New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Wilton Manors
Window replacement in Wilton Manors has one non-negotiable requirement: the product must carry a Miami-Dade County Notice of Acceptance (NOA) rated for the High Velocity Hurricane Zone. Most full-frame replacements on the 1950s – 70s single-family homes here run $850 – $1,400 per opening for impact-rated vinyl or aluminum, depending on size and structural condition. Insert window replacement typically lands between $650 – $1,050 per window. Juniper Windows Fort Lauderdale serves Wilton Manors with written pricing before any work starts, background-checked crews, and direct scheduling at (754) 354-1396. We’re Sean Mackey’s team, and we’ve been installing Window Replacement products across South Florida since 2001.

Why Juniper Windows Fort Lauderdale Is Wilton Manors’s Preferred Window Replacement Company
Wilton Manors homeowners call us because we treat the HVHZ code as the floor, not the ceiling. Our crews know the difference between a product that is stamped impact-rated and one that carries a current Miami-Dade NOA for the exact design pressure the city’s inspectors enforce. That distinction matters when a permit inspection is scheduled and the window either passes or gets red-tagged.
Every Wilton Manors job works the same way. You get a written line-item price before a single screw turns, a live arrival time you can track from your phone, and before-and-after photos of the installation. Our technicians arrive in uniform, background-checked, and they do not subcontract the work out to a third crew you have never heard of. The 365-Day Done Right Promise covers parts and labor on completed installations for a full year, in writing. If something is not right, we make it right.
Sean Mackey has run our Fort Lauderdale operation with one standard: no vague estimates, no change orders appearing at the door, no surprises on the invoice. Wilton Manors is a tight community and word travels fast. That is why we answer the phone live, 24/7, and why our scheduling for Wilton Manors jobs typically gets you on the calendar within the same week.
Window Pane Replacement in Wilton Manors
Window Pane Replacement in Wilton Manors means swapping the glass unit only, keeping the existing frame, and it is the right call when a single pane is cracked, fogged, or failed but the surrounding frame is still square and stable. We see this constantly on the single-pane aluminum sliders that were original to homes built along NE 26th Street and the Middle River. Homeowners spot a stress crack after a storm or notice condensation trapped between panes, and they assume the whole window has to go. Often it does not.
Expect to pay $180 – $400 per pane for standard replacement in Wilton Manors, depending on glass type and whether the existing frame requires new glazing bead or gaskets. Impact-rated laminated glass pushes that range higher, typically $450 – $800 per pane, because the glass carries a Miami-Dade NOA and the frame must be verified to support the additional weight.
Single-Pane to Impact Glass Swaps
Many Wilton Manors homes still have original single-strength glass in aluminum frames from the 1960s. When that pane breaks, replacing it with plain annealed glass is legal but shortsighted. A pane swap to laminated impact glass delivers hurricane protection without the cost of a full-frame replacement. We verify the existing frame extrusion can accept the thicker laminated unit before we quote the job.
Fogged and Failed Insulated Units
Double-pane windows fail when the perimeter seal breaks and humid South Florida air gets between the glass. You see permanent fog or water spots that you cannot wipe off from either side. In Wilton Manors, this happens faster on east-facing elevations and canal-front homes because salt air accelerates seal degradation. A sash replacement or glass-only replacement restores the thermal barrier without disturbing your interior trim or paint.
Window Seal Repair in Wilton Manors
Window Seal Repair in Wilton Manors addresses the gaskets, glazing bead, and weatherstripping that keep wind-driven rain and salt air out of the frame. It is not a DIY caulk job. The gaskets on original 1960s aluminum windows harden and shrink, and once they go, water gets behind the frame and into the wall cavity. On canal-front homes along the Middle River, we also see metal jamb channels corroded to the point that the sash will not seat properly even with new seals.
Typical seal repair runs $120 – $300 per window in Wilton Manors when the frame is still serviceable. If the channel is corroded through or the frame is racked, seal repair is a band-aid and a full-frame replacement is the honest recommendation. We will tell you which one you actually need and put the price in writing either way.
Gasket and Weatherstripping Replacement
Older double-hung and awning windows in Wilton Manors rely on wool pile or vinyl weatherstripping that breaks down fast under UV exposure. Replacing it stops the rattle you hear during afternoon thunderstorms and cuts the air leakage that makes your AC work harder every month.
Seal Failure on Salt-Air Frontage
Homes within a half-mile of the Middle River or the Intracoastal have salt air working on hardware and seals every single day. We use marine-grade replacement gaskets and stainless fasteners on these jobs. Standard hardware goes in, pits within two years, and voids the manufacturer’s hurricane warranty.
Trusted Brands We Service in Wilton Manors
We install and service windows from PGT, CWS, ES Windows, and ECO Window Systems, plus doors from Therma-Tru and ViewLux. For Wilton Manors specifically, we keep CWS and PGT product lines well stocked, because both carry the Miami-Dade NOA paperwork and design-pressure ratings that local inspectors look for first. Parts for these brands turn around faster for our Wilton Manors customers because we do not have to special-order from a regional warehouse every time. If you already have a specific brand installed and need a matching replacement sash or pane, call us and we will tell you honestly whether the product still carries a current Florida Product Approval.

Common Window Replacement Problems We See in Wilton Manors Homes
- Original jalousie and awning windows that leak during summer downpours. Many homes along the Middle River still have these original units, and the cranks, gaskets, and glass are all at end of life. Replacement with modern impact-rated casements stops the leaks and quiets the constant boat traffic noise, especially in Middle River Manor and Westside Wilton Manors.
- Single-pane aluminum frames that rattle and whistle in high wind. These were standard in the 1950s – 70s construction boom here, and they flex under the +50/-60 psf design pressure the current code requires. A rattle is not cosmetic. It is the frame telling you it has already lost structural integrity.
- Condensation between double panes on canal-front homes. Salt air and humidity push seal failure earlier in Wilton Manors than in inland Broward cities. We regularly see failed insulated units on homes that are only 8 – 10 years old when they face the water.
- Rust and corrosion on window hardware near the water. The marine environment along the Middle River and the canals off NE 26th Street eats standard zinc hardware in a few seasons. Stainless replacement hardware and proper sealant selection are not upgrades here; they are the minimum for a job to last.
Pricing for Window Replacement in Wilton Manors, FL
Here is what we quote in Wilton Manors, on average: full-frame impact-rated vinyl replacement windows at $850 – $1,400 per opening, insert replacement windows at $650 – $1,050 per window, window pane replacement at $180 – $400 standard or $450 – $800 for impact glass, and window seal repair at $120 – $300 per window. Sliding glass doors run higher, typically $2,800 – $5,500 for impact-rated units with Miami-Dade NOA. Size, frame condition, and water-facing elevation all move these numbers. What does not move is the price once we put it in writing. The quote you approve is the price you pay, covered by the 365-Day Done Right Promise. Call (754) 354-1396 for your free estimate, and we will send a written breakdown the same day.
We Also Serve Cities Near Wilton Manors
Our crews cover all of central Broward, including Fort Lauderdale, Davie, Oakland Park, and Tamarac. If you are searching for Window Replacement near Wilton Manors, our Fort Lauderdale team handles scheduling and dispatch. Most Wilton Manors jobs get on the calendar within the same week, and every job carries the same written pricing and 365-Day Done Right Promise no matter which Broward city we are working in.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Wilton Manors
A replacement window in Wilton Manors must carry a current Miami-Dade County Notice of Acceptance (NOA) with a design pressure rating of at least +50/-60 psf for the HVHZ. There is no single statewide number; the NOA is product-specific, so a PGT WinGuard casement has a different NOA than a CWS unit. Your invoice should list the exact NOA for your window, and your permit inspection cannot pass without it. Call (754) 354-1396 and we will e-mail you the current NOAs for the products we quote.
Yes. Wilton Manors sits inside the HVHZ, and the Florida Building Code treats replacement windows as a structural component, not a finish item. The inspector will verify the new product carries a current NOA for +50/-60 psf, and in some cases they will check that the existing rough opening and framing can support the new unit before signing off. A contractor who cannot produce the NOA paperwork in advance is not ready to work in this city. Call (754) 354-1396 for an estimate that comes with the compliance documentation included, not extra.
Yes, in most cases the city still requires a permit when changing glazing in an existing frame, especially when the new glass is impact-rated and the opening is on a wind-bearing wall. If the frame is an original 1960s single-pane extrusion, our first step is to verify it can structurally accept laminated impact glass, and only then quote the permit and install. We file every permit for Wilton Manors jobs and we do not start work until the permit is in hand. Call (754) 354-1396 to confirm your specific opening before you buy glass.
A completed wind mitigation inspection that shows large-missile-rated glazing on every opening can reduce the windstorm portion of your premium substantially, often by hundreds of dollars a year in Wilton Manors. On one Middle River Manor home where we replaced original awning windows and a corroded sliding glass door, the owner’s annual windstorm premium dropped by over $400 after the updated inspection. We photograph every product label and NOA stamp on the finished install so you have the documentation your inspector needs.
Wilton Manors inspectors most often see PGT, CWS, and ES Windows on canal-front homes because these lines carry current Miami-Dade NOAs and hold up to salt air better than commodity vinyl. CWS and PGT are the two we stock and quote most frequently for water-facing properties in Wilton Manors. If a previous installer already put in a brand you want to keep, we can match sash replacements and panes to that product line. Call (754) 354-1396 and we will tell you which brands are the right fit for your specific elevation and exposure.
Permits, Inspections, and the HVHZ Code in Wilton Manors
Wilton Manors sits within the High Velocity Hurricane Zone as defined by the Florida Building Code. That is not a marketing phrase; it is a legal designation that changes what you are allowed to install. Replacement windows in Wilton Manors must carry a Miami-Dade County Notice of Acceptance showing a design pressure of at least +50/-60 psf. If you buy a product from a national line that is stamped impact-rated but lacks the Miami-Dade NOA, the Wilton Manors building official will reject the permit inspection, and you will be re-ordering windows at full cost. We have watched that happen to homeowners who tried to save a few hundred dollars on an out-of-state product.
A compliant quote in Wilton Manors includes more than glass and frames. It includes the permit application, the NOA documentation for every product, and an inspection that gets signed off after installation. A cheap quote often leaves out one of those three. Check the line items before you sign. If the permit fee, the product NOA, and the final inspection are not listed as separate items in writing, ask why. We include all of it because the city requires it, and because a job that cannot pass inspection is not a finished job.
On water-facing elevations in neighborhoods like Middle River Manor and the canals off NE 26th Street, we also treat the frames for salt-air exposure before the sashes go in. That is standard on our Wilton Manors installations. It is not an add-on line item and it should not be treated as an upgrade.
The Wilton Manors Difference: What Actually Shows Up on the Invoice
In the Middle River Manor neighborhood, our crew replaced original awning windows and a single-pane sliding glass door on a 1962 waterfront home. The metal jamb channels had corroded from decades of salt air, and the sashes rattled during afternoon storms. We installed PGT WinGuard casement windows with laminated glass interlayer and a CGI sliding door, all carrying Florida Product Approval for HVHZ. The owner’s wind mitigation inspection now shows large-missile-rated glazing on every opening, which cut their annual windstorm premium by over $400. That is the difference between a Wiconan-compliant Wilton Manors install and a window swap that just looks good in photos.
We will not run that kind of story as a sales pitch and then hand you a vague estimate. What you get from us is a written price, a documented permit path, and a product list with current Miami-Dade NOA numbers. For a free estimate in Wilton Manors, call (754) 354-1396 today.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Wilton Manors and central Broward County.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.