window | Custom fabrication, impact-rated glass, reinforced framing |
| Impact-rated sliding glass door | $2,800 – $4,800 per door | Laminated glass, stainless steel rollers, multi-point locking |
| Entry door, impact-rated fiberglass or steel | $2,800 – $5,500 per door | Door slab, frame, hardware, weatherstripping, installation |
| Entry door with sidelights (one or both sides) | $4,200 – $9,800 per system | Custom frame, impact glass in door and sidelights, finish hardware |
| French door set, impact-rated | $4,500 – $8,200 per set | Two active leaves or one active plus fixed panel, full weatherseal |
| City of Fort Lauderdale building permit (window/door replacement) | $180 – $520 | Filed with the City Building Services Division |
These aren’t national averages. They’re what we actually see on Juniper Windows Fort Lauderdale quotes in 2026, shaped by local wage rates, product availability from our eight product lines (PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux), and Fort Lauderdale’s specific code environment.
What Drives Cost Up
- Impact-rated glass (the big one). Laminated glass with an interlayer that holds shattered glass in place under wind-borne debris. It adds 40% to 70% per unit compared to standard insulated glass.
- Second-story or difficult access. Installation on upper floors of Las Olas or Galt Ocean Mile condos requires lifts, scaffolding, or balcony work. Expect a $150 to $400 per-opening adder.
- Custom millwork or trim matching. Homes in Colee Hammock and Sailboat Bend with original 1920s casings often need custom reproduction trim, which runs $85 to $220 per window in materials alone.
- Frame material upgrades. Aluminum frames cost more than vinyl but hold up better to salt air. Expect a 25% to 40% premium.
- Old concrete or stucco repair. Fort Lauderdale’s humidity and salt exposure mean window openings often need re-flashing, stucco patching, or sill repair before new units go in. Budget $120 to $600 per opening when needed.
- High-end hardware or finishes. Matte black or coastal bronze hardware, multi-point locks, or custom door glass in Therma-Tru entry systems add $200 to $900 per door.
What Keeps Cost Down
- Standard sizes over custom shapes. A stock 36″ x 60″ impact window in a PGT or CWS line is always cheaper than a custom arch that requires a bespoke frame.
- Retrofit installation rather than full tear-out. When the existing rough opening is sound and square, retrofitting reduces labor and stucco repair by 20% to 35%.
- Grouping the project. Ordering 8 windows at once spreads trip fees, equipment setup, and permit work across more openings. We regularly see per-unit costs drop $80 to $180 on larger jobs.
- Off-season scheduling. Spring and early summer are the busiest months before hurricane season hits its peak. Scheduling between October and March can sometimes mean better factory lead times and installer availability.
What Affects Custom Window & Door Order Pricing in Fort Lauderdale
Fort Lauderdale isn’t like other Florida markets. The mix of coastal exposure, older housing stock, and a strict building code means pricing factors here differ from what a homeowner might hear in Orlando or Tampa.
1. High Velocity Hurricane Zone (HVHZ) Code Compliance
Fort Lauderdale sits squarely inside the HVHZ, the strictest wind-load zone in the United States. That means every window and door you order has to meet Miami-Dade County-approved product approval standards (or Florida Building Code equivalent). Impact-rated laminated glass isn’t an upgrade buyers consider. It’s the default. Product lines like CGI, PGT, and ES Windows are engineered specifically for this zone, and that engineering is reflected in the per-unit price. Expect $500 to $1,100 more per window compared to what a homeowner in Georgia or the Carolinas might pay for a comparable size.
2. Proximity to Salt Water
Homes within a mile of the Intracoastal or the ocean, in neighborhoods like Harbor Beach, Idlewyld, or the Galt Mile, face constant salt spray. Aluminum frames, stainless steel hardware, and corrosion-resistant finishes aren’t optional here. We routinely spec powder-coated aluminum with marine-grade fasteners for homes east of Federal Highway. That pushes material cost up 15% to 30% over vinyl frame alternatives.
3. Age and Condition of the Home
Fort Lauderdale’s housing stock spans from 1920s wood-frame cottages in Sailboat Bend to post-2000 concrete high-rises along the beach. Older homes almost always mean surprises at the rough opening: rotted sills, out-of-square frames, or termite damage in the trim. When those conditions appear, they’re addressed before the new window goes in, and that labor shows up on the invoice. On a 1920s home, we typically budget $200 to $500 per opening for repair work; on a 2000s concrete block home, that number often drops to near zero.
4. Product Line and Glass Package
Not all impact windows cost the same. A vinyl PGT single hung starts lower than an aluminum ES Windows casement with upgraded low-E glass and argon fill. The difference is real: a standard impact vinyl unit might run $1,200 per opening, while a premium aluminum picture window with tinted glass and a high-solar-gain low-E coating lands closer to $2,400. You’re choosing based on longevity, noise reduction, energy performance, and sightlines. We stock and order from eight product lines specifically so the window or door we recommend is the one that fits the job and the budget, not whatever a single distributor happens to have in the warehouse.
5. Permit and Inspection Fees
Fort Lauderdale requires a building permit for window and door replacement, and the city’s permit fees run from $180 to $520 depending on scope. Some jobs also require a product approval submittal or a Notice of Acceptance from the county. These are pass-through costs you’ll see itemized on any responsible quote. A contractor who quotes you a number without mention of permits is either planning to skip them (which complicates insurance claims later) or is burying the fee somewhere vague in the estimate.
6. Floor Level and Access
High-rise work along Las Olas, Galt Ocean Mile, or the New River corridor involves hoisting, safety rigging, and sometimes working from a swing stage or lift. Condo associations also add their own insurance and scheduling requirements on top of city permitting. A third-story window in a Galt Ocean Mile condo will cost $200 to $500 more per opening than the same window on a single-story home in Victoria Park.
How to Save on Custom Window & Door Order
Nobody wants to overpay for impact windows in Fort Lauderdale. But “saving money” on windows and doors here doesn’t mean buying the cheapest unit. It means spending on the right things and avoiding waste on the wrong ones.
Get the Permit Work Right the First Time
Skipping permits saves a few hundred dollars up front and creates real problems down the road: difficulty selling the home, denied insurance claims after a storm, and potential fines. The City of Fort Lauderdale is specific about product approvals and installation requirements. Paying for the permit and inspection once is cheaper than retroactively fixing an unpermitted installation. Every Juniper quote includes permit costs itemized in writing, so there’s no surprise line item when the job starts.
Bundle the Project
Replacing all the windows on one elevation or doing every window plus the entry door in a single project is more efficient than piecemeal ordering. One trip, one permit, one crew mobilization, one disposal run. On a whole-home order of 12 to 20 windows in Coral Ridge or Rio Vista, we typically see per-unit savings of 8% to 15% compared to ordering them four at a time.
Choose the Right Frame for the Right Spot
Not every opening needs marine-grade aluminum. Windows on the interior courtyard side of a home see less salt and sun than those on the ocean-facing elevation. We’ll spec differently for a north-facing window in Shady Banks than for an east-facing master suite window in Harbor Beach. Matching the frame to the exposure saves hundreds per opening without compromising the envelope.
Shop Product Lines, Not Just Prices
A quote from a contractor that only carries one window brand is a quote that’s already compromised. We keep access to eight product lines, from value-focused Mr-Glass units to premium ES Windows architectural casements, because different openings call for different engineering. Sometimes the most expensive line isn’t the best fit for a rental property in Middle River Terrace, and sometimes a cheap unit in a PGT line is exactly the right call for a rear utility window. Real savings come from fit, not from chasing the lowest sticker price. To get an exact written price for your home, call (754) 354-1396 and we’ll walk through the options. The estimate is free.
Plan Around the Factory Calendar
Custom window orders aren’t stock runs. Manufacturers run production on schedules, and lead times stretch in late spring when every coastal Florida contractor is ordering for pre-hurricane-season installs. Place your order in October or November and you’ll often see faster factory turnaround and more flexibility on install dates. That doesn’t change the per-unit price, but it can save you a month of waiting and let you avoid rush fees if you’re on a tight timeline.
Is It Cheaper to Repair or Replace?
Most Fort Lauderdale homeowners ask this question at some point. The honest answer: if your windows are 15 years old or older, or if they’re not impact-rated, replacement usually wins over repair on total cost of ownership. A repair like replacing a failed seal or a fogged insulated glass unit (IGU) runs $180 to $450 per window. That’s tempting against a $1,200 to $2,400 replacement. But a seal repair doesn’t add impact protection, doesn’t fix the underlying frame fatigue, and doesn’t lower your windstorm insurance premium the way new impact-rated windows do. In Fort Lauderdale, impact-rated windows can reduce windstorm insurance premiums by 15% to 40%, depending on the insurer and the home. We’ve had Harbor Beach and Coral Ridge clients whose premium savings alone covered 20% to 30% of the window project cost within three years. And once a frame starts to show water staining, silicone patch jobs stop working. At that point the question isn’t repair versus replace, it’s replace now versus replace after the next tropical storm.
Doors are different. A Therma-Tru entry door with a warped slab or worn weatherstripping can often be repaired for $250 to $600, especially if the frame is untouched. But if the door is hollow-core, pre-2000, or not rated for HVHZ wind pressure, a full replacement at $2,800 to $5,500 delivers more than cosmetics: it delivers structural benefit and code compliance. Call us at (754) 354-1396 and we’ll tell you straight what your door actually needs. No upsell, no vague answer.
Why Written Pricing Matters for Custom Window & Door Orders
Fort Lauderdale’s window and door market is crowded, and pricing practices are all over the map. We’ve seen homeowners bring us “estimates” from other contractors that were a single number with no product breakdown, no permit line, no glass package, and no installation scope. That’s a quote designed to be renegotiated later. Our standard at Juniper Windows Fort Lauderdale is different: every job gets a written price before a single screw turns. That price covers product, installation, permit, haul-away, and the labor to make it right. It’s governed by the 365-Day Done Right Promise: if the work isn’t right, we make it right, for a full year after installation, parts and labor, in writing. And the Relay Visibility Guarantee means you get a live arrival time you can track from your phone, before-and-after photos of the completed work, and a digital invoice you can settle from a link. No four-hour windows from a contractor who might or might not show. The booking and visibility experience is The Relay Standard, and it applies to every job we do from Dania Cut to Imperial Point.
Sean Mackey runs the custom window and door order business for Juniper Windows Fort Lauderdale. He’s been in the trade long enough to know that the cheapest quote is rarely the cheapest job. Every quote he writes includes the product brand, the glass package, the permit fee, the installation method, and the final number. If a homeowner asks for a ballpark, he gives them a spread in writing, not a shrug. There’s too much salt air, too much sun, and too much liability in Fort Lauderdale to treat custom window pricing like a guessing game.
Custom Window & Door Order Timeline and What It Costs Along the Way
Custom orders take time. Anyone selling you a “rush job” on a bespoke window order is either cutting corners or inflating the price. Here’s the realistic timeline for a custom order in Fort Lauderdale in 2026:
- Week 1: In-home measurement and product selection. This is when we confirm sizes, frame material, glass package, and hardware. Measurement errors are the single biggest source of custom order rework, so we measure twice and send photos before the order is submitted.
- Week 2: Permit application filed with the City of Fort Lauderdale. Product approvals and wind-load calculations are submitted at the same time. City review typically takes 5 to 15 business days for straightforward residential window and door replacements.
- Weeks 3 to 10: Factory production. PGT and CGI lead times are typically 6 to 10 weeks. Mr-Glass and ECO Window Systems can sometimes turn in 4 to 6. Therma-Tru door orders run 6 to 12 weeks depending on finish and glass options.
- Week 10 to 14: Permit approval in hand, product delivered, installation scheduled. Installation of 8 to 15 windows plus a door typically takes 2 to 4 days on a single-family home, depending on access and existing conditions.
- Week 14 to 15: City inspection. Once the inspector signs off, the job is complete and the 365-Day Done Right Promise starts.
Rush fees do exist in this industry when a factory expedites an order ahead of its production queue. We don’t push rush orders as a sales tactic. But if you’re on a tight timeline because you’re selling a home or closing on a purchase, ask us about current factory expedite availability and cost. We’ll quote the fee honestly or tell you it isn’t possible. Either way, you’ll know the number.
FAQs – Custom Window & Door Order Cost
How much does a custom impact window cost in Fort Lauderdale?
A custom impact window in Fort Lauderdale costs $1,200 to $3,400 per opening installed in 2026. Standard-sized impact vinyl units sit at the lower end of that range; custom shapes, oversized glazing, and architectural aluminum frames push toward the higher end. The price includes product, installation, permit, and haul-away when you work with Juniper. Call (754) 354-1396 for a written quote on your exact openings.
How much does a custom exterior door cost in Fort Lauderdale?
A custom impact-rated entry door in Fort Lauderdale runs $2,800 to $5,500 installed for a single door with frame and hardware. A door with sidelights or a custom glass package runs $4,200 to $9,800. We quote Therma-Tru, CGI, and other lines in writing before any order is placed.
Is it cheaper to repair or replace windows in Fort Lauderdale?
Seal repairs and IGU replacements run $180 to $450 per window, which is cheaper up front than a $1,200 to $2,400 replacement. But repairs don’t add impact protection, don’t lower insurance premiums, and don’t extend the life of a failing frame. On windows over 15 years old or any window that isn’t impact-rated, replacement is usually the better long-term value. Get a real number by calling (754) 354-1396.
Can you install custom windows and doors the same day in Fort Lauderdale?
No. Custom orders are built to order at the factory, so same-day installation isn’t possible. Standard stock windows can sometimes be installed same-week; custom sizes and impact-rated units typically take 6 to 14 weeks from order to installation. If you need an urgent quote or have an emergency opening to secure, call (754) 354-1396 and we’ll respond immediately.
What does a permit cost for window replacement in Fort Lauderdale?
Window and door replacement permits in Fort Lauderdale cost $180 to $520 depending on project scope and whether structural modifications are involved. The fee is a pass-through cost itemized on the written quote. We file all permits as part of the installation process.
How much can impact windows save on insurance in Fort Lauderdale?
Impact-rated windows can reduce windstorm insurance premiums by 15% to 40% in Fort Lauderdale, depending on the insurer, the home’s construction, and how much of the envelope is protected. Some Harbor Beach and Coral Ridge homeowners have seen savings that covered 20% to 30% of the project cost within three years. You’ll need the product approvals and permit records to claim the discount, which is one more reason to make sure the job is permitted properly.
Custom Window & Door Order in Fort Lauderdale: Bottom Line
You can order custom windows and doors in Fort Lauderdale for $850 to $3,400 per window and $2,800 to $5,500 per entry door installed in 2026, with the most common configurations landing in the $1,200 to $2,100 per window and $2,800 to $4,500 per door range. Impact-rated glass, HVHZ code compliance, and salt-air durability are baseline requirements here, not optional add-ons. The right approach is to lock a written price, plan for the factory lead time, and never accept a quote that doesn’t itemize product, permit, and installation in separate lines.
If you’re ready to get a firm written price for your custom window and door order in Fort Lauderdale, call Juniper Windows Fort Lauderdale at (754) 354-1396. A live person answers, the estimate is free, and the price you approve is the price on the invoice. Or check out our home page to see the full scope of what our team handles. Sean Mackey and the Juniper crew would rather show you a number than talk around one.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Fort Lauderdale since 2001 as part of the Relay Home Co. family.
Pricing reflects the Fort Lauderdale market as of 2026. Juniper Windows Fort Lauderdale offers free estimates – call (754) 354-1396.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Juniper Windows Fort Lauderdale Services
What Neighbors Say About Juniper Windows Fort Lauderdale
What Our Customers Say
"Window replacement upstairs and downstairs, both done in a day."
- Moe K."Booked the measure appointment online and got a text with the estimator's ETA. Replaced five windows two weeks later. Everything tracked in the app."
- Cora S."Foam insulated around the frames. Drafts are gone."
- Cindy P.