New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Lauderdale pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Wilton Manors
Window installation in Wilton Manors means meeting Miami-Dade County’s High-Velocity Hurricane Zone code, full stop. Most homes here were built between the 1950s and 1970s, long before modern wind-load standards existed, and they’re still carrying original jalousie or single-pane aluminum frames. We plan every Wilton Manors job around HVHZ compliance, from the Miami-Dade NOA on each window to the permit closeout your insurer wants to see. Call (754) 354-1396 for a written price before any work starts.
Why Juniper Windows Fort Lauderdale Is Wilton Manors’s Preferred Window Installation Company
We’re the Window Installation team Wilton Manors homeowners call when they want the permit pulled, the rating documented, and the job done without chasing a contractor for updates. Sean Mackey runs our Fort Lauderdale operation, and every Wilton Manors project gets a written price, a live arrival time you can track, and before-and-after photos. Our techs know the difference between a NOA requirement on NE 26th Drive and what flies in a non-HVHZ Broward city, because we work both sides of that line constantly.
When you book with us, you’re not leaving a voicemail and hoping. A live person answers the phone 24/7. Your quote comes in writing, with the exact window line, glass package, and wind-load rating called out. If anything isn’t right after installation, the 365-Day Done Right Promise covers parts and labor for a full year. That’s the standard for every Wilton Manors job we touch.
Picture Window in Wilton Manors
A picture window in Wilton Manors is usually the centerpiece of a mid-century living room facing the Middle River, and it’s also the largest single pane of glass on the house – which is why impact rating matters more than aesthetics. These fixed units don’t open, so the entire job is about the frame anchoring and the glass package. A typical picture window in Wilton Manors runs $900 – $2,400 installed, depending on width, frame material, and whether you need large-missile impact glass or standard insulated glass.
Impact-Rated Fixed Glass for Canal-Front Homes
Homes near the Middle River or the city’s canal fingers get hit with salt air and constant reflected sun. We spec picture windows there with laminated impact glass and corrosion-resistant frames, because a standard aluminum frame will start pitting within a few seasons. The payoff is a fixed window that holds a design pressure rating of ±60 psf and quiets boat traffic at the same time.
Replacing Original Jalousie Openings
Plenty of Wilton Manors ranches still have original jalousie windows, and when homeowners want a clear view without those glass slats rattling, a picture window is the natural fix. We reframe the opening to carry the new fixed unit properly – the old jalousie framing isn’t rated for anything close to current wind loads. This is a permit job in Wilton Manors, and we close it out with the NOA validation your insurer needs.
Bay Window Installation in Wilton Manors
Bay window installation in Wilton Manors is common on the 1960s and 1970s ranch homes that dominate neighborhoods east of Andrews Avenue, where a projecting bay turns a small living room into something with actual dimension. A three-panel bay window in Wilton Manors typically runs $3,200 – $6,800, including framing, support, glass, and finish work. The support structure matters as much as the glass here, because a bay window has to carry its own weight plus wind pressure across three separate faces.
Structural Support and Cantilever Framing
A quality bay window install in Wilton Manors starts below the sill. We build the support knee and cantilever framing to handle the projection, then anchor the unit to the home’s structure, not just the rough opening. If a quote doesn’t mention framing support or permit drawings, walk away – a bay window that sags in a Wilton Manors home is a code failure waiting to happen.
Impact Glazing Across All Three Panels
A bay window has three wind-facing surfaces, so all three panels need the same impact rating. We spec PGT or CGI impact-rated glass across every face of the bay, with matching NOA stickers on each sash. For Wilton Manors homeowners, that’s the difference between a window that protects the whole opening and one that leaves the side panels vulnerable to wind-borne debris.
Trusted Brands We Service in Wilton Manors
We install and service Window Installation in Wilton Manors with a focused set of impact-rated lines: PGT, CGI, and ES Windows. We chose those brands because they hold current Miami-Dade NOAs and stand up to salt air, direct sun, and the wind loads Wilton Manors homes actually face each season. If you need a specific brand matched to an existing window or an HOA requirement, we can usually get the exact product without the long lead times homeowners keep hearing about from big-box retailers.
Common Window Installation Problems We See in Wilton Manors Homes
- Impact glass installed without a permit. The window may look fine, but without a Wilton Manors permit and Miami-Dade NOA validation, there’s nothing on record proving the installation meets HVHZ code. Your insurer can deny windstorm credits, and a post-installation wind mitigation inspection won’t pass.
- Non-HVHZ-rated frames on canal-front homes. Aluminum frames that aren’t rated for the coastal environment corrode within a few years near the Middle River, especially where the jambs meet salt-laden moisture. Failed seals and stuck sashes follow quickly.
- Original jalousie and single-pane aluminum left in place. These windows perform terribly in high winds and heat, and many have frame gaps that show up as failed wind mitigation inspections. They’re also loud – boat traffic and Wilton Drive activity carry straight through single-pane glass.
- Sliding glass doors with missing large-missile test documentation. Replacing windows while leaving an untested slider on the back of the house leaves the biggest opening on the home unprotected. We see this constantly on mid-century homes with original aluminum sliders facing patios and pools.
Pricing for Window Installation in Wilton Manors, FL
Here’s what Wilton Manors homeowners should expect to pay for installed windows, including the permit and NOA documentation. A standard single-hung impact window runs about $800 – $1,500 per opening. Picture windows land between $900 and $2,400. Bay windows run $3,200 – $6,800 for a complete three-panel install with structural support. Casement and awning windows typically fall between $950 and $2,100 each. The biggest cost drivers are the glass package – standard insulated versus large-missile impact – and whether your existing framing needs reframing to meet current wind-load requirements. Every quote we write is a fixed number in writing. Call (754) 354-1396 for a free estimate, and you’ll get exact pricing, not a range that shifts when the crew shows up.
We Also Serve Cities Near Wilton Manors
Beyond Wilton Manors, our window installation team covers Fort Lauderdale, Davie, Oakland Park, and Tamarac. Each of those cities has its own permit quirks and code variations, and we handle them all the same way – written price, pulled permit, documented compliance. If you’re just outside Wilton Manors proper, you’re still in our service area.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Wilton Manors
Replacement windows in Wilton Manors must carry a Miami-Dade County NOA or Florida Product Approval and be installed to meet the wind-load rating shown on the permit set. Wilton Manors sits entirely within the HVHZ, which is a stricter standard than most neighboring Broward municipalities. In practice, that means impact-rated windows with design pressures of ±50 to ±60 psf depending on your home’s location and exposure. Call (754) 354-1396 and we’ll tell you exactly what rating your specific address requires.
Yes, every window replacement in Wilton Manors requires a building permit, and the installation must pass a final inspection that validates the Miami-Dade NOA on each opening. We handle the permit application, the drawings, and the inspection closeout as part of every quote. If a contractor tells you a permit isn’t necessary for impact windows in Wilton Manors, that’s a red flag – no permit means no documented compliance, ever. Get a written quote that includes permit costs from day one.
A properly permitted and documented impact window installation can qualify your home for a wind mitigation credit under Florida Statute 627.0629, which often lowers your windstorm premium. The key is documentation: the insurer needs the Miami-Dade NOA on each window, the permit closeout, and proof the installation met the wind-load rating on the permit set. On a 1960s ranch near NE 26th Drive, our crew replaced original jalousie windows with PGT impact-rated casements, and the permit closeout gave the homeowner’s insurer exactly what they needed to apply the credit. Call (754) 354-1396 to get a quote that includes all the paperwork, not just the glass.
For mid-century homes near the Middle River, we usually recommend impact-rated casement or awning windows to replace original jalousie units, and picture windows where you want a fixed view of the water. Casements seal tightly against wind-driven rain, which matters near the water, and their narrow sightlines fit the original mid-century look. Awning windows work well in kitchens and bathrooms, keeping rain out while staying open for ventilation. The common thread is impact glass and corrosion-resistant frames – salt air near the river destroys standard aluminum quickly.
A compliant Wilton Manors window quote includes five things: the permit cost and application, the Miami-Dade NOA for every window being installed, the wind-load rating specific to your address, the inspection closeout, and a written price that won’t change at the door. Cheap quotes often skip the permit, omit the NOA validation, or leave the wind-load engineering out entirely – those omissions save a few hundred dollars upfront and cost you documented compliance plus potential insurance credits for the life of the home. Every Juniper quote is a fixed number in writing with all five items included. Call (754) 354-1396 for yours.
Get a Written Price for Your Wilton Manors Window Installation
If you live in Wilton Manors and you’re tired of quotes that shift or contractors who can’t explain what HVHZ actually means for your home, call us. Sean Mackey and the Juniper Windows Fort Lauderdale team will walk your property, spec the right impact-rated windows for your exposure, and put a fixed number in writing before anything gets ordered. The 365-Day Done Right Promise covers every installation for a full year, parts and labor. Call (754) 354-1396 to schedule your free estimate, and you’ll know exactly what your windows will cost before a single screw turns.
Written by Sean Mackey, Owner at Juniper Windows Fort Lauderdale, serving Wilton Manors and surrounding Broward County.
Six Reasons Homeowners Choose Juniper Windows Fort Lauderdale
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.